Operating Instructions

32
Wi-Fi/NFC
VQT4Z68 (ENG)
1 Connect to a smartphone/tablet. (P30)
2 Select [ ] on the smartphone/tablet.
•
The recorded images are saved in the camera.
• Motion pictures can also be recorded.
• Some settings are not available.
• When this unit is in Panorama Shot Mode, remote recording
cannot be performed.
• The screen differs depending on the operating system.
1 Connect to a smartphone/tablet. (P30)
2 Select [ ] on the smartphone/tablet.
3 Drag an image.
•
The function can be assigned to the top, bottom, left or
right according to your preference.
• If an image is touched, the picture will be played back in an
enlarged size.
1 Play back the picture you want to transfer to the smartphone/tablet in the
camera.
2 Launch “Image App” on the smartphone/tablet at the transfer destination.
•
The screen for selecting the connection destination is displayed after the launch.
3 While [ ] is displayed on the connection screen of the “Image App”, touch
the smartphone/tablet to [ ] of this unit.
•
It may take time to complete the connection.
• If a connection attempt by touching fails, restart the “Image App”, and then display the
screen in step
2 again.
• When transferring multiple images, repeat steps 1 and 3. (They cannot be transferred as
a batch)
Taking pictures via a smartphone/tablet (remote recording)
Saving images stored in the camera/
Sending images in the camera to an SNS
Transferring/saving images stored in the camera easily with NFC
DMC-G6X&G6H&G6K&G6W&G6EB-VQT4Z68_eng.book 32 ページ ２０１３年４月１８日 木曜日 午後１０時３分