Operating Instruction

117
4. Recording Modes
This effect adds a cast of light to the scene.
Setting the light source
You can change the position and size of the light source.
1 Press [Fn1] to display the setting screen.
2 Press 3
/
4
/
2
/
1 to move the centre position of the
light source
.
The centre of the light source can be moved to the edge of
the screen.
3 Adjust the size of the light source by rotating the rear dial.
It can be changed to 4 different sizes.
Pressing [DISP.] returns the light source setting to the default setting.
4 Press [MENU/SET] to set.
Display of the recording screen will be delayed more than usual and the screen will look as if
frames are dropping.
[Sunshine]
Items that can be set
(Press 1 to display the setting screen.)
Colour Yellow tone/Red tone/Blue tone/White tone
Select the colour tone by rotating the
rear dial, and then press [MENU/SET].
Point for when placing the centre of the light
source
A more natural appearance can be created by placing
the centre of the light source outside the image.
117
3. Recording Modes
This effect adds a cast of light to the scene.
Setting the light source
You can change the position and size of the light source.
1 Press [Fn1] to display the setting screen.
Setting screen can also be displayed by touching in order of [ ] then [ ].
2 Press 3
/
4
/
2
/
1 to move the centre position of the light source.
The position of the light source can also be moved by touching the screen.
The centre of the light source can be moved to the edge of the screen.
3 Adjust the size of the light source by rotating the rear
dial.
It can be changed to 4 different sizes.
The display can also be enlarged/reduced by pinching out/pinching in.
Pressing [DISP.] will return the light source setting back to the default setting.
4 Press [MENU/SET] to set.
Display of the recording screen will be delayed more than usual and the screen will look as if
frames are dropping.
[Sunshine]
Items that can be set
Colour Yellow tone/Red tone/Blue tone/White tone
Select the colour tone by rotating
the rear dial, and then press
[MENU/SET].
Point for when placing the centre of the light
source
A more natural appearance can be created by
placing the centre of the light source outside the
image.
117
3. Recording Modes
This effect adds a cast of light to the scene.
Setting the light source
You can change the position and size of the light source.
1 Press [Fn1] to display the setting screen.
Setting screen can also be displayed by touching in order of [ ] then [ ].
2 Press 3
/
4
/
2
/
1 to move the centre position of the light source.
The position of the light source can also be moved by touching the screen.
The centre of the light source can be moved to the edge of the screen.
3 Adjust the size of the light source by rotating the rear
dial.
It can be changed to 4 different sizes.
The display can also be enlarged/reduced by pinching out/pinching in.
Pressing [DISP.] will return the light source setting back to the default setting.
4 Press [MENU/SET] to set.
Display of the recording screen will be delayed more than usual and the screen will look as if
frames are dropping.
[Sunshine]
Items that can be set
Colour Yellow tone/Red tone/Blue tone/White tone
Select the colour tone by rotating
the rear dial, and then press
[MENU/SET].
Point for when placing the centre of the light
source
A more natural appearance can be created by
placing the centre of the light source outside the
image.
117
[Sunshine] (Sunčeva svjetlost)
Ovaj efekt naglašava sunčeve zrake na sceni.
Stavke koje se mogu postaviti
Boja Žuti ton / Crveni ton / Plavi ton / Uobičajeni ton
Odaberite ton boje zakretanjem
stražnjeg kotačića, a zatim
pritisnite [MENU/SET].
Postavljanje izvora svjetla
Možete promijeniti položaj i veličinu izvora svjetla.
1 Pritisnite [Fn1] da biste prikazali zaslon za postavljanje.
Zaslon za postavljanje može se prikazati i dodirom ikone [ ], a zatim ikone [ ].
2 Pritisnite ▲/▼/◄/► da biste pomaknuli središnji položaj izvora svjetla.
Položaj izvora svjetla može se pomaknuti i dodirom zaslona.
Središte izvora svjetla može se pomaknuti na rub zaslona.
Preporuka o postavljanju središta izvora
svjetla
Prirodniji izgled može se postići stavljanjem središta
izvora svjetla izvan slike.
3 Podesite veličinu izvora svjetla zakretanjem
stražnjeg kotačića.
Može se promijeniti na 4 različite veličine.
Prikaz se također može povećati ili smanjiti udaljavanjem i približavanjem prstiju na
zaslonu.
Pritiskom na [DISP.] (Prikaz) postavka izvora svjetla vraća se na zadanu postavku.
4 Postavite pritiskom na [MENU/SET].
Prikaz zaslona za snimanje imat će veću zadršku nego što je to uobičajeno i činit će se da
kadrovi padaju.
3. Načini snimanja