Operating Instructions Digital Camera Model No. DMC-FX37/DMC-FX38 Before use, please read these instructions completely. QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license therefrom.
Before Use Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Before Use Information for Your Safety WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, • DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
Before Use ∫ About the battery charger CAUTION! • DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. • DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.
Before Use ∫ Care of the camera • Do not strongly shake or bump the camera by dropping it etc. This unit may malfunction, recording pictures may no longer be possible or the lens or the LCD monitor may be damaged. • We strongly recommend you do not leave the camera in your trousers pocket when you sit down or forcefully insert it into a full or tight bag etc. Damage to the LCD monitor or personal injury may result.
Before Use ∫ About Condensation (When the lens is fogged up) • Condensation occurs when the ambient temperature or humidity changes. Be careful of condensation since it causes lens stains, fungus and camera malfunction. • If condensation occurs, turn the camera off and leave it for about 2 hours. The fog will disappear naturally when the temperature of the camera becomes close to the ambient temperature. ∫ Read together with the “Cautions for Use”.
Contents Before Use Information for Your Safety .......................2 Quick Guide ..............................................8 Standard Accessories .............................10 Names of the Components .....................11 Preparation Charging the Battery ...............................13 About the Battery (charging/number of recordable pictures) ................................15 Inserting and Removing the Card (optional)/the Battery...............................
Using the [REC] Mode Menu ..................81 • [PICTURE SIZE] ...............................81 • [QUALITY].........................................82 • [ASPECT RATIO]..............................83 • [INTELLIGENT ISO]..........................83 • [SENSITIVITY] ..................................84 • [WHITE BALANCE]...........................85 • [AF MODE]........................................87 • [QUICK AF] .......................................89 • [BURST] ...........................................
Before Use Before Use Quick Guide This is an overview of how to record and play back pictures with the camera. For each step, be sure to refer to the pages indicated in brackets. 1 plug-in type Charge the battery. (P13) • The battery is not charged when the camera is shipped. Charge the battery before use. inlet type 2 Insert the battery and the card. (P17) • When you do not use the card, you can record or play back pictures on the built-in memory. (P19) Refer to P20 when you use a card.
Before Use 4 Play back the pictures. 1 Slide the [REC]/[PLAYBACK] selector switch to [(]. 2 Select the picture you want to view.
Before Use Standard Accessories Check that all the accessories are included before using the camera. 1 2 3 4 5 6 7 8 9 Battery Pack (Indicated as battery in the text) Charge the battery before use. Battery Charger (Indicated as charger in the text) AC Cable USB Connection Cable AV Cable CD-ROM • Software: Use it to install the software to your PC.
Before Use Names of the Components 1 2 3 Flash (P51) Lens (P5, 140) Self-timer indicator (P57) AF assist lamp (P94) 4 5 6 7 8 9 LCD monitor (P49, 136) Status indicator (P18, 29, 35) [MENU/SET] button (P21) [DISPLAY] button (P49) [Q.
Before Use 11 12 13 14 15 16 11 12 Camera ON/OFF switch (P21) Zoom lever (P42) Speaker (P105) Microphone (P73, 94, 122) Shutter button (P35, 73) Mode dial (P33) 13 14 15 16 17 18 19 20 21 17 Strap eyelet • Be sure to attach the strap when using the camera to ensure that you will not drop it. 18 Lens barrel 19 [COMPONENT OUT] socket (P135) 20 [AV OUT/DIGITAL] socket (P124, 127, 133) 21 [DC IN] socket (P124, 127) • Always use a genuine Panasonic AC adaptor (optional).
Preparation Preparation Charging the Battery • Use the dedicated charger and battery. • The battery is not charged when the camera is shipped. Charge the battery before use. • Charge the battery with the charger indoors. • Charge the battery in a temperature between 10 oC to 35 oC. (The battery temperature should also be the same.) 1 Attach the battery with attention to the direction of the battery. 2 Connect the charger to the electrical outlet.
Preparation ∫ When the [CHARGE] indicator flashes • The battery temperature is excessively high or low. The charging time will be longer than normal. Also, charging may not be completed. • The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth. Note • After charging is completed, be sure to disconnect the power supply device from the electrical outlet. • The battery becomes warm after using it and during and after charging. The camera also becomes warm during use.
Preparation About the Battery (charging/number of recordable pictures) ∫ Battery indication The battery indication is displayed on the LCD monitor. [It does not appear when you use the camera with the AC adaptor (optional) connected.] • The indication turns red and blinks if the remaining battery power is exhausted. (The status indicator blinks when the LCD monitor turns off.) Recharge the battery or replace it with a fully charged battery. ∫ The battery life Number of recordable pictures Approx.
Preparation Playback time Approx. 400 min The number of recordable pictures and playback time will vary depending on the operating conditions and storing condition of the battery. ∫ Charging Charging time Approx. 120 min maximum Charging time and number of recordable pictures with the optional battery pack are the same as above. The charging time will vary slightly depending on the status of the battery and the conditions in the charging environment.
Preparation Inserting and Removing the Card (optional)/the Battery • Check that this unit is turned off. • We recommend using a Panasonic card. 1 Slide the release lever in the direction of the arrow and open the card/battery door. • Always use genuine Panasonic batteries. • If you use other batteries, we cannot guarantee the quality of this product. 2 Battery: Insert it fully being careful about the direction you insert it. Pull the lever A in the direction of the arrow to remove the battery.
Preparation Note • Remove the battery after use. Store the removed battery in the battery carrying case (supplied). • Do not remove the battery until the LCD monitor and the status indicator (green) turn off as the settings on the camera may not be stored properly. • The supplied battery is designed only for the camera. Do not use it with any other equipment. • Before removing the card or battery, turn the camera off, and wait until the status indicator has gone off completely.
Preparation About the Built-in Memory/the Card The following operations can be performed using this unit. • When a card has not been inserted: Pictures can be recorded in the built-in memory and played back. • When a card has been inserted: Pictures can be recorded on the card and played back. • Clipboard pictures (P95) are stored on the built-in memory even if a card is inserted.
Preparation Card The following types of cards can be used with this unit. (These cards are indicated as card in the text.
Preparation Setting Date/Time (Clock Set) • The clock is not set when the camera is shipped. 1 Turn the camera on. OFF ON A [MENU/SET] button B Cursor buttons 2 3 Press [MENU/SET]. Press 3/4 to select the language, and press [MENU/SET]. • The [PLEASE SET THE CLOCK] message appears. (This message does not appear in [PLAYBACK] mode.) 4 Press [MENU/SET]. MENU /SET 5 Press 2/1 to select the items (year, month, day, hour, minute, display sequence or time display format), and press 3/4 to set.
Preparation Changing the clock setting Select [CLOCK SET] in the [REC] or [SETUP] menu, and press 1. (P24) • It can be changed in steps 5 and 6 to set the clock. • The clock setting is maintained for 3 months using the built-in clock battery even without the battery. (Leave the charged battery in the unit for 24 hours to charge the built-in battery.) Note • The clock is displayed when [DISPLAY] is pressed several times during recording. • You can set the year from 2000 to 2099.
Preparation Setting the Menu The camera comes with menus that allow you to set the settings for taking pictures and playing them back just as you like and menus that enable you to have more fun with the camera and use it more easily. In particular, the [SETUP] menu contains some important settings relating to the camera’s clock and power. Check the settings of this menu before proceeding to use the camera.
Preparation Setting menu items This section describes how to select the normal picture mode settings, and the same setting can be used for the [PLAYBACK] menu and [SETUP] menu as well. Example: Setting [AF MODE] from [Ø] to [š] in the normal picture mode OFF ON 1 Turn the camera on. 2 Slide the [REC]/[PLAYBACK] selector switch to [!].
Preparation Switching to the [SETUP] menu 5 1 Press 2. 2 Press 4 to select the [SETUP] menu icon [ ]. 3 Press 1. • Select a menu item next and set it. Press 3/4 to select [AF MODE]. • Select the item at the very bottom, and press 4 to move to the second screen. 6 Press 1. • Depending on the item, its setting may not appear or it may be displayed in a different way. 7 Press 3/4 to select [š]. 8 Press [MENU/SET] to set. MENU /SET 9 Press [MENU/SET] to close the menu.
Preparation Using the quick menu By using the quick menu, some of the menu settings can be easily found. • Some of the menu items cannot be set by the modes. • When [DISPLAY] is pressed while [STABILIZER] (P93) is selected, [JITTER, SUBJ. MOVE DEMO.] can be displayed. 1 2 Press and hold [Q.MENU] when recording. Q.MENU Press 3/4/2/1 to select the menu item and the setting and then press [MENU/SET] to close the menu. A The items to be set and the settings are displayed.
Preparation Perform these settings if you need to. About the Setup Menu [CLOCK SET], [ECONOMY] and [AUTO REVIEW] are important items. Check their settings before using them. • In the Intelligent auto mode, only [CLOCK SET], [WORLD TIME], [TRAVEL DATE], [BEEP] and [LANGUAGE] can be set. For details on how to select the [SETUP] menu settings, refer to P24. U [CLOCK SET] Setting Date/Time. • Refer to P21 for details. Set the time in your home area and travel destination.
Preparation These menu settings make it easier to see the LCD monitor when you are in bright places. LCD [LCD MODE] [OFF] „ [AUTO POWER LCD]: The brightness is adjusted automatically depending on how bright it is around the camera. … [POWER LCD]: The LCD monitor becomes brighter and easier to see even when taking pictures outdoors. • The brightness of the pictures displayed on the LCD monitor is increased so some subjects may appear differently from actuality on the LCD monitor.
Preparation [HISTOGRAM] This allows you to set either to display or not display the histogram. (P50) [OFF]/[ON] You can conserve the battery life by setting these menus. Also, it will turn off the LCD monitor automatically when not in use to prevent discharge of the battery. q [ECONOMY] p [POWER SAVE]: The camera is automatically turned off if the camera has not been used for the time selected on the setting. [OFF]/[2MIN.]/[5MIN.]/[10MIN.
Preparation Set the length of time that the picture is displayed after taking it. o [AUTO REVIEW] [OFF] [1SEC.] [2SEC.] [HOLD]: The pictures are displayed until one any of the buttons is pressed. [ZOOM]: The picture is displayed for 1 second and then enlarged 4k and displayed for 1 more second.
Preparation Select the USB communication system after or before connecting the camera to your PC or your printer with the USB connection cable (supplied). x [USB MODE] y [SELECT ON CONNECTION]: Select either [PC] or [PictBridge(PTP)] if you connected the camera to a PC or a printer supporting PictBridge. { [PictBridge(PTP)]: Set after or before connecting to a printer supporting PictBridge. z [PC]: Set after or before connecting to a PC.
Preparation [FORMAT] The built-in memory or card is formatted. Formatting irretrievably deletes all the data so check the data carefully before formatting. • Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not turn the camera off during formatting. • If a card has been inserted, only the card is formatted. To format the built-in memory, remove the card. • If the card has been formatted on a PC or other equipment, format it on the camera again.
Preparation Mode switching Selecting the [REC] Mode When the [REC] mode is selected, the camera can be set to the Intelligent auto mode in which the optimal settings are established in line with the subject to be recorded and the recording conditions, or to the scene mode which enables you to take pictures that match the scene being recorded. 1 Turn the camera on. 2 Slide the [REC]/[PLAYBACK] selector switch to [!]. 3 Switching the mode by rotating the mode dial.
Preparation ∫ List of [REC] modes ¦ Intelligent auto mode (P35) The subjects are recorded using settings automatically selected by the camera. ! Normal picture mode (P39) The subjects are recorded using your own settings. Û Scene mode (P60) This allows you to take pictures that match the scene being recorded. $ Motion picture mode (P73) This mode allows you to record motion pictures with audio. ì Clipboard mode (P95) Record as a memo.
Basic [REC] mode: ñ Basic Taking pictures using the automatic function (Intelligent Auto Mode) The camera will set the most appropriate settings to match the subject and the recording conditions so we recommend this mode for beginners or those who want to leave the settings to the camera and take pictures easily. • The following functions are activated automatically. – Scene detection/[STABILIZER]/[INTELLIGENT ISO]/Face detection/[QUICK AF]/ [I.
Basic 4 Press the shutter button halfway to focus. • The focus indication 1 (green) lights when the subject is focused. • The AF area 2 is displayed around the subject’s face by the face detection function. In other cases, it is displayed at the point on the subject which is in focus. • The focus range is 5 cm (Wide)/1 m (Tele) to ¶. 5 Press the shutter button fully (push it in further), and take the picture.
Basic Scene detection When the camera identifies the optimum scene, the icon of the scene concerned is displayed in blue for 2 seconds, after which its colour changes to the usual red. ¦ > [i-PORTRAIT] [i-SCENERY] [i-MACRO] [i-NIGHT PORTRAIT] • Only when [‡] is selected [i-NIGHT SCENERY] • Only when [Œ] is selected • [¦] is set if none of the scenes are applicable, and the standard settings are set.
Basic About the flash • When [‡] is selected, [ brightness. • When [ ] or [ activated twice. ], [ ] or [ ] is set depending on the type of subject and ] is set, digital red-eye correction (P53) is enabled, and the flash is Settings in Intelligent auto mode • Only the following functions can be set in this mode.
Basic [REC] mode: · Taking pictures with your favourite settings (Normal picture mode) Many more menu items can be set and you can take pictures with greater freedom than when you take pictures in the Intelligent auto mode (P35). 1 Slide the [REC]/[PLAYBACK] selector switch to [!]. A Mode dial B [REC]/[PLAYBACK] selector switch 2 Set the mode dial to [·]. 3 Aim the AF area at the point you want to focus on. 4 Press the shutter button halfway to focus.
Basic Focusing Aim the AF area at the subject, and then press the shutter button halfway. When the subject is When the subject focused is not focused Focus A B C D E F G ¢ Focus indication On Blinks AF area White>Green White>Red Sound Beeps 2 times Beeps 4 times Focus indication AF area (normal) AF area (when using the digital zoom or when it is dark) Focus range Aperture value¢ Shutter speed¢ ISO sensitivity If correct exposure cannot be achieved, it will be displayed in red.
Basic Preventing jitter (camera shake) When the jitter alert [ ] appears, use [STABILIZER] (P93), a tripod or the self-timer (P57). • Shutter speed will be slower particularly in the following cases. Keep the camera still from the moment the shutter button is pressed until the picture appears on the screen. We recommend using a tripod. – Slow sync.
Basic [REC] mode: ñ·¿n¨ Taking Pictures with the Zoom Using the Optical Zoom/Using the Extra Optical Zoom (EZ)/Using the Digital Zoom You can zoom-in to make people and objects appear closer or zoom-out to record landscapes in wide angle. To make subjects appear even closer [maximum of 8.9k], do not set the picture size to the highest setting for each aspect ratio (X/Y/W). Even higher levels of magnification are possible when [DIGITAL ZOOM] is set to [ON] in [REC] menu.
Basic • When using the zoom function, an estimate of the focus range will appear in conjunction with the zoom display bar. (Example: 0.5 m –¶) ¢1 The magnification level differs depending on [PICTURE SIZE] and [ASPECT RATIO] setting. ¢2 The on-screen zoom indication may momentarily stop moving when you rotate the zoom lever to the extreme Tele position. You can enter the digital zoom range by continuously rotating the zoom lever to Tele or releasing the zoom lever once and then rotating it to Tele again.
Basic [PLAYBACK] mode: ¸ Playing back Pictures ([NORMAL PLAY]) 1 Slide the [REC]/[PLAYBACK] selector switch A to [(]. • Normal playback is set automatically in the following cases. – When the mode was switched from the [REC] to [PLAYBACK]. – When the camera was turned on while the [REC]/[PLAYBACK] selector switch was at [(]. • When the mode dial is set to [¨], clipboard will be displayed. Refer to “Viewing clipboard pictures” (P97) for information about playing back the clipboard.
Basic Displaying Multiple Screens (Multi Playback) Rotate the zoom lever towards [L] (W). 1 screen>12 screens>30 screens>Calendar screen display (P108) A Number of the selected picture and the total number of recorded pictures • Rotate the zoom lever towards [Z] (T) to return to the previous screen. • Pictures are not rotated for display. ∫ To return to normal playback 1 Press 3/4/2/1 to select a picture. • An icon will be displayed depending on the recorded picture and the settings. 2 Press [MENU/SET].
Basic Using the Playback Zoom Rotate the zoom lever towards [Z] (T). 1k>2k>4k>8k>16k • When you rotate the zoom lever towards [L] (W) after enlarging the picture, the magnification becomes lower. • When you change the magnification, the zoom position indication A appears for about 1 second, and the position of the enlarged section can be moved by pressing 3/4/2/1. • The more a picture is enlarged, the more its quality deteriorates.
Basic [PLAYBACK] mode: ¸ Deleting Pictures Once deleted, pictures cannot be recovered. • Pictures on the built-in memory or the card, which is being played back will be deleted. To delete a single picture 1 Select the picture to be deleted, and then press [‚]. A [DISPLAY] button B [‚] button 2 Press 2 to select [YES] and then press [MENU/SET]. MENU /SET To delete multiple pictures (up to 50) or all the pictures 1 2 3 Press [‚].
Basic ∫ When [DELETE ALL] has been selected with the [FAVORITE] (P118) setting The selection screen is displayed again. Select [DELETE ALL] or [ALL DELETE EXCEPT Ü], press 3 to select [YES] and delete the pictures. ([ALL DELETE EXCEPTÜ] cannot be selected if no pictures have been set as [FAVORITE].) Note • Do not turn the camera off while deleting (while [‚] is displayed). Use a battery with a sufficient power or the AC adaptor (optional).
Advanced (Recording pictures) Advanced (Recording pictures) About the LCD Monitor Press [DISPLAY] to change. A LCD monitor B [DISPLAY] button • When the menu screen appears, the [DISPLAY] button is not activated. During playback zoom (P46), while playing back motion pictures (P105) and during a slide show (P100), you can only select “Normal display F” or “No display H”.
Advanced (Recording pictures) ∫ Recording guide line When you align the subject on the horizontal and vertical guide lines or the cross point of these lines, you can take pictures with well-designed composition by viewing the size, the slope and the balance of the subject. A [ ]: This is used when dividing the entire screen into 3k3 for taking pictures with a well-balanced composition. B [ ]: This is used when you want to position the subject at the exact centre of the screen.
Advanced (Recording pictures) [REC] mode: ñ·¿¨ Taking Pictures using the Built-in Flash A Photo flash Do not cover it with your fingers or other objects. Switching to the appropriate flash setting Set the flash to match the recording. 1 2 Press 1 [‰]. 3 Press [MENU/SET]. Press 3/4 to select a mode. • You can also press 1 [‰] to select. • For information about flash settings that can be selected, refer to “Available flash settings by recording mode”.
Advanced (Recording pictures) Item ‡: AUTO : AUTO/Red-eye reduction¢ ‰: Forced flash ON : Forced ON/Red-eye reduction¢ : Slow sync./Red-eye reduction¢ Œ: Forced flash OFF Description of settings The flash is automatically activated when the recording conditions make it necessary. The flash is automatically activated when the recording conditions make it necessary.
Advanced (Recording pictures) ∫ About the digital red-eye correction When the flash is used with the Red-eye reduction ([ ], [ automatically detect and correct the red-eye in the image data. ], [ ]) selected, it will ¢ It may not be able to correct the red-eye depending on the recording conditions. It may also correct objects other than red-eye. ∫ Available flash settings by recording mode The available flash settings depend on the recording mode.
Advanced (Recording pictures) ∫ The available flash range to take pictures • The available flash range is an approximation. Available flash range ISO sensitivity Wide Tele AUTO 60 cm to 6.0 m 1.0 m to 2.8 m ISO100 60 cm to 1.9 m 1.0 m ISO200 60 cm to 2.7 m 1.0 m to 1.2 m ISO400 60 cm to 3.8 m 1.0 m to 1.8 m ISO800 80 cm to 5.4 m 1.0 m to 2.5 m 1.0 m to 3.6 m • In [HIGH SENS.] (P66) in scene mode, the ISO sensitivity automatically switches to between ISO1600 1.15 m to 7.
Advanced (Recording pictures) ∫ Shutter speed for each flash setting Flash setting Shutter speed (Sec.) Flash setting Shutter speed (Sec.) 1¢1 to 1/2000th 1 or 1/4th to 1/2000th¢2 ‡ 1/30¢1 to 1/2000th ‰ Œ 1¢1 to 1/2000th 1 or 1/4th to 1/2000th¢2, 3 ¢1 It may vary depending on the [MIN. SHTR SPEED] setting (P93). ¢2 When Intelligent ISO is set (P83) ¢3 [SPORTS], [BABY1]/[BABY2] and [PET] in scene mode (P60) • ¢2, 3: The shutter speed becomes a maximum of 1 second in the following cases.
Advanced (Recording pictures) [REC] mode: ·n Taking Close-up Pictures This mode allows you to take close-up pictures of a subject, e.g. when taking pictures of flowers. You can take pictures of a subject as close as 5 cm from the lens by rotating the zoom lever upmost to Wide (1k). 1 Press 4 [#]. • In macro mode, [ press 4 again. 2 ] is displayed. To cancel, Take the pictures. ∫ Focus range ¢ The focus range changes in steps. T W 1m 5 cm Note • We recommend using a tripod and the self-timer.
Advanced (Recording pictures) [REC] mode: ñ·¿¨ Taking Pictures with the Self-timer 1 Press 2 [ë]. 2 Press 3/4 to select a mode. 3 Press [MENU/SET]. • You can also press 2 [ë] to select. • You can also press the shutter button halfway to finish. • The menu screen disappears after about 5 seconds. At this time, the selected item is automatically set. 4 Press the shutter button halfway to focus and then press it fully to take the picture.
Advanced (Recording pictures) [REC] mode: ·¿n¨ Compensating the Exposure Use this function when you cannot achieve appropriate exposure due to the difference in brightness between the subject and the background. Look at the following examples. Under exposed Properly exposed Compensate the exposure towards positive. 1 Overexposed Compensate the exposure towards negative. Press 3 [È] until [EXPOSURE] appears, compensate the exposure with 2/1. • Select [0 EV] to return to the original exposure.
Advanced (Recording pictures) [REC] mode: ·¿ Taking Pictures using Auto Bracket In this mode, 3 pictures are automatically recorded in the selected exposure compensation range each time the shutter button is pressed. You can select the picture with the desired exposure from the 3 pictures with different exposures. With auto bracket d1 EV 1 1st picture 2nd picture 3rd picture d0 EV j1 EV i1 EV Press 3 [È] until [AUTO BRACKET] appears, set the compensation range of the exposure with 2/1.
Advanced (Recording pictures) [REC] mode: ¿ Taking pictures that match the scene being recorded (Scene mode) When you select a scene mode to match the subject and recording situation, the camera sets the optimal exposure and hue to obtain the desired picture. 1 2 3 Slide the [REC]/[PLAYBACK] selector switch to [!]. Set the mode dial to [¿]. Press 3/4/2/1 to select the scene mode. • You can switch menu screens from any menu item by rotating the zoom lever. 4 Press [MENU/SET] to set.
Advanced (Recording pictures) [PORTRAIT] When taking pictures of people outdoors during the daytime, this mode allows you to improve the appearance of the persons concerned and make their skin tones look healthier. ∫ Technique for Portrait mode To make this mode more effective: 1 Rotate the zoom lever as far as possible to Tele. 2 Move close to the subject to make this mode more effective. Note • The initial setting for [AF MODE] is [š].
Advanced (Recording pictures) [SELF PORTRAIT] Select this to take pictures of yourself. ∫ Technique for Self portrait mode • Press the shutter button halfway to focus. The self-timer indicator lights up when you are brought into focus. Making sure you hold the camera still, press the shutter button fully to take the picture. • The subject is not focused when the self-timer indicator is blinking. Make sure to press the shutter button halfway again to focus.
Advanced (Recording pictures) [NIGHT PORTRAIT] This allows you to take pictures of a person and the background with near real-life brightness. ∫ Technique for Night portrait mode ].) • Use the flash. (You can set to [ • Since the shutter speed becomes slower, we recommend using a tripod and the self-timer for taking pictures. • Ask the subject not to move while taking a picture. • We recommend rotating the zoom lever to Wide (1k) and being about 1.5 m from the subject when taking a picture.
Advanced (Recording pictures) [PARTY] Select this when you want to take pictures at a wedding reception, an indoor party etc. This allows you to take pictures of people and the background with near real-life brightness. ∫ Technique for Party mode ] or [ ].) • Use the flash. (You can set to [ • We recommend using a tripod and the self-timer for taking pictures. • We recommend rotating the zoom lever to Wide (1k) and being about 1.5 m from the subject when taking pictures.
Advanced (Recording pictures) [BABY1]/[BABY2] This takes pictures of a baby with a healthy complexion. When you use the flash, the light from it is weaker than usual. It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can select to have these appear at the time of playback, or have them stamped on the recorded image using [TEXT STAMP] (P111). ∫ Birthday/Name setting 1 Press 3/4 to select [AGE] or [NAME] and then press 1. 2 Press 3/4 to select [SET] and then press [MENU/SET].
Advanced (Recording pictures) [PET] Select this when you want to take pictures of a pet such as a dog or a cat. You can set your pet’s birthday and name. You can select to have these appear at the time of playback, or have them stamped on the recorded image using [TEXT STAMP] (P111). For information about [AGE] or [NAME], refer to [BABY1]/[BABY2] on P65. Note • The initial setting for the AF assist lamp is [OFF]. • [INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO800].
Advanced (Recording pictures) [HI-SPEED BURST] This is a convenient mode for shooting rapid movement or a decisive moment. ∫ Picture size and aspect ratio 1 2 Press 3/4 to select the picture size and aspect ratio and then press [MENU/SET] to set. • 3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size. Take pictures. • Still pictures are taken continuously while the shutter button is pressed fully. Maximum Burst speed approx. 6 pictures/second Number of recordable pictures approx.
Advanced (Recording pictures) [FLASH BURST] Still pictures are taken continuously with flash. It is convenient to take continuous still pictures in dark places. ∫ Picture size and aspect ratio 1 Press 3/4 to select the picture size and aspect ratio and then press [MENU/SET] to set. • 3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size. 2 Take pictures. • Still pictures are taken continuously while the shutter button is pressed fully. Number of recordable pictures max.
Advanced (Recording pictures) [STARRY SKY] This allows you to take vivid pictures of a starry sky or a dark subject. ∫ Setting the shutter speed Select a shutter speed of [15 SEC.], [30 SEC.] or [60 SEC.]. 1 Press 3/4 to select the number of seconds and then press [MENU/SET]. • It is also possible to change the number of seconds using the quick menu. (P26) 2 Take pictures. • Press the shutter button fully to display the countdown screen. Do not move the camera after this screen is displayed.
Advanced (Recording pictures) [BEACH] This allows you to take even more vivid pictures of the blue colour of the sea, sky etc. It also prevents under exposure of people under strong sunlight. Note • The initial setting for [AF MODE] is [š]. • Do not touch the camera with wet hands. • Sand or seawater will cause the camera to malfunction. Make sure that sand or seawater does not get into the lens or the terminals.
Advanced (Recording pictures) [PIN HOLE] Picture is taken darker and with soft focus around the subjects. ∫ Picture size and aspect ratio Press 3/4 to select the picture size and aspect ratio and then press [MENU/SET] to set. • 3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size. Note • [QUALITY] is automatically fixed to [›]. • You can take pictures suitable for 4qk6q/10k15 cm printing. • The focus range becomes the same as macro mode.
Advanced (Recording pictures) [UNDERWATER] Use the marine case (DMW-MCFX35; optional). This allows you to take pictures with a natural colour. Fixing the focus underwater (AF Lock) You can fix the focus before taking a picture with AF lock. This is useful if you want to take pictures of a fast moving subject etc. 1 Aim the AF area at the subject. A 2 Press 2 to fix the focus. • The AF lock icon A appears when the subject is focused. • Press 2 again to cancel AF lock.
Advanced (Recording pictures) [REC] mode: n Advanced (Recording pictures) Motion Picture Mode 1 Slide the [REC]/[PLAYBACK] selector switch to [!]. 2 Set the mode dial to [n]. 3 Press the shutter button halfway to focus and then press it fully to start recording. A Audio recording • The available recording time B is displayed on the top right and the elapsed recording time C is displayed on the bottom right of the screen. • After pressing the shutter button fully, release it straight away.
Advanced (Recording pictures) Changing the settings for the picture quality • When you set the picture quality to [ ], [ ] or [ ], we recommend using a high-speed card with “10MB/s” or greater displayed on the package. 1 Press [MENU/SET]. 2 Press 3/4 to select [PICTURE MODE] and then press 1. 3 Press 3/4 to select the item and then press [MENU/SET].
Advanced (Recording pictures) Note • Refer to P161 for information about the available recording time. • The available recording time displayed on the screen may not decrease regularly. • Depending on the type of the card, the card access indication may appear for a while after recording motion pictures. This is not a malfunction. • Motion pictures can be recorded continuously up to 2 GB. The maximum available recording time for up to 2 GB only is displayed on the screen.
Advanced (Recording pictures) [REC] mode: ñ·¿n Useful Functions at Travel Destinations Recording which Day of the Vacation You Take the Picture For details on the [SETUP] menu settings, refer to P24. If you set the departure date or the travel destination of the vacation in advance, the number of days that have passed since the departure date (which day of the vacation it is) is recorded when you take the picture.
Advanced (Recording pictures) 5 Press 3/4/2/1 to set the return date (year/month/ day), and then press [MENU/SET]. • If you do not want to set the return date, press [MENU/SET] while the date bar is displayed. 6 Press 4 to select [LOCATION] and then press 1. 7 Press 4 to select [SET] and then press [MENU/ SET]. 8 Enter the location. 9 Press [MENU/SET] twice to close the menu. 10 • For details on how to enter characters, read the [TITLE EDIT] section on P109. Take a picture.
Advanced (Recording pictures) ∫ Cancelling the travel date The travel date is automatically cancelled if the current date is after the return date. If you want to cancel the travel date before the end of the vacation, select [OFF] on the screen shown in step 3 or 7 and then press [MENU/SET] twice. If the [TRAVEL SETUP] is set to [OFF] in step 3, [LOCATION] will be also set to [OFF]. Note • The travel date is calculated using the date in the clock setting and the departure date you set.
Advanced (Recording pictures) Recording Dates/Times at Overseas Travel Destinations (World Time) For details on the [SETUP] menu settings, refer to P24. You can display the local times at the travel destinations and record them on the pictures you take. • Select [CLOCK SET] to set the current date and time in advance. (P21) 1 Select [WORLD TIME] from the [SETUP] menu, and then press 1. • When first using the camera after purchasing it, the [PLEASE SET THE HOME AREA] message appears.
Advanced (Recording pictures) 4 Press 3 to select [DESTINATION] and then press [MENU/SET] to set. C Depending on the setting, the time at the travel destination C area or the home area is displayed. 5 Press 2/1 to select the area the travel destination is in and then press [MENU/SET] to set. D E D Current time of the destination area E Time difference • If daylight saving time [ ] is used at the travel destination, press 3. (The time advances by one hour.) Press 3 again to return to the original time.
Advanced (Recording pictures) Using the [REC] Mode Menu [PICTURE SIZE] For details on [REC] mode menu settings, refer to P24. Set the number of pixels. The higher the numbers of pixels, the finer the detail of the pictures will appear even when they are printed onto large sheets. Applicable modes: ñ·¿ ∫ When the aspect ratio is [X]. ¢ This item cannot be set in the Intelligent auto mode.
Advanced (Recording pictures) Note • “EZ” is an abbreviation of “Extra optical Zoom”. • A digital picture is made of numerous dots called pixels. The higher the numbers of pixels, the finer the picture will be when it is printed on a large piece of paper or displayed on a PC monitor. A Many pixels (Fine) B Few pixels (Rough) ¢ These pictures are examples to show the effect. • If you change the aspect ratio, set the picture size again. • The extra optical zoom does not work in [TRANSFORM], [HIGH SENS.
Advanced (Recording pictures) [ASPECT RATIO] For details on [REC] mode menu settings, refer to P24. This allows you to select the aspect ratio of the pictures to suit printing or the playback method. Applicable modes: ñ·¿ [X]: [ASPECT RATIO] of a 4:3 TV [Y]: [ASPECT RATIO] of a 35 mm film camera [W]: [ASPECT RATIO] of a high-definition TV, etc. [X] [Y] [W] Note • The ends of the recorded pictures may be cut at printing so check before printing.
Advanced (Recording pictures) [SENSITIVITY] For details on [REC] mode menu settings, refer to P24. This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure enables pictures to be taken even in dark places without the resulting pictures coming out dark.
Advanced (Recording pictures) [WHITE BALANCE] For details on [REC] mode menu settings, refer to P24. In sunlight, under incandescent lights or in other such conditions where the colour of white takes on a reddish or bluish tinge, this item adjusts to the colour of white which is closest to what is seen by the eye in accordance with the light source.
Advanced (Recording pictures) ∫ Finely adjusting the white balance [ ] You can finely adjust the white balance when you cannot acquire the desired hue by setting the white balance. • Set the white balance to [V]/[Ð]/[î]/[Ñ]/[Ò]. 1 Press 3 [È] several times until [WB ADJUST.] appears and then press 2/1 to adjust the white balance. 2 2 [RED]: Press when the hue is bluish. 1 [BLUE]: Press when the hue is reddish. • Select [0] to return to the original white balance. Press [MENU/SET] to finish.
Advanced (Recording pictures) [AF MODE] For details on [REC] mode menu settings, refer to P24. This allows the focusing method that suits the positions and number of the subjects to be selected. Applicable modes: ·¿n [š]: Face detection The camera automatically detects the person’s face. The focus and exposure can then be adjusted to fit that face no matter what portion of the picture it is in. (max. 15 areas) [ ]: AF Tracking Focus can be adjusted to a specified subject.
Advanced (Recording pictures) Note • The camera is focusing on all the AF areas when multiple AF areas (max. 11 areas) light at the same time in [ ]. If you want to determine the focus position to take pictures, switch the AF mode to [ƒ], [Ø] or [Ù]. • If the AF mode is set to [ ], the AF area is not displayed until the picture is brought into focus. • Switch the AF mode to [ƒ] or [Ø] if it is difficult to focus using [Ù]. • The camera may detect the subjects other than a person as the face.
Advanced (Recording pictures) ∫ About [ƒ] • You can focus on the subject more quickly than in other AF modes. • The picture may stop moving for a moment before being brought into focus when you press the shutter button halfway. This is not a malfunction. ∫ Setting up [ 1 ] (AF Tracking) Bring the subject to the AF tracking frame, and press 4 to lock the subject • AF tracking frame will continuously focus on Before locking Locked the subject's movement once the subject is recognised.
Advanced (Recording pictures) [BURST] For details on [REC] mode menu settings, refer to P24. Pictures are taken continuously while the shutter button is pressed. Select the ones you really like from among the pictures you have taken. Applicable modes: ñ·¿ [OFF] ˜ ò Burst speed (pictures/ second) — 2.5¢ approx. 2 A — max. 3 › — max. 5 Depends on the remaining capacity of the built-in memory/card.
Advanced (Recording pictures) [I.EXPOSURE] For details on [REC] mode menu settings, refer to P24. Contrast and exposure will be adjusted automatically when there is a big difference in brightness between the background and subject, to bring the image close to how you see. Applicable modes: · [OFF]/[ON] Note • When [ON] is set, [ ] is displayed on the screen. • Even when the [SENSITIVITY] is set to [ISO100], [SENSITIVITY] may be set higher than [ISO100] if the picture is taken with [I.
Advanced (Recording pictures) [COLOR MODE] For details on [REC] mode menu settings, refer to P24. Using these modes, the pictures can be made sharper or softer, the colours of the pictures can be turned into sepia colours or other colour effects can be achieved. Applicable modes: ñ·n [STANDARD]: This is the standard setting. [NATURAL]: The picture becomes softer. [VIVID]: The picture becomes sharper. [B/W]: The picture becomes black and white. [SEPIA]: The picture becomes sepia.
Advanced (Recording pictures) [STABILIZER] For details on [REC] mode menu settings, refer to P24. Using one of these modes, jitter during picture taking is detected, and the camera automatically compensates the jitter, enabling jitter-free images to be taken. Applicable modes: ·¿n [OFF] [AUTO]: The optimum jitter compensation is selected depending on the condition. [MODE1]: Jitter is always compensated during [REC] mode. [MODE2]: The jitter is compensated for when the shutter button is pressed.
Advanced (Recording pictures) [AUDIO REC.] For details on [REC] mode menu settings, refer to P24. Audio can be recorded simultaneously with the image. You can record the conversation during the shooting or the situation as a memo. Applicable modes: ·¿ [OFF]: Audio will not be recorded. [ON]: [B] is displayed on the screen. Audio will be recorded as soon as the image is recorded. (It will stop in 5 seconds) • If you press [MENU/SET] during audio recording, the audio recording is cancelled.
Advanced (Recording pictures) Mode dial: ¨ Taking and viewing clipboard pictures (Clipboard mode) This setting is useful when taking pictures of timetables, route maps or other information instead of taking notes. Regardless of whether a card is present or not, the data is stored in the dedicated clipboard folder of the built-in memory so it can be differentiated from the regular taken pictures and made available for immediate viewing.
Advanced (Recording pictures) Clipboard recording menu The menu screen appears when [MENU/SET] is pressed during clipboard picture recording. 1 Press 3/4 to select the menu item and then press 1. Item Description of setting Used to change the picture size. [PICTURE SIZE] 2M : initial setting (Prefer quality) 1M : prefer quantity [AUDIO REC.] Used to record sound (5 seconds) together with the pictures. ¢This setting is not reflected in [AUDIO REC.] (P94) in the [REC] mode menu.
Advanced (Recording pictures) Viewing clipboard pictures 1 Slide the [REC]/[PLAYBACK] selector switch to [(]. 2 Set the mode dial to [¨]. 3 Press 2/1 to move the picture. 2: Play back the previous picture. 1: Play back the next picture. • When the zoom lever is turned to [L] (W), a screen showing 12 pictures appears. To return to the full-screen display, turn the zoom lever to [Z] (T). ∫ Deleting clipboard pictures The steps taken are the same as for normal deletion. Refer to P47.
Advanced (Recording pictures) Clipboard playback menu When [MENU/SET] is pressed during clipboard playback, the menu screen appears. (The steps taken are the same as for the “Clipboard recording menu” (P96).) Item [CANCEL MARK] Description of setting Used to release the zoom position. 1 Press 2/1 to select a clipboard pictures with zoom mark [ 2 Press [MENU/SET] to cancel. Used to add sound after the clipboard pictures are recorded. [AUDIO DUB.] 1 Press 2/1 to select the picture.
Advanced (Recording pictures) Settings During Clipboard • Following functions are fixed. Item [GUIDE LINE] ([REC. INFO.]) Description of settings [OFF] [GUIDE LINE] ([PATTERN]) Item Description of settings [ASPECT RATIO] X [SENSITIVITY] [AUTO] [ECONOMY] ([POWER SAVE]) 5 minutes [WHITE BALANCE] [AWB] [ECONOMY] ([AUTO LCD OFF]) [OFF] [AF MODE] Ø [SELFTIMER] 2 seconds [AF ASSIST LAMP] [ON] [QUALITY] › • In the clipboard mode, the following functions cannot be used.
Advanced (Playback) [PLAYBACK] mode: ¸ Advanced (Playback) Playing Back Pictures in Sequence (Slide Show) You can play back the pictures you have taken in synchronisation with music, and you can do this in sequence while leaving a fixed interval between each of the pictures. Furthermore, you can play back the pictures grouped together by category or play back only those pictures you have set as favourites as a slide show.
Advanced (Playback) When [CATEGORY SELECTION] has been selected in step 4 5 Press 3/4/2/1 to select the category to play back and then press [MENU/SET] to set. • For details on categories, refer to P103. 6 Press 3 to select [START] and then press [MENU/ SET]. 7 Press 4 to finish the slide show. • Normal playback resumes after the slide show finishes. ∫ Operations performed during slide show The cursor displayed during playback is the same as 3/4/2/1.
Advanced (Playback) ∫ Changing the slide show settings You can change the settings for slide show playback by selecting [EFFECT] or [SETUP] on the slide show menu screen. [EFFECT] This allows you to select the screen effects or music effects when switching from one picture to the next. [NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO] • When [URBAN] has been selected, the picture may appear in black and white as a screen effect. • [AUTO] can be used only when [CATEGORY SELECTION] has been selected.
Advanced (Playback) [PLAYBACK] mode: ¸ Selecting Pictures and Playing them Back ([CATEGORY PLAY]/[FAVORITE PLAY]) [CATEGORY PLAY] This mode allows you to search images by scene mode or other categories (such as [PORTRAIT], [SCENERY] or [NIGHT SCENERY]) and sort the pictures into each of the categories. You can then play back the pictures in each category. 1 2 3 Perform steps 1 and 2 on page 100. Press 3/4 to select [CATEGORY PLAY], and then press [MENU/SET].
Advanced (Playback) [FAVORITE PLAY] You can play back the pictures you have set as [FAVORITE] (P118) (Only when [FAVORITE] is set to [ON] and there are pictures which have been set to [FAVORITE]). 1 2 Perform steps 1 and 2 on page 100. Press 3/4 to select [FAVORITE PLAY], and then press [MENU/SET]. Note • You can use only [ROTATE], [ROTATE DISP.], [DPOF PRINT], [PROTECT] or [AUDIO DUB.] in the [PLAYBACK] menu.
Advanced (Playback) [PLAYBACK] mode: ¸ Playing Back Motion Pictures/Pictures with Audio Motion pictures Press 2/1 to select a picture with a motion picture icon (such as [ ]), and then press 3 to play back. C B A A The motion picture recording time B Motion picture icon C Motion picture playback icon • After playback starts, the elapsed playback time is displayed on the upper right of the screen. For example, 8 minutes and 30 seconds is displayed as [8m30s].
Advanced (Playback) [PLAYBACK] mode: ¸ Creating still pictures from a motion picture You can create a single still picture (with 1 screen or 9 screens) from a recorded motion picture. This is effective in moving scenes when you want to look carefully at the movement of a sportsperson etc. 1 Press 3 to pause motion picture playback.
Advanced (Playback) Picture size Item / / 1 picture 9 pictures 2M 2M 0.3 M 2M 0.3 M 1M • [QUALITY] is fixed to [›]. Note • You may not be able to save still pictures from a motion picture taken on other equipment.
Advanced (Playback) [PLAYBACK] mode: ¸ Using the [PLAYBACK] mode menu You can use various functions in playback mode to rotate pictures, set protection for them etc. • With [TEXT STAMP], [RESIZE], [TRIMMING], [LEVELING] or [ASPECT CONV.], a new edited picture is created. A new picture cannot be created if there is no free space on the built-in memory or the card so we recommend checking that there is free space and then editing the picture. [CALENDAR] You can display pictures by recording date.
Advanced (Playback) [TITLE EDIT] You can add text (comments) to pictures. After text has been registered, it can be included in prints using [TEXT STAMP] (P111). (Only alphabetic characters and symbols can be entered.) 1 Select [TITLE EDIT] on the [PLAYBACK] mode menu. (P24) 2 Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. 3 Select the picture, and then press [MENU/SET] to set.
Advanced (Playback) ∫ Delete the title [SINGLE] setting 1 In step 4 when [SINGLE] (P109) is selected, delete all the texts, select [EXIT], and press [MENU/SET]. 2 Press [‚]. 3 Press [MENU/SET] to close the menu. [MULTI] setting 1 In step 4, delete all the texts, select [EXIT], and press [MENU/SET]. 2 Press [MENU/SET] to close the menu. Note • Text can be scrolled if all of the registered text does not fit on the screen.
Advanced (Playback) [TEXT STAMP] You can stamp the recording date/time, age, travel date or title onto the recorded pictures. It is suitable for regular size printing. (Pictures with a picture size larger than [ ] will be resized when stamping the date etc. on them.) 1 Select [TEXT STAMP] on the [PLAYBACK] mode menu. (P24) 2 Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. 3 Select the picture, and then press [MENU/SET] to set.
Advanced (Playback) 5 Press [MENU/SET]. • If you set [TEXT STAMP] for a picture with a picture size larger than [ ], the picture size will become smaller as shown below. Aspect ratio setting Picture size / X Y W • The picture becomes slightly rougher. 6 / > / / > / / > Press 3 to select [YES] and then press [MENU/ SET]. • The message [SAVE NEW PICTURES?] appears if the picture was recorded with a picture size [ 7 ] or less. Press [‚] to return to the menu screen.
Advanced (Playback) [RESIZE] Reducing the picture size (number of pixels) We recommend resizing to [ ] if you want to attach a picture to an e-mail or use it on a website. (Pictures set to the minimum number of pixels for [ASPECT RATIO] cannot be further reduced in size.) 1 Select [RESIZE] on the [PLAYBACK] mode menu. (P24) 2 Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. 3 Select the picture and size.
Advanced (Playback) [TRIMMING] You can enlarge and then clip the important part of the recorded picture. 1 Select [TRIMMING] on the [PLAYBACK] mode menu. (P24) 2 Press 2/1 to select the picture, and then press [MENU/SET]. 3 Use the zoom lever and press 3/4/2/1 to select the parts to be trimmed. Reduction Zoom lever (T): Enlargement Zoom lever (W): Reduction 3/4/2/1: Move Enlargement () Move the position () 4 Press [MENU/SET]. 5 Press 3 to select [YES] and then press [MENU/ SET].
Advanced (Playback) [LEVELING] Minute tilting of the image can be adjusted. 1 Select [LEVELING] on the [PLAYBACK] mode menu. (P24) 2 Press 2/1 to select the picture, and then press [MENU/SET]. 3 Press 2/1 to adjust the tilting, and press [MENU/ SET]. 1: clockwise 2: counter-clockwise • Up to 2 o can be adjusted. 4 Press 3 to select [YES] and then press [MENU/ SET]. 5 Press [‚] to return to the menu screen. • Press [MENU/SET] to close the menu.
Advanced (Playback) [ASPECT CONV.] You can convert pictures taken with a [W] aspect ratio to a [Y] or a [X] aspect ratio. 1 Select [ASPECT CONV.] on the [PLAYBACK] mode menu. (P24) 2 Press 3/4 to select [Y] or [X] and then press [MENU/SET]. 3 Press 2/1 to select a picture taken with [W] aspect ratio, and then press [MENU/SET]. 4 Press 2/1 to determine the horizontal position, and press [MENU/SET] to set. • Use 3/4 to set the frame position for pictures rotated vertically.
Advanced (Playback) [ROTATE]/[ROTATE DISP.] This mode allows you to automatically display pictures vertically if they were recorded holding the camera vertically or rotate pictures manually in 90o steps. Rotate (The picture is rotated manually) 1 Select [ROTATE] on the [PLAYBACK] mode menu. (P24) 2 Press 2/1 to select the picture and then press [MENU/SET]. • The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF]. • Motion pictures and protected pictures cannot be rotated.
Advanced (Playback) [FAVORITE] You can do the following if a mark has been added to pictures and they have been set as favourites. • Play back only the pictures set as favourites. ([FAVORITE PLAY]) • Play back the pictures set as favourites only as a slide show. • Delete all the pictures not set as favourites. ([ALL DELETE EXCEPTÜ]) 1 2 Select [FAVORITE] on the [PLAYBACK] mode menu. (P24) Press 4 to select [ON] and then press [MENU/SET].
Advanced (Playback) [DPOF PRINT] DPOF “Digital Print Order Format” is a system that allows the user to select which pictures to print, how many copies of each picture to print and whether or not to print the recording date on the pictures when using a DPOF compatible photo printer or photo printing store. For details, ask at your photo printing store. When you want to use a photo printing store to print pictures recorded on the built-in memory, copy them to a card (P123) and then set the DPOF setting.
Advanced (Playback) ∫ Cancelling all the [DPOF PRINT] settings 1 Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET]. 2 Press 3 to select [YES] and then press [MENU/SET]. 3 Press [MENU/SET] to close the menu. • You cannot select [CANCEL] if not even one picture has been set for DPOF printing. ∫ To print the date After setting the number of prints, set/cancel printing with the recording date by pressing [DISPLAY].
Advanced (Playback) [PROTECT] You can set protection for pictures you do not want to be deleted by mistake. 1 Select [PROTECT] on the [PLAYBACK] mode menu. (P24) 2 Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. 3 Select the picture, and then press [MENU/SET]. [SINGLE] [MULTI] When [MULTI] has been selected • Repeat these steps for each picture. • The settings are cancelled when [MENU/ SET] is pressed again. Press 2/1 to select the picture.
Advanced (Playback) [AUDIO DUB.] You can add the audio after taking a picture. 1 Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P24) 2 Press 2/1 to select the picture and then press [MENU/SET] to start audio recording. • The message [OVERWRITE AUDIO DATA?] screen appears when audio has already been recorded. Press 3 to select [YES] and then press [MENU/SET] to start audio recording. (The original audio is overwritten.) • Audio is recorded from the built-in microphone on the camera.
Advanced (Playback) [COPY] You can copy data of pictures you have shot from the built-in memory onto a card, from a card into the built-in memory or from a card into the dedicated clipboard folder. 1 2 Select [COPY] on the [PLAYBACK] mode menu. (P24) Press 3/4 to select the copy destination and then press [MENU/SET]. : All the picture data in the built-in memory are copied onto the card at one time. > step 4. : One picture at a time is copied from the card to the built-in memory. > step 3.
Connecting to other equipment Connecting to other equipment Connecting to a PC You can acquire recorded pictures to a PC by connecting the camera and the PC. • You can easily print out or mail the pictures you have imported. Use of the “PHOTOfunSTUDIO-viewer-” bundled software on the CD-ROM (supplied) is a convenient way of doing this. • Read the separate operating instructions for the supplied software for more information about the software in the CD-ROM (supplied) and how to install it.
Connecting to other equipment 3 Double-click on [Removable Disk] in [My Computer]. • When using a Macintosh, the drive is displayed on the desktop. (“LUMIX”, “NO_NAME” or “Untitled” is displayed.) 4 Double-click [DCIM] folder. 5 Using a drag-and-drop operation, move the pictures you want to acquire or the folder storing those pictures to any different folder on the PC.
Connecting to other equipment ∫ Disconnecting the USB connection cable safely • Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the digital camera before removing the hardware. Note • Turn the camera off before connecting or disconnecting the AC adaptor (optional). • Before inserting or removing a card, turn the camera off and disconnect the USB connection cable.
Connecting to other equipment Printing the Pictures If you connect the camera to a printer supporting PictBridge, you can select the pictures to be printed out and instruct that printing be started on the camera’s LCD monitor. Preparations: Turn on the camera and the printer. Remove the card before printing the pictures in the built-in memory. Perform the print quality and other settings at the printer before printing the pictures. Set the mode dial to anything except [¨].
Connecting to other equipment Note • Do not use any other USB connection cables except the supplied one. Use of cables other than the supplied USB connection cable may cause malfunction. • Turn the camera off before connecting or disconnecting the AC adaptor (optional). • Before inserting or removing a card, turn the camera off, and disconnect the USB connection cable. • You cannot switch between the built-in memory and the card while the camera is connected to the printer.
Connecting to other equipment Selecting multiple pictures and printing them 1 Press 3. 2 Press 3/4 to select an item and then press [MENU/ SET]. • If the print check screen has appeared, select [YES], and print the pictures. PictBridge MULTI SELECT SELECT ALL DPOF PICTURE FAVORITE CANCEL Item SELECT SET MENU Description of settings [MULTI SELECT] Multiple pictures are printed at one time.
Connecting to other equipment Print Settings Select and set the items both on the screen in step 2 of the “Selecting a single picture and printing it” and in step 3 of the “Selecting multiple pictures and printing them” procedures. • When you want to print pictures in a paper size or a layout which is not supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] to [{] and then set the paper size or the layout on the printer. (For details, refer to the operating instructions of the printer.
Connecting to other equipment [PAPER SIZE] Item Description of settings { Settings on the printer are prioritised. [L/3.5qk5q] 89 mmk127 mm [2L/5qk7q] 127 mmk178 mm [POSTCARD] 100 mmk148 mm [16:9] 101.6 mmk180.6 mm [A4] 210 mmk297 mm [A3] 297 mmk420 mm [10k15cm] 100 mmk150 mm [4qk6q] 101.6 mmk152.4 mm [8qk10q] 203.2 mmk254 mm [LETTER] 216 mmk279.4 mm [CARD SIZE] 54 mmk85.6 mm • Paper sizes not supported by the printer will not be displayed.
Connecting to other equipment [PAGE LAYOUT] (Layouts for printing that can be set with this unit) Item Description of settings { Settings on the printer are prioritised. á 1 picture with no frame on 1 page â 1 picture with a frame on 1 page ã 2 pictures on 1 page ä 4 pictures on 1 page • An item cannot be selected if the printer does not support the page layout.
Connecting to other equipment [PLAYBACK] mode: ¸ Playing Back Pictures on a TV Screen Playing back pictures using the AV cable (supplied) COMPONENT OUT Preparations: Set the [TV ASPECT]. (P31) Turn this unit and the TV off. AV OUT/ DIGITAL DC IN 1 Yellow: to the video input socket 2 White: to the audio input socket A Align the marks, and insert. B AV cable (supplied) • Check the directions of the connectors, and plug them straight in or unplug them straight out.
Connecting to other equipment Playing back pictures on a TV with an SD Memory Card slot Still pictures recorded on an SD Memory Card can be played back on a TV with an SD Memory Card slot. Note • Depending on the TV model, pictures may not be displayed on the full screen. • Motion pictures cannot be played back. To play back motion pictures, connect the camera to the TV with the AV cable (supplied). • You cannot play back pictures on SDHC cards if the TV does not support these cards.
Connecting to other equipment Playing back on the TV with component socket You can enjoy high quality pictures and motion pictures on the TV by connecting the camera with the TV using component cable (DMW-HDC2: optional). Component output is output as 1080i. Connect with a TV compatible with the 1080i. Preparations: Turn this unit and the TV off. AV OUT/ DIGITAL DC IN #WFKQ .
Others Others Screen Display ∫ In recording Recording in normal picture mode [!] (Initial setting) 1 Recording mode 2 Flash mode (P51) 3 AF area (P40) 4 Focus (P40) 5 Picture size (P81) 6 Quality (P82) 7 Battery indication (P15) 8 Number of recordable pictures (P158) 9 Built-in memory (P19) : Card (P19) (displayed only during recording) 10 Recording state 11 ISO sensitivity (P84) 12 Shutter speed (P40) 13 Aperture value (P40) 14 Optical image stabilizer (P93)/ : Jitter alert (P41) - 136 -
Others ∫ In recording (after settings) 15 AF Tracking (P89) : Macro mode (P56) 16 White balance (P85) 17 ISO sensitivity (P84) maximum ISO sensitivity level (P83) 18 Colour mode (P92) 19 Picture mode (P74) 20 Available recording time (P73): R8m30s 21 Spot AF area (P87) 22 Name¢1 (P65) 23 Histogram (P50) 24 Travel date (P76) 25 Elapsed recording time (P73) AF TRACKING : AF tracking operation (P37, 89) : Intelligent ISO (P83) 26 Current date and time/“: Travel destination setting¢2 (P79) W T 1X : Zoom/Extra
Others ∫ In playback 1 Playback mode (P44) 2 Protected picture (P121) 3 Favourites (P118) : Zoom mark (P97) 4 Stamped with text indication (P111) 5 Picture size (P81) Motion picture icon (P105) 6 Quality (P82) 7 Battery indication (P15) 8 Folder/File number (P126) Built-in memory (P19) Elapsed playback time (P105): 8m30s 9 Picture number/Total pictures 10 Motion picture recording time (P105): 8m30s 11 Histogram (P50) 12 Exposure compensation (P58) 13 Recording information (P49) 14 Favourites settings (P118
Others Cautions for Use Optimal use of the camera Take care not to drop or knock the unit or put a lot of pressure on it. • Take care not to knock or drop the bag/case that you inserted the camera in as the shock may cause damage to the camera, lens or LCD monitor. • Do not attach any other items to the wrist strap that’s included with your camera. While being stored, that item can rest against the LCD monitor and damage it.
Others Cleaning Before cleaning the camera, remove the battery or disconnect the power plug from the outlet. Then wipe the camera with a dry soft cloth. • When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth, and then with a dry cloth. • Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the camera, since it may deteriorate the external case or the coating may peel off.
Others Battery The battery is a rechargeable lithium ion battery. Its ability to generate power comes from the chemical reaction that takes place inside it. This reaction is susceptible to the surrounding temperature and humidity. If the temperature is too high or too low, the operating time of the battery will become shorter. Always remove the battery after use. • Store the removed battery in the battery carrying case (supplied).
Others When not using the camera for a long period of time • Store the battery in a cool and dry place with a relatively stable temperature: [Recommended temperature:15 oC to 25 oC, Recommended humidity: 40% to 60%] • Always remove the battery and the card from the camera. • If the battery is left inserted in the camera, it will discharge even if the camera is turned off. If the battery continues to be left in the camera, it will discharge excessively and may become unusable even if charged.
Others Message Display Confirmation messages or error messages will be displayed on the screen in some cases. The major messages are described below as examples. [THIS MEMORY CARD IS LOCKED] > The Write-Protect switch on the SD Memory Card and the SDHC Memory Card are moved to [LOCK]. Move the switch back to unlock it. (P20) [NO VALID PICTURE TO PLAY] > Record a picture or insert a card with a recorded picture and then play it.
Others [NOT ENOUGH SPACE ON BUILT-IN MEMORY]/[NOT ENOUGH MEMORY ON THE CARD] • There is no space left on the built-in memory or the card. – When you copy pictures from the built-in memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full. [SOME PICTURES CANNOT BE COPIED]/[COPY COULD NOT BE COMPLETED] • The following pictures cannot be copied. – When a picture with the same name as the picture to be copied exists in the copy destination.
Others [READ ERROR/WRITE ERROR PLEASE CHECK THE CARD] • It has failed to read or write data. > Remove the card after turning the power [OFF]. Insert the card again, turn the power on, and try to read or write the data again. • The card may be broken. > Insert a different card. [MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE WRITING SPEED OF THE CARD] ] or [ ], we recommend using a high-speed • When you set the picture quality to [ ], [ card with “10MB/s” or greater displayed on the package.
Others Functions that cannot be set or will not work under some conditions Due to the camera’s specifications, it may not be possible to set some of the functions or some functions may not work in some of the conditions under which the camera is used. The table below lists these functions and the corresponding conditions. • For the functions which cannot be set or will not work in the Intelligent auto mode, refer to “Settings in Intelligent auto mode” (P38).
Others [FLASH] (P51) • When auto bracket has been set • When the burst mode is set • ,, /, ï, ô, 5, 4 and 7 in [SCENE MODE] • $ mode [SELFTIMER] (P57) • ô and < in [SCENE MODE] • $ mode [EXPOSURE] (P58) • 5 in [SCENE MODE] [AUTO BRACKET] (P59) • , ô, • $ mode [PICTURE SIZE] (P81) • , 9, ô, • $ mode [QUALITY] (P82) [ASPECT RATIO] (P83) , 5, and in [SCENE MODE] , and in [SCENE MODE] • , 9, ô, • $ mode , and in [SCENE MODE] • 9, ô, and , in [SCENE MODE] [INTELLIGENT ISO] (P83) • [SCEN
Others Playback Zoom (P46) • When playing back motion pictures • Still pictures with audio (when playing back audio) [TITLE EDIT] (P109) • Motion pictures • Protected pictures [TEXT STAMP] (P111) • Pictures recorded without setting the clock or title • Motion pictures • Still pictures with audio • Pictures stamped with [TEXT STAMP] [RESIZE] (P113) • Motion pictures • Still pictures with audio • Pictures stamped with [TEXT STAMP] [TRIMMING] (P114) • Motion pictures • Still pictures with audio • Pic
Others Troubleshooting First, try out the following procedures (P149–157). If the problem is not resolved, it may be improved by selecting [RESET] (P30) on the [SETUP] menu when taking pictures. Battery and power source The camera cannot be operated even when it is turned on. • The battery is not inserted correctly. (P17) • The battery is exhausted. The LCD monitor turns off while the camera is turned on.
Others Recording The picture cannot be recorded. • Is the [REC]/[PLAYBACK] selector switch at the [!] setting? (P33) • Is the mode dial correctly set? • Is there any memory remaining on the built-in memory or the card? > Delete the pictures which are not necessary to increase the available memory. (P47) The recorded picture is whitish. • The picture can become whitish if there is dirt e.g. fingerprints on the lens.
Others The recorded picture looks rough. Noise appears on the picture. • Is the ISO sensitivity high or the shutter speed slow? (ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures indoors etc. noise will appear.) > Decrease the ISO sensitivity. (P84) > Set [COLOR MODE] to [NATURAL]. (P92) > Take pictures in bright places. • Has [HIGH SENS.
Others LCD monitor The LCD monitor turns off although the camera is turned on. • The LCD monitor turns off and the status indicator lights when [AUTO LCD OFF] (P29) is selected for the [ECONOMY] mode. [This does not happen when using the AC adaptor (optional).] If the remaining battery power is low, it may take longer for the flash to be charged, and the time during which the LCD monitor is turned off may become longer. The LCD monitor becomes darker or brighter for a moment.
Others Playback The picture being played back is rotated and displayed in an unexpected direction. • [ROTATE DISP.] (P117) is set to [ON]. • You can rotate pictures with the [ROTATE] function. (P117) The picture is not played back. • Is the [REC]/[PLAYBACK] selector switch set to [(]? (P44) • Is there a picture on the built-in memory or the card? > The pictures on the built-in memory appear when a card is not inserted. The picture data on the card appears when a card is inserted.
Others White round spots like soap bubbles appear on the recorded picture. • If you take a picture with the flash in a dark place or indoors, white round spots may appear on the picture caused by the flash reflecting of particles of dust in the air. This is not a malfunction. A characteristic of this is that the number of round spots and their position differ in every picture. [THUMBNAIL IS DISPLAYED] appears on the screen.
Others TV, PC and printer The picture does not appear on the television. • Is the camera connected to the TV correctly? > Set the TV input to external input mode. • Output from the [COMPONENT OUT] socket is not possible when it is connected to the PC or the printer. > Connect it only to the TV. The display areas on the TV screen and the camera’s LCD monitor are different.
Others Others An unreadable language was selected by mistake. > Press [MENU/SET], select the [SETUP] menu icon [ the desired language. (P32) ] and then select the [~] icon to set A red lamp sometimes turns on when the shutter button is pressed halfway. • In dark places, the AF assist lamp (P94) lights red to make it easier to focus on a subject. The AF assist lamp does not turn on. • Is [AF ASSIST LAMP] on the [REC] mode menu set to [ON]? (P94) • The AF assist lamp does not turn on in bright places.
Others The file numbers are not recorded consecutively. • When you perform an operation after taking a certain action, the pictures may be recorded in folders with different numbers from the ones used prior to the operation. (P126) The file numbers are recorded in ascending order. • If the battery was inserted or removed without first turning the camera’s power off, the folder and file numbers for the pictures taken will not be stored in the memory.
Others Others Number of Recordable Pictures and Available Recording Time • The number of recordable pictures and the available recording time are an approximation. (These vary depending on the recording conditions and the type of card.) • The number of recordable pictures and the available recording time varies depending on the subjects. ∫ Number of recordable pictures Aspect ratio Picture size Quality Built-in Memory (Approx.
Others Aspect ratio Picture size X (2M ): (1600k1200) (0.3M ): (640k480) Quality Built-in Memory (Approx.
Others Aspect ratio Picture size Quality Built-in Memory (Approx. 50 MB) Card 32 MB 64 MB 128 MB 256 MB 512 MB 1 GB 2 GB 4 GB 8 GB 16 GB 32 GB Y (9M): (6M ): Quality Built-in Memory (Approx. 50 MB) Card 32 MB 64 MB 128 MB 256 MB 512 MB 1 GB 2 GB 4 GB 8 GB 16 GB 32 GB ): (2.
Others ∫ Available recording time (when recording motion pictures) Picture quality setting Built-in Memory (Approx.
Others Specifications Digital Camera: Information for your safety Power Source: DC 5.1 V Power Consumption: 1.4 W (When recording) 0.6 W (When playing back) Camera effective pixels: 10,100,000 pixels Image sensor: 1/2.33q CCD, total pixel number 10,700,000 pixels, Primary colour filter Lens: Optical 5kzoom, fl4.4 mm to 22 mm (35 mm film camera equivalent: 25 mm to 125 mm)/F2.8 to F5.9 Digital zoom: Max. 4k Extra optical zoom: Max. 8.
Others ISO sensitivity: Shutter speed: White balance: Exposure (AE): Metering mode: LCD monitor: Flash: Microphone: Speaker: Recording media: Picture size Still picture: Motion pictures: Quality: Recording file format Still Picture: Pictures with audio: Motion pictures: AUTO/100/200/400/800/1600 [HIGH SENS.
Others Interface Digital: Analogue video/ audio: “USB 2.0” (High Speed) NTSC/PAL Composite (Switched by menu), Component Audio line output (monaural) Terminal [COMPONENT OUT]: [AV OUT/DIGITAL]: [DC IN]: Dimensions: Dedicated jack (10 pin) Dedicated jack (8 pin) Dedicated jack (2 pin) Approx. 94.7 mm (W)k51.9 mm (H)k22.0 mm (D) (excluding the projecting parts) Mass: Approx. 125 g (excluding card and battery) Approx.
