Operating Instruction

121
3. Recording Modes
You can easily call up the settings you have registered using [Cust.Set Mem.].
Set the mode dial to [ ]
• The custom set you used last time ([ ], [ ], or [ ]) will be called up.
∫ To change a custom set
1
Set the mode dial to [ ].
2
Press [MENU/SET] to display the menu.
3
Press 2/1 to select the custom setting you want to use, and then
press [MENU/SET].
• Saving of the selected custom settings is displayed on
the screen.
∫ Changing the settings
Registered contents do not change when the menu setting is changed temporarily with the
mode dial set to . To change the registered settings, overwrite the registered content
using [Cust.Set Mem.] on the custom settings menu.
Recording using registered custom set
It is also possible to display the selection screen by touching the
Recording Mode icon in recording screen.
C2C2
50
i
4:
C2C 2
121
Snimanje s pomoću memoriranih prilagođenih postavki
Postavke koje ste memorirali s pomoću [Cust.Set Mem.] (Prilagođene postavke) možete
jednostavno prikazati.
Postavite funkcijski kotačić na [
C
]
• Prikazat će se prilagođene postavke koje ste upotrijebili prošli put ([
C1
], [
C2
] ili [
C3
]).
■Promjena prilagođenih postavki
1 Postavite funkcijski kotačić na [
C
].
2 Pritisnite [MENU/SET] za prikaz izbornika.
3 Pritisnite ◄/► da biste odabrali prilagođene postavke koje želite
upotrijebiti i zatim pritisnite [MENU/SET].
Također, moguće je prikazati zaslon za odabir dodirom ikone
načina snimanja na zaslonu za snimanje.
• Pohranjivanje odabranih prilagođenih postavki prikazuje
se na zaslonu.
■Promjena postavki
Memorirani sadržaj neće se promijeniti kada postavku izbornika privremeno promijenite
tako da postavite funkcijski kotačić na
C
. Da biste promijenili memorirane postavke,
pišite preko memoriranog sadržaja s pomoću opcije [Cust.Set Mem.] u izborniku za
prilagođene postavke.
121
3. Recording Modes
You can easily call up the settings you have registered using [Cust.Set Mem.].
Set the mode dial to [ ]
• The custom set you used last time ([ ], [ ], or [ ]) will be called up.
∫ To change a custom set
1
Set the mode dial to [ ].
2
Press [MENU/SET] to display the menu.
3
Press 2/1 to select the custom setting you want to use, and then
press [MENU/SET].
• Saving of the selected custom settings is displayed on
the screen.
∫ Changing the settings
Registered contents do not change when the menu setting is changed temporarily with the
mode dial set to . To change the registered settings, overwrite the registered content
using [Cust.Set Mem.] on the custom settings menu.
Recording using registered custom set
It is also possible to display the selection screen by touching the
Recording Mode icon in recording screen.
C2C2
50
i
4:
C2C 2
3. Načini snimanja