Operating instructions

ManualsBrandsPanasonic ManualsCamcordersDMCFT1

until

2009/2/28

Before use, please read these instructions completely.

VQT1Z56

Operating Instructions

Digital Camera

Model No. DMC-FT1

Web Site: http://www.panasonic-europe.com

DMC-FT1&TS1EB-VQT1Z56_eng.book 1 ページ２００９年２月２日　月曜日　午前９時４７分

Summary of content (152 pages)

PAGE 1
DMC-FT1&TS1EB-VQT1Z56_eng.book 1 ページ２００９年２月２日　月曜日　午前９時４７分 Operating Instructions Digital Camera Model No. DMC-FT1 Before use, please read these instructions completely. Web Site: http://www.panasonic-europe.
PAGE 2
DMC-FT1&TS1EB-VQT1Z56_eng.book 2 ページ２００９年２月２日　月曜日　午前９時４７分 Before Use Before Use Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read these Operating Instructions carefully and keep them handy for future reference.Please note that the actual controls and components, menu items, etc. of your Digital Camera may look somewhat different from those shown in the illustrations in these Operating Instructions.
PAGE 3
DMC-FT1&TS1EB-VQT1Z56_eng.book 3 ページ２００９年２月２日　月曜日　午前９時４７分 Before Use Caution for AC mains lead For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362.
PAGE 4
DMC-FT1&TS1EB-VQT1Z56_eng.book 4 ページ２００９年２月２日　月曜日　午前９時４７分 Before Use ∫ About the battery charger CAUTION! • DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. • DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.
PAGE 5
DMC-FT1&TS1EB-VQT1Z56_eng.book 5 ページ２００９年２月２日　月曜日　午前９時４７分 Before Use Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
PAGE 6
VQT1Z56~TOC.fm 6 ページ２００９年２月３日　火曜日　午前１０時４分 Contents Before Use Information for Your Safety....................... 2 Quick Guide .............................................. 9 (Important) About the waterproof/ dustproof and anti-shock performance of the camera.............................................. 10 Accessories ............................................ 13 Names of the Components ..................... 14 Preparation Attaching the hand strap......................... 16 Charging the Battery....
PAGE 7
DMC-FT1&TS1EB-VQT1Z56_eng.book 7 ページ２００９年２月２日　月曜日　午前９時４７分 • Changing [REC MODE] and [REC QUALITY] ............................... 72 • [CONTINUOUS AF] .................. 74 • [WIND CUT] .............................. 75 • [LED LIGHT].............................. 75 Taking a picture with Face Recognition function ................................................... 76 • Face Recognition functions .............. 76 • Face settings ....................................
PAGE 8
DMC-FT1&TS1EB-VQT1Z56_eng.book 8 ページ２００９年２月２日　月曜日　午前９時４７分 Sales and Support Information Customer Care Centre • For customers within the UK: 0844 844 3852 • For customers within the Republic of Ireland: 01 289 8333 • Visit our website for product information • E-mail: customer.care@panasonic.co.
PAGE 9
DMC-FT1&TS1EB-VQT1Z56_eng.book 9 ページ２００９年２月２日　月曜日　午前９時４７分 Before Use Before Use Quick Guide This is an overview of how to record and play back pictures with the camera. For each step, be sure to refer to the pages indicated in brackets. Charge the battery. (P17) • The battery is not charged when the camera is shipped. Charge the battery before use. Insert the battery and the card. (P20) • When you do not use the card, you can record or play back pictures on the built-in memory.
PAGE 10
VQT1Z56~Body1_mst.fm 10 ページ２００９年２月２日　月曜日　午後９時４８分 Before Use (Important) About the waterproof/dustproof and anti-shock performance of the camera • Please observe the following precautions, and avoid using this camera in any situation where the camera is subject to high water pressure. This camera’s waterproof/dustproof rating complies with the “IPX8” and “IP5X” ratings.
PAGE 11
DMC-FT1&TS1EB-VQT1Z56_eng.book 11 ページ２００９年２月２日　月曜日　午前９時４７分 Before Use ∫ Confirm that there is no foreign object • Before closing the card/battery door or terminal cover, confirm that there are no foreign objects (hair, lint, sand, dust, fluid, etc.) on the part (B and C) coloured black in the figure. When the camera is used underwater with foreign object trapped under the card/battery door or the terminal cover, water may leak in, causing a malfunction.
PAGE 12
VQT1Z56~Body1_mst.fm 12 ページ２００９年２月３日　火曜日　午前１０時５分 Before Use ∫ Using the camera underwater • Use the camera underwater up to 3 m (10 feet) depth, water temperature from 0 oC to 40 oC, and not longer than 60 minutes continuously. • If there is a water or dirt on the camera, use it after wiping it off with a dry soft cloth and dried at well ventilated area. • Do not open or close the card/battery door or terminal cover. • Do not apply shock to the camera underwater.
PAGE 13
DMC-FT1&TS1EB-VQT1Z56_eng.book 13 ページ２００９年２月２日　月曜日　午前９時４７分 Before Use Accessories Check that all the accessories are included before using the camera. 1 2 3 4 5 6 Battery Pack (Indicated as battery in the text) Charge the battery before use. Battery Charger (Indicated as charger in the text) AC Mains Lead USB Connection Cable AV Cable CD-ROM • Software: 1 2 DE-A60A DMW-BCF10E 3 4 Use it to install the software to your PC.
PAGE 14
DMC-FT1&TS1EB-VQT1Z56_eng.book 14 ページ２００９年２月２日　月曜日　午前９時４７分 Before Use Names of the Components 1 2 3 Flash (P50) Self-timer indicator (P55) AF assist lamp (P93)/LED light (P75) Lens (P4, 131) 4 5 6 7 8 9 10 11 LCD monitor (P48, 128) Status indicator (P20, 30, 34) Playback button (P25) [MENU/SET] button (P23) [DISPLAY] button (P48) [Q.
PAGE 15
DMC-FT1&TS1EB-VQT1Z56_eng.book 15 ページ２００９年２月２日　月曜日　午前９時４７分 Before Use 13 14 15 16 17 Shutter button (P37) Camera ON/OFF button (P23) Zoom lever (P43) Microphone (P70, 93, 112) Speaker (P101) 13 14 15 16 17 18 Hand strap eyelet (P16) 19 [HDMI] socket (P115, 116) 20 [AV/DIGITAL/MULTI] socket (P21, 114, 120, 124) • When using an AC adaptor, ensure that 18 19 20 the Panasonic multi conversion adaptor (DMW-MCA1; optional) and AC adaptor (DMW-AC5E; optional) are used.
PAGE 16
DMC-FT1&TS1EB-VQT1Z56_eng.book 16 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation Preparation Attaching the hand strap Run the hand strap into the hand strap eyelet on the camera.   Insert your hand following the arrow, then adjust the length. Note • Attach the hand strap correctly following the procedure. • The camera will sink in the water, so use it underwater with the strap around your wrist.
PAGE 17
DMC-FT1&TS1EB-VQT1Z56_eng.book 17 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation Preparation Charging the Battery ∫ About batteries that you can use with this unit The battery that can be used with this unit is DMW-BCF10E. It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards.
PAGE 18
DMC-FT1&TS1EB-VQT1Z56_eng.book 18 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation ∫ When the [CHARGE] indicator flashes • The battery temperature is excessively high or low. The charging time will be longer than normal. Also, charging may not be completed. • The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth. Note • Disconnect the charger from the power outlet after the charging is completed. • The battery becomes warm after using it and during and after charging.
PAGE 19
DMC-FT1&TS1EB-VQT1Z56_eng.book 19 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation Playback time Approx. 300 min The number of recordable pictures and playback time will vary depending on the operating conditions and storing condition of the battery. ∫ Charging Charging time Approx. 130 min maximum Charging time and number of recordable pictures with the optional battery pack (DMW-BCF10E) are the same as above.
PAGE 20
DMC-FT1&TS1EB-VQT1Z56_eng.book 20 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation Inserting and Removing the Card (optional)/the Battery • Check that this unit is turned off. • Confirm that there is no foreign object. (P11) • We recommend using a Panasonic card. Slide the release lever in the direction of the arrow and open the card/battery door. • Always use genuine Panasonic batteries (DMW-BCF10E). • If you use other batteries, we cannot guarantee the quality of this product.
PAGE 21
VQT1Z56~Body1_mst.fm 21 ページ２００９年２月２日　月曜日　午前１１時４７分 Preparation ∫ About the card/battery door. If you turn on the power with the card/battery door open, a warning sound will go off in order to avoid immersion and the message shown below will appear on the LCD monitor. (P136) The camera cannot be operated when the card/battery door is open. (Only the ON/OFF button can be operated) Close it securely so no foreign object is clamped. • Messages are not displayed when the terminal cover is opened.
PAGE 22
DMC-FT1&TS1EB-VQT1Z56_eng.book 22 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation About the Built-in Memory/the Card The following operations can be performed using this unit. • When a card has not been inserted: Pictures can be recorded in the built-in memory and played back. • When a card has been inserted: Pictures can be recorded on the card and played back. • Clipboard pictures (P94) are stored on the built-in memory even if a card is inserted.
PAGE 23
DMC-FT1&TS1EB-VQT1Z56_eng.book 23 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation Note • Do not turn this unit off, remove its battery or card, or disconnect the AC adaptor (DMW-AC5E; optional) when the access indication is lit [when pictures are being written, read or deleted, or the built-in memory or the card is being formatted (P33)]. Furthermore, do not subject the camera to vibration, impact or static electricity. The card or the data on the card may be damaged, and this unit may no longer operate normally.
PAGE 24
DMC-FT1&TS1EB-VQT1Z56_eng.book 24 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation Press [MENU/SET] to set. • After completing the clock settings, turn the camera off. Then turn the camera back on, switch to recording mode, and check that the display reflects the settings that were performed. • When [MENU/SET] has been pressed to complete the settings without the clock having been set, set the clock correctly by following the “Changing the clock setting” procedure below.
PAGE 25
DMC-FT1&TS1EB-VQT1Z56_eng.book 25 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation Setting the Menu The camera comes with menus that allow you to set the settings for taking pictures and playing them back just as you like and menus that enable you to have more fun with the camera and use it more easily. In particular, the [SETUP] menu contains some important settings relating to the camera’s clock and power. Check the settings of this menu before proceeding to use the camera.
PAGE 26
DMC-FT1&TS1EB-VQT1Z56_eng.book 26 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation Setting menu items This section describes how to select the normal picture mode settings, and the same setting can be used for the [PLAYBACK] menu and [SETUP] menu as well. Example: Setting [AF MODE] from [Ø] to [š] in the normal picture mode Press and hold down the ON/OFF button. ON/OFF A [(] button B [MENU/SET] button C Mode dial Set the mode dial to [·]. • To set the playback menu, proceed to step 3 by pressing the [(].
PAGE 27
DMC-FT1&TS1EB-VQT1Z56_eng.book 27 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation Press 3/4 to select [AF MODE]. • Select the item at the very bottom, and press 4 to move to the second screen. Press 1. • Depending on the item, its setting may not appear or it may be displayed in a different way. Press 3/4 to select [š]. Press [MENU/SET] to set. MENU /SET Press [MENU/SET] to close the menu. Using the quick menu By using the quick menu, some of the menu settings can be easily found.
PAGE 28
DMC-FT1&TS1EB-VQT1Z56_eng.book 28 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation Perform these settings if you need to. About the Setup Menu [CLOCK SET], [ECONOMY] and [AUTO REVIEW] are important items. Check their settings before using them. • In the Intelligent auto mode, only [CLOCK SET], [WORLD TIME], [BEEP] and [LANGUAGE] can be set. For details on how to select the [SETUP] menu settings, refer to P26. U [CLOCK SET] Setting Date/Time. • Refer to P23 for details.
PAGE 29
VQT1Z56~Body1_mst.fm 29 ページ２００９年２月３日　火曜日　午前１０時４９分 Preparation These menu settings make it easier to see the LCD monitor when you are in bright places. LCD [LCD MODE] [OFF] „ [AUTO POWER LCD]: The brightness is adjusted automatically depending on how bright it is around the camera. … [POWER LCD]: The LCD monitor becomes brighter and easier to see even when taking pictures outdoors.
PAGE 30
DMC-FT1&TS1EB-VQT1Z56_eng.book 30 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation You can conserve the battery life by setting these menus. Also, it will turn off the LCD monitor automatically when not in use to prevent discharge of the battery. q [ECONOMY] [AUTO POWER OFF]: The camera is automatically turned off if the camera has not been used for the time selected on the setting. [OFF]/[2MIN.]/[5MIN.]/[10MIN.
PAGE 31
DMC-FT1&TS1EB-VQT1Z56_eng.book 31 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation v [NO.RESET] Reset the file number of the next recording to 0001. • The folder number is updated and the file number starts from 0001. (P123) • A folder number between 100 and 999 can be assigned. When the folder number reaches 999, the number cannot be reset. We recommend formatting the card (P33) after saving the data on a PC or elsewhere.
PAGE 32
DMC-FT1&TS1EB-VQT1Z56_eng.book 32 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation Set the format for the HDMI output when playing back on the HDMI compatible high definition TV connected with this unit using the HDMI mini cable (optional). [HDMI MODE] [AUTO]: The output resolution is automatically set based on the information from the connected TV. [1080i]: The interlace method with 1080 available scan lines is used for output. [720p]: The progressive method with 720 available scan lines is used for output.
PAGE 33
DMC-FT1&TS1EB-VQT1Z56_eng.book 33 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation It is possible to check which version of firmware is on the camera. [VERSION DISP.] [FORMAT] The built-in memory or card is formatted. Formatting irretrievably deletes all the data so check the data carefully before formatting. • Use a battery with sufficient battery power or the AC adaptor (DMW-AC5E; optional) and multi conversion adaptor (DMW-MCA1; optional) when formatting. Do not turn the camera off during formatting.
PAGE 34
DMC-FT1&TS1EB-VQT1Z56_eng.book 34 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation Mode switching Selecting the [REC] mode, and record still picture or motion picture Press and hold down the ON/OFF button. A Motion picture button B Mode dial C Shutter button • The status indicator D lights when the ON/OFF button is pressed. (It will turn off in approximately 1 second) Switching the mode by rotating the mode dial. Align a desired mode with part E. • Rotate the mode dial slowly and surely to adjust to each mode.
PAGE 35
DMC-FT1&TS1EB-VQT1Z56_eng.book 35 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation ∫ List of [REC] modes ¦ Intelligent auto mode (P37) The subjects are recorded using settings automatically selected by the camera. ! Normal picture mode (P41) The subjects are recorded using your own settings. Sports mode (P58) Use this mode to take pictures of sporting events, etc. ¢ It will be a normal motion picture recording during the motion picture recording.
PAGE 36
DMC-FT1&TS1EB-VQT1Z56_eng.book 36 ページ２００９年２月２日　月曜日　午前９時４７分 Preparation Take the still picture after setting the mode dial Press the shutter button halfway to focus. Press the shutter button fully (push it in further), and take the picture. Take the motion picture after setting the mode dial Press the motion picture button to start the recording. Press the motion picture button again to stop the recording. ∫ For more details, refer to “Recording Motion Picture” (P69).
PAGE 37
DMC-FT1&TS1EB-VQT1Z56_eng.book 37 ページ２００９年２月２日　月曜日　午前９時４７分 Basic [REC] mode: ñ Basic Taking pictures using the automatic function (ñ: Intelligent Auto Mode) The camera will set the most appropriate settings to match the subject and the recording conditions so we recommend this mode for beginners or those who want to leave the settings to the camera and take pictures easily. • The following functions are activated automatically.
PAGE 38
DMC-FT1&TS1EB-VQT1Z56_eng.book 38 ページ２００９年２月２日　月曜日　午前９時４７分 Basic Scene detection When the camera identifies the optimum scene, the icon of the scene concerned is displayed in blue for 2 seconds, after which its colour changes to the usual red. ¦ > [i-PORTRAIT] [i-SCENERY] [i-MACRO] [i-NIGHT PORTRAIT] • Only when [‡] is selected [i-NIGHT SCENERY] • Only when [Œ] is selected [i-BABY]¢ • [¦] is set if none of the scenes are applicable, and the standard settings are set.
PAGE 39
VQT1Z56~Body1_mst.fm 39 ページ２００９年２月３日　火曜日　午前１０時６分 Basic Face Recognition Face of the person that is taken often can be registered along with information such as name and birthday. When a picture is taken with [FACE RECOG.] turned [ON], it will search for the face similar to the registered face, setting the focus and exposure preferentially.
PAGE 40
DMC-FT1&TS1EB-VQT1Z56_eng.book 40 ページ２００９年２月２日　月曜日　午前９時４７分 Basic Settings in Intelligent auto mode • Only the following functions can be set in this mode. [REC] mode menu – [PICTURE SIZE]¢1 (P83)/[BURST] (P90)/[COLOR MODE]¢1 (P91)/[FACE RECOG.] (P76) ¢1 The settings which can be selected are different from when other [REC] modes are used.
PAGE 41
VQT1Z56~Body1_mst.fm 41 ページ２００９年２月２日　月曜日　午後７時２８分 Basic [REC] mode: · Taking pictures with your favourite settings (·: Normal picture mode) The camera automatically sets the shutter speed and the aperture value according to the brightness of the subject. You can take pictures with greater freedom by changing various settings in [REC] menu. Set the mode dial to [·]. A Mode dial • To change the setting while taking pictures, refer to “Using the [REC] Mode Menu” (P83).
PAGE 42
DMC-FT1&TS1EB-VQT1Z56_eng.book 42 ページ２００９年２月２日　月曜日　午前９時４７分 Basic A B C D E F G ¢ Focus indication AF area (normal) AF area (when using the digital zoom or when it is dark) Focus range Aperture value¢ Shutter speed¢ ISO sensitivity If correct exposure cannot be achieved, it will be displayed in red. (However, it will not be displayed in red when the flash is used.
PAGE 43
DMC-FT1&TS1EB-VQT1Z56_eng.book 43 ページ２００９年２月２日　月曜日　午前９時４７分 Basic [REC] mode: ñ· ¿¨ Taking Pictures with the Zoom Using the Optical Zoom/Using the Extra Optical Zoom (EZ)/Using the Digital Zoom You can zoom-in to make people and objects appear closer or zoom-out to record landscapes in wide angle. To make subjects appear even closer [maximum of 9.1k], do not set the picture size to the highest setting for each aspect ratio (X/Y/W).
PAGE 44
DMC-FT1&TS1EB-VQT1Z56_eng.book 44 ページ２００９年２月２日　月曜日　午前９時４７分 Basic Note • The digital zoom cannot be set when õ, or ¨ has been selected. • The indicated zoom magnification is an approximation. • “EZ” is an abbreviation of “Extra optical Zoom”. • The optical zoom is set to Wide (1k) when the camera is turned on. • If you use the zoom function after focusing on the subject, focus on the subject again. • When using the digital zoom, [STABILIZER] may not be effective.
PAGE 45
DMC-FT1&TS1EB-VQT1Z56_eng.book 45 ページ２００９年２月２日　月曜日　午前９時４７分 Basic Displaying Multiple Screens (Multi Playback) Slide the zoom lever towards [L] (W). A 1 screen>12 screens>30 screens>Calendar screen display (P102) A Number of the selected picture and the total number of recorded pictures • Slide the zoom lever towards [Z] (T) to return to the previous screen. • Pictures are not rotated for display. ∫ To return to normal playback 1 Press 3/4/2/1 to select a picture.
PAGE 46
DMC-FT1&TS1EB-VQT1Z56_eng.book 46 ページ２００９年２月２日　月曜日　午前９時４７分 Basic Switching the [PLAYBACK] mode 1 2 3 Press [MENU/SET] during playback. Press 1. Press 3/4 to select the item and then press [MENU/SET]. [NORMAL PLAY] (P44) All the pictures are played back. MENU /SET [SLIDE SHOW] (P97) The pictures are played back in sequence. [MODE PLAY] (P99) Playback in [PICTURE], [AVCHD Lite]¢1, or [MOTION JPEG] can be selected. ¢1 This is the specification to record and playback high definition images.
PAGE 47
DMC-FT1&TS1EB-VQT1Z56_eng.book 47 ページ２００９年２月２日　月曜日　午前９時４７分 Basic To delete multiple pictures (up to 50) or all the pictures Press [‚]. Press 3/4 to select [DELETE MULTI] or [DELETE ALL] and then press [MENU/SET]. • [DELETE ALL] > step 5. Press 3/4/2/1 to select the picture, and then press [DISPLAY] to set. (Repeat this step.) •[ ] appears on the selected pictures. If [DISPLAY] is pressed again, the setting is cancelled. DISPLAY Press [MENU/SET].
PAGE 48
DMC-FT1&TS1EB-VQT1Z56_eng.book 48 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) Advanced (Recording pictures) About the LCD Monitor Press [DISPLAY] to change. A LCD monitor B [DISPLAY] button • When the menu screen appears, the [DISPLAY] button is not activated. During playback zoom (P45), while playing back motion pictures (P101) and during a slide show (P97), you can only select “Normal display G” or “No display I”.
PAGE 49
DMC-FT1&TS1EB-VQT1Z56_eng.book 49 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) ∫ Recording guide line When you align the subject on the horizontal and vertical guide lines or the cross point of these lines, you can take pictures with well-designed composition by viewing the size, the slope and the balance of the subject. A [ ]: This is used when dividing the entire screen into 3k3 for taking pictures with a well-balanced composition.
PAGE 50
DMC-FT1&TS1EB-VQT1Z56_eng.book 50 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) [REC] mode: ñ· ¿¨ Taking Pictures using the Built-in Flash A Photo flash Do not cover it with your fingers or other objects. Switching to the appropriate flash setting Set the flash to match the recording. Press 1 [‰]. Press 3/4 to select a mode. • You can also press 1 [‰] to select. • For information about flash settings that can be selected, refer to “Available flash settings by recording mode”.
PAGE 51
VQT1Z56~Body1_mst.fm 51 ページ２００９年２月３日　火曜日　午前１０時７分 Advanced (Recording pictures) ¢ The flash is activated twice. The subject should not move until the second flash is activated. Interval until the second flash depends on the brightness of the subject. ∫ About the digital red-eye correction When the flash is used with the Red-eye reduction ([ ], [ automatically detect and correct the red-eye in the image data.
PAGE 52
DMC-FT1&TS1EB-VQT1Z56_eng.book 52 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) ∫ The available flash range to take pictures • The available flash range is an approximation. ISO sensitivity AUTO ISO80 Available flash range Wide Tele 30 cm (0.99 feet) to 5.1 m (16.7 feet) 30 cm (0.99 feet) to 1.4 m (4.59 feet) 30 cm (0.99 feet) to 2.8 m (9.18 feet) 30 cm (0.99 feet) to 80 cm (2.62 feet) 30 cm (0.99 feet) to 90 cm ISO100 30 cm (0.99 feet) to 1.6 m (5.24 feet) ISO200 40 cm (1.
PAGE 53
DMC-FT1&TS1EB-VQT1Z56_eng.book 53 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) Note • If you bring the flash too close to an object, the object may be distorted or discoloured by the heat or lighting from the flash. • When you take a picture beyond the available flash range, the exposure may not be adjusted properly and the picture may become bright or dark.
PAGE 54
DMC-FT1&TS1EB-VQT1Z56_eng.book 54 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) ∫ Focus range in AF macro mode ¢ The focus range changes in steps. T W 30 cm (0.99 feet) 5 cm (0.17 feet) • Focus range will be 5 cm (0.17 feet) to ¶ during macro zoom mode regardless of the zoom position. Note • We recommend using a tripod and the self-timer. • We recommend setting the flash to [Œ] when you take pictures at close range.
PAGE 55
DMC-FT1&TS1EB-VQT1Z56_eng.book 55 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) [REC] mode: ñ· ¿¨ Taking Pictures with the Self-timer Press 2 [ë]. Press 3/4 to select a mode. • You can also press 2 [ë] to select. Press [MENU/SET]. • You can also press the shutter button halfway to finish. • The menu screen disappears after about 5 seconds. At this time, the selected item is automatically set. Press the shutter button halfway to focus and then press it fully to take the picture.
PAGE 56
DMC-FT1&TS1EB-VQT1Z56_eng.book 56 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) [REC] mode: · ¿¨ Compensating the Exposure Use this function when you cannot achieve appropriate exposure due to the difference in brightness between the subject and the background. Look at the following examples. Underexposed Properly exposed Compensate the exposure towards positive. Overexposed Compensate the exposure towards negative. Press 3 [È] until [EXPOSURE] appears, compensate the exposure with 2/1.
PAGE 57
DMC-FT1&TS1EB-VQT1Z56_eng.book 57 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) [REC] mode: · ¿ Taking Pictures using Auto Bracket In this mode, 3 pictures are automatically recorded in the selected exposure compensation range each time the shutter button is pressed. You can select the picture with the desired exposure from the 3 pictures with different exposures.
PAGE 58
DMC-FT1&TS1EB-VQT1Z56_eng.book 58 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) [REC] mode: Take the outdoors scene expressively By setting the mode dial to [ ], [ ], or [ ], pictures can be taken more effectively matching the conditions such as sports, snow, beach & surf. Note • The mode flash setting is reset to the initial setting when the mode is changed. • Tone of the colour of the image may change when picture is taken with unmatched usage.
PAGE 59
DMC-FT1&TS1EB-VQT1Z56_eng.book 59 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) [REC] mode: ¿ Taking pictures that match the scene being recorded (¿: Scene mode) When you select a scene mode to match the subject and recording situation, the camera sets the optimal exposure and hue to obtain the desired picture. Set the mode dial to [¿]. Press 3/4/2/1 to select the scene mode. • You can switch menu screens from any menu item by sliding the zoom lever. Press [MENU/SET] to set.
PAGE 60
DMC-FT1&TS1EB-VQT1Z56_eng.book 60 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) * [PORTRAIT] When taking pictures of people outdoors during the daytime, this mode allows you to improve the appearance of the persons concerned and make their skin tones look healthier. ∫ Technique for Portrait mode To make this mode more effective: 1 Slide the zoom lever as far as possible to Tele. 2 Move close to the subject to make this mode more effective. Note • The initial setting for [AF MODE] is [š].
PAGE 61
DMC-FT1&TS1EB-VQT1Z56_eng.book 61 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) 0 [SELF PORTRAIT] Select this to take pictures of yourself. ∫ Technique for Self portrait mode • Press the shutter button halfway to focus. The self-timer indicator lights up when you are brought into focus. Making sure you hold the camera still, press the shutter button fully to take the picture. • The subject is not focused when the self-timer indicator is blinking.
PAGE 62
DMC-FT1&TS1EB-VQT1Z56_eng.book 62 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) 4 Take picture after moving the camera horizontally or vertically so the transparent image overlaps. • When taking the third and later pictures, repeat steps 3 and 4. • You can retake the picture by selecting [RETAKE]. 5 Press 3/4 to select [EXIT] and then press [MENU/SET]. Note • It will be a normal motion picture recording during the motion picture recording. • The flash setting is fixed to [Œ].
PAGE 63
DMC-FT1&TS1EB-VQT1Z56_eng.book 63 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) 1 [FOOD] This mode allows you to take pictures of food with a natural hue without being affected by the ambient light in restaurants etc. Note • The focus range is 5 cm (0.17 feet) (Wide)/30 cm (0.99 feet) (Tele) to ¶. 2 [PARTY] Select this when you want to take pictures at a wedding reception, an indoor party etc. This allows you to take pictures of people and the background with near real-life brightness.
PAGE 64
DMC-FT1&TS1EB-VQT1Z56_eng.book 64 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) ∫ To cancel [AGE] and [NAME] Select the [OFF] setting in step 2 of the “Birthday/Name setting” procedure. Note • It will be set to [PORTRAIT] when recording a motion picture. • The age and name can be printed out using the “PHOTOfunSTUDIO 3.0 HD Edition” bundled software on the CD-ROM (supplied). • If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or name will not be displayed.
PAGE 65
DMC-FT1&TS1EB-VQT1Z56_eng.book 65 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) ô [HI-SPEED BURST] This is a convenient mode for shooting rapid movement or a decisive moment. ∫ Picture size and aspect ratio 1 Press 3/4 to select [SPEED PRIORITY] or [IMAGE PRIORITY] and then press [MENU/SET] to set. 2 Press 3/4 to select the picture size and aspect ratio and then press [MENU/SET] to set. • 3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size. 3 Take pictures.
PAGE 66
DMC-FT1&TS1EB-VQT1Z56_eng.book 66 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) Note • It will be a normal motion picture recording during the motion picture recording. • [QUALITY] is automatically fixed to [›]. • You can take pictures suitable for 4qk6q/10k15 cm printing. • The shutter speed becomes 1/30th of a second to 1/1300th of a second. • The focus range is 5 cm (0.17 feet) (Wide)/30 cm (0.99 feet) (Tele) to ¶.
PAGE 67
DMC-FT1&TS1EB-VQT1Z56_eng.book 67 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) 7 [AERIAL PHOTO] This mode allows you to take pictures through an airplane window. ∫ Technique for Aerial photo mode • We recommend using this technique if it is difficult to focus when taking pictures of clouds etc. Aim the camera at something with high contrast, press the shutter button halfway to fix the focus and then aim the camera at the subject and press the shutter button fully to take the picture.
PAGE 68
DMC-FT1&TS1EB-VQT1Z56_eng.book 68 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) < [UNDERWATER] This is optimal to take pictures underwater 3 m (10 feet) or more using the marine case (DMW-MCFT1; optional). ¢ This camera has a waterproof/dustproof function equivalent to "IP58". It is possible to take pictures in 3.0 m (10 feet) depth for 60 minutes. Fixing the focus underwater (AF Lock) You can fix the focus before taking a picture with AF lock.
PAGE 69
DMC-FT1&TS1EB-VQT1Z56_eng.book 69 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) [REC] mode: ñ· ¿ Advanced (Recording pictures) Recording Motion Picture High definition image complying with AVCHD standard can be recorded (P72).
PAGE 70
VQT1Z56~Body2_mst.fm 70 ページ２００９年２月３日　火曜日　午前１０時９分 Advanced (Recording pictures) Start recording by pressing the motion picture button. A • The available recording time A is displayed on the top right and the elapsed recording time B is displayed on the bottom right of the screen. • Release the motion picture button right after you press it. Audio will not be recorded for few second after it starts recording if it is kept pressed.
PAGE 71
DMC-FT1&TS1EB-VQT1Z56_eng.book 71 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) • The flash setting is fixed to [Œ]. • Refer to P148 for information about the available recording time. • The available recording time displayed on the screen may not decrease regularly. • Depending on the type of the card, the card access indication may appear for a while after recording motion pictures. This is not a malfunction.
PAGE 72
DMC-FT1&TS1EB-VQT1Z56_eng.book 72 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) ∫ Face detection When [ ] is selected, the camera automatically detects a person’s face, and it will adjust the focus and exposure (P88). Note • Following [MOTION PICTURE] mode menu cannot be set because the camera sets automatically. [WHITE BALANCE]/[I.EXPOSURE] • It is only possible to set the [COLOR MODE] to [STANDARD], [B/W], or [SEPIA].
PAGE 73
DMC-FT1&TS1EB-VQT1Z56_eng.book 73 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) Press 3/4 to select the item and then press [MENU/SET]. When [AVCHD Lite] is selected in step 2 Item Quality (bit rate)¢1 Aspect ratio 1280 k 720 pixels 17 Mbps¢2 High quality 1280 k 720 pixels 13 Mbps¢2 16:9 1280 k 720 pixels 9 Mbps¢2 Longer time ¢1 What is bit rate This is the volume of data for definite period of time, and the quality becomes higher when the number gets bigger.
PAGE 74
DMC-FT1&TS1EB-VQT1Z56_eng.book 74 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) Note • It is recommended to use a card with SD Speed Class¢1 with “Class 6” or higher when recording motion pictures. ¢1 The SD Speed Class Rating is the speed standard for successive writes. • When you set the picture quality to [ ], [ ] or [ ], we recommend using a high-speed card with “10MB/s” or greater displayed on the package. • Motion pictures can be recorded continuously for up to 15 minutes.
PAGE 75
DMC-FT1&TS1EB-VQT1Z56_eng.book 75 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) [WIND CUT] This will reduce the noise from wind hitting the built-in microphone. Select [WIND CUT] from motion picture [MOTION PICTURE] menu, and press 1. (P26) Press 4 to select [ON] and then press [MENU/SET]. Press [MENU/SET] to close the menu. • You can also press the shutter button halfway to close the menu. Note • Sound quality will be different than usual when [WIND CUT] is set to [ON].
PAGE 76
VQT1Z56~Body2_mst.fm 76 ページ２００９年２月３日　火曜日　午後５時１５分 Advanced (Recording pictures) [REC] mode: ñ· ¿ Taking a picture with Face Recognition function For details on [REC] mode menu settings, refer to P26. Face Recognition functions Following [FACE RECOG.] functions will work when [FACE RECOG.] in [REC] mode menu is set to [ON]. • It will search for the face similar to the registered face, setting the focus and exposure preferentially.
PAGE 77
DMC-FT1&TS1EB-VQT1Z56_eng.book 77 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) Take the picture adjusting the face with the guide. • The faces of subjects other than people (pets, etc.) cannot be registered. • Take a picture of a face from the front Press 3 to select [YES] and then press [MENU/SET]. Press 3/4 to select the item and then press 1. [NAME]: It is possible to register names. For details on how to enter characters, read the [TITLE EDIT] section on P103.
PAGE 78
VQT1Z56~Body2_mst.fm 78 ページ２００９年２月３日　火曜日　午後５時１６分 Advanced (Recording pictures) ∫ Registering from the automatic registration screen When the [AUTO REGISTRATION] is set to [ON] in step 3 of the “Face settings”, the registration screen will display automatically after taking the picture of a face that has high number of appearance. (Registration screen is displayed after approximately 5 pictures. It is not counted when the burst mode and auto bracket is set.
PAGE 79
DMC-FT1&TS1EB-VQT1Z56_eng.book 79 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) [REC] mode: ñ· ¿ Useful Functions at Travel Destinations Recording which Day of the Vacation You Take the Picture For details on the [SETUP] menu settings, refer to P26. If you set the departure date or the travel destination of the vacation in advance, the number of days that have passed since the departure date (which day of the vacation it is) is recorded when you take the picture.
PAGE 80
DMC-FT1&TS1EB-VQT1Z56_eng.book 80 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) Press 3/4/2/1 to set the return date (year/month/ day), and then press [MENU/SET]. • If you do not want to set the return date, press [MENU/SET] while the date bar is displayed. Press 4 to select [LOCATION] and then press 1. Press 4 to select [SET] and then press [MENU/SET]. Enter the location. • For details on how to enter characters, read the [TITLE EDIT] section on P103.
PAGE 81
DMC-FT1&TS1EB-VQT1Z56_eng.book 81 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) Note • The travel date is calculated using the date in the clock setting and the departure date you set. If you set [WORLD TIME] (P81) to the travel destination, the travel date is calculated using the date in the clock setting and the travel destination setting. • The travel date setting is memorised even if the camera is turned off.
PAGE 82
DMC-FT1&TS1EB-VQT1Z56_eng.book 82 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) Press 3 to select [DESTINATION] and then press [MENU/SET] to set. C Depending on the setting, the time at the travel destination C area or the home area is displayed. Press 2/1 to select the area the travel destination is in and then press [MENU/SET] to set. D E D Current time of the destination area E Time difference • If daylight saving time [ ] is used at the travel destination, press 3.
PAGE 83
DMC-FT1&TS1EB-VQT1Z56_eng.book 83 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) Using the [REC] Mode Menu @ [PICTURE SIZE] For details on [REC] mode menu settings, refer to P26. Set the number of pixels. The higher the numbers of pixels, the finer the detail of the pictures will appear even when they are printed onto large sheets. ¿ Applicable modes: ñ· ∫ When the aspect ratio is [X]. ¢ This item cannot be set in the Intelligent auto mode.
PAGE 84
DMC-FT1&TS1EB-VQT1Z56_eng.book 84 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) A [QUALITY] For details on [REC] mode menu settings, refer to P26. Set the compression rate at which the pictures are to be stored.
PAGE 85
DMC-FT1&TS1EB-VQT1Z56_eng.book 85 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) > [SENSITIVITY] For details on [REC] mode menu settings, refer to P26. This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure enables pictures to be taken even in dark places without the resulting pictures coming out dark.
PAGE 86
DMC-FT1&TS1EB-VQT1Z56_eng.book 86 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) ∫ Setting the white balance manually Set the white balance value. Use to match the condition when taking photographs. 1 2 Select [Ó] and then press [MENU/SET]. Aim the camera at a sheet of white paper etc. so that the frame in the centre is filled by the white object only and then press [MENU/SET].
PAGE 87
DMC-FT1&TS1EB-VQT1Z56_eng.book 87 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) [FACE RECOG.] For details on [REC] mode menu settings, refer to P26. Specify a person's face and use the face recognition functions. Applicable modes: ñ· [OFF]/[ON]/[SET] ¿ Note • Refer to P76 for details. AF [AF MODE] For details on [REC] mode menu settings, refer to P26. This allows the focusing method that suits the positions and number of the subjects to be selected.
PAGE 88
VQT1Z56~Body2_mst.fm 88 ページ２００９年２月３日　火曜日　午前１０時１０分 Advanced (Recording pictures) ∫ About [š] The following AF area frames are displayed when the camera detects the faces. Yellow: When the shutter button is pressed halfway, the frame turns green when the camera is focused. White: Displayed when more than one face is detected. Other faces that are the same distance away as faces within the yellow AF areas are also focused.
PAGE 89
DMC-FT1&TS1EB-VQT1Z56_eng.book 89 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) [PRE AF] For details on [REC] mode menu settings, refer to P26. The camera will adjust focus automatically depending on the settings. Applicable modes: · ¿ [OFF] [ [ ]: Quick AF ¢ ]: Continuous AF [ ] is displayed on the screen. [ ] is displayed on the screen. ¢ In recording motion pictures, only [ ] (Continuous AF) can be selected.
PAGE 90
DMC-FT1&TS1EB-VQT1Z56_eng.book 90 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) ˜ [BURST] For details on [REC] mode menu settings, refer to P26. Pictures are taken continuously while the shutter button is pressed. Select the ones you really like from among the pictures you have taken. Applicable modes: ñ· ¿ [OFF] ˜ ò Burst speed (pictures/ second) — A — max. 3 › — max. 5 Number of recordable pictures approx. 2.3¢ approx. 1.
PAGE 91
DMC-FT1&TS1EB-VQT1Z56_eng.book 91 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) ) [DIGITAL ZOOM] For details on [REC] mode menu settings, refer to P26. This can enlarge subjects even more than the optical zoom or extra optical zoom. Applicable modes: · ¿ [OFF]/[ON] Note • Refer to P43 for details. • If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be set to [AUTO] or [MODE 1]. • The setting is fixed to [ON] in macro zoom mode.
PAGE 92
DMC-FT1&TS1EB-VQT1Z56_eng.book 92 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) [STABILIZER] For details on [REC] mode menu settings, refer to P26. Using one of these modes, jitter during picture taking is detected, and the camera automatically compensates the jitter, enabling jitter-free images to be taken. ¿ Applicable modes: · [OFF] [AUTO]: The optimum jitter compensation is selected depending on the condition. [MODE1]: Jitter is always compensated during [REC] mode.
PAGE 93
DMC-FT1&TS1EB-VQT1Z56_eng.book 93 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) B [AUDIO REC.] For details on [REC] mode menu settings, refer to P26. Audio can be recorded simultaneously with the image. You can record the conversation during the shooting or the situation as a memo. ¿ Applicable modes: · [OFF]: Audio will not be recorded. [ON]: [B] is displayed on the screen. Audio will be recorded as soon as the image is recorded.
PAGE 94
DMC-FT1&TS1EB-VQT1Z56_eng.book 94 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) Mode dial: ¨ Taking and viewing clipboard pictures (¨: Clipboard mode) This setting is useful when taking pictures of timetables, route maps or other information instead of taking notes. Regardless of whether a card is present or not, the data is stored in the dedicated clipboard folder of the built-in memory so it can be differentiated from the regular taken pictures and made available for immediate viewing.
PAGE 95
DMC-FT1&TS1EB-VQT1Z56_eng.book 95 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) Press 3/4 to select the setting and then press [MENU/SET]. Press [MENU/SET] to close the menu. Viewing clipboard pictures Set the mode dial to [¨]. Press [(]. Press 2/1 to move the picture. 2: Play back the previous picture. 1: Play back the next picture. • When the zoom lever is slidden to [L] (W), a screen showing 12 pictures appears. To return to the full-screen display, slide the zoom lever to [Z] (T).
PAGE 96
DMC-FT1&TS1EB-VQT1Z56_eng.book 96 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Recording pictures) Clipboard playback menu When [MENU/SET] is pressed during clipboard playback, the menu screen appears. (The steps taken are the same as for the “Clipboard recording menu” (P94).) Item Description of setting [CANCEL MARK] Used to release the zoom position. 1 Press 2/1 to select a clipboard pictures with zoom mark [ 2 Press [MENU/SET] to cancel. ]. Used to add sound after the clipboard pictures are recorded.
PAGE 97
DMC-FT1&TS1EB-VQT1Z56_eng.book 97 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) [PLAYBACK] mode: ¸ Advanced (Playback) Playing Back Pictures in Sequence (Slide Show) You can play back the pictures you have taken in synchronisation with music, and you can do this in sequence while leaving a fixed interval between each of the pictures. Furthermore, you can play back the pictures grouped together by category or play back only those pictures you have set as favourites as a slide show.
PAGE 98
DMC-FT1&TS1EB-VQT1Z56_eng.book 98 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) Press 3 to select [START] and then press [MENU/SET]. Press 4 to finish the slide show. • Normal playback resumes after the slide show finishes. ∫ Operations performed during slide show The cursor displayed during playback is the same as 3/4/2/1. • The menu screen is restored when [‚] is pressed.
PAGE 99
DMC-FT1&TS1EB-VQT1Z56_eng.book 99 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) [PLAYBACK] mode: ¸ Selecting Pictures and Playing them Back ([CATEGORY PLAY]/[FAVORITE PLAY]) [MODE PLAY] Playback in [PICTURE], [AVCHD Lite], or [MOTION JPEG] can be selected. Perform steps 1 and 2 on page 97. Press 3 4 to select [MODE PLAY] and then press [MENU/SET]. . Press 3/4 to select the item and then press [MENU/SET].
PAGE 100
DMC-FT1&TS1EB-VQT1Z56_eng.book 100 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) [CATEGORY] Recording information e.g. scene modes [CATEGORY] [FACE RECOG.]¢1 * [PORTRAIT], [i-PORTRAIT], [SOFT SKIN], [TRANSFORM], [SELF PORTRAIT], [NIGHT PORTRAIT], [i-NIGHT PORTRAIT], [BABY1]/[BABY2], [i-BABY] , [SCENERY], [i-SCENERY], [SUNSET], [AERIAL PHOTO] . [NIGHT PORTRAIT], [i-NIGHT PORTRAIT], [NIGHT SCENERY], [i-NIGHT SCENERY], [STARRY SKY] Recording information e.g.
PAGE 101
DMC-FT1&TS1EB-VQT1Z56_eng.book 101 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) [PLAYBACK] mode: ¸ Playing Back Motion Pictures/Pictures with Audio • File formats of motion pictures/still pictures with audio that can be played with this unit are QuickTime Motion JPEG or AVCHD Lite. • For the motion picture recorded in [AVCHD Lite], only the motion picture that was recorded on this camera or the one that was edited with the “PHOTOfunSTUDIO 3.
PAGE 102
DMC-FT1&TS1EB-VQT1Z56_eng.book 102 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) [PLAYBACK] mode: ¸ Using the [PLAYBACK] mode menu You can use various functions in playback mode to rotate pictures, set protection for them etc. • With [TEXT STAMP], [RESIZE], [TRIMMING] or [LEVELING], a new edited picture is created. A new picture cannot be created if there is no free space on the built-in memory or the card so we recommend checking that there is free space and then editing the picture.
PAGE 103
DMC-FT1&TS1EB-VQT1Z56_eng.book 103 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) [TITLE EDIT] You can add text (comments) to pictures. After text has been registered, it can be included in prints using [TEXT STAMP] (P104). (Only alphabetic characters and symbols can be entered.) Names set in [BABY1]/[BABY2] and [PET] in scene mode or [LOCATION] in travel date are also recorded as the titles. Select [TITLE EDIT] on the [PLAYBACK] mode menu.
PAGE 104
DMC-FT1&TS1EB-VQT1Z56_eng.book 104 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) ∫ Delete the title [SINGLE] setting 1 In step 4, delete all the texts, select [EXIT], and press [MENU/SET]. 2 Press [‚]. 3 Press [MENU/SET] to close the menu. [MULTI] setting 1 In step 4, delete all the texts, select [EXIT], and press [MENU/SET]. 2 Press [MENU/SET] to close the menu. Note • Text can be scrolled if all of the registered text does not fit on the screen. • The name setting of [FACE RECOG.
PAGE 105
DMC-FT1&TS1EB-VQT1Z56_eng.book 105 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) Press 3/4/2/1 to select [SHOOTING DATE], [AGE], [TRAVEL DATE] or [TITLE] and then press [MENU/SET] to set each item. [SHOOTING DATE] [W/OTIME]: Stamp the year, month and date. [WITHTIME]: Stamp the year, month, day, hour and minutes. [AGE] (P63) If this is set to [ON], [AGE] is stamped on the pictures. [TRAVEL DATE] If this is set to [ON], [TRAVEL DATE] is stamped on the pictures.
PAGE 106
DMC-FT1&TS1EB-VQT1Z56_eng.book 106 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) Q [RESIZE] Reducing the picture size (number of pixels) We recommend resizing to [ ] if you want to attach a picture to an e-mail or use it on a website. (Pictures set to the minimum number of pixels for [ASPECT RATIO] cannot be further reduced in size.) Select [RESIZE] on the [PLAYBACK] mode menu. (P26) Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. Select the picture and size.
PAGE 107
DMC-FT1&TS1EB-VQT1Z56_eng.book 107 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) [TRIMMING] You can enlarge and then clip the important part of the recorded picture. Select [TRIMMING] on the [PLAYBACK] mode menu. (P26) Press 2/1 to select the picture, and then press [MENU/SET]. Use the zoom lever and press 3/4/2/1 to select the parts to be trimmed. Reduction Zoom lever (T): Enlargement Zoom lever (W): Reduction 3/4/2/1: Move Enlargement () Move the position () Press [MENU/SET].
PAGE 108
DMC-FT1&TS1EB-VQT1Z56_eng.book 108 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) [LEVELING] Minute tilting of the image can be adjusted. Select [LEVELING] on the [PLAYBACK] mode menu. (P26) Press 2/1 to select the picture, and then press [MENU/SET]. Press 2/1 to adjust the tilting, and press [MENU/SET]. 1: clockwise 2: counter-clockwise • Up to 2 o can be adjusted. Press 3 to select [YES] and then press [MENU/SET]. Press [‚] to return to the menu screen. • Press [MENU/SET] to close the menu.
PAGE 109
DMC-FT1&TS1EB-VQT1Z56_eng.book 109 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) Note • When you play back pictures on a PC, they cannot be displayed in the rotated direction unless the OS or software is compatible with Exif. Exif is a file format for still pictures which allows recording information etc. to be added. It was established by “JEITA (Japan Electronics and Information Technology Industries Association)”.
PAGE 110
DMC-FT1&TS1EB-VQT1Z56_eng.book 110 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) [PRINT SET] DPOF “Digital Print Order Format” is a system that allows the user to select which pictures to print, how many copies of each picture to print and whether or not to print the recording date on the pictures when using a DPOF compatible photo printer or photo printing store. For details, ask at your photo printing store.
PAGE 111
DMC-FT1&TS1EB-VQT1Z56_eng.book 111 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) Note • The number of prints can be set from 0 to 999. • With a printer supporting PictBridge, the date print settings of the printer may take precedence so check if this is the case. • It may not be possible to use the print settings with other equipment. In this case, cancel all the settings, and reset the settings. • If the file is not based on the DCF standard, the print setting cannot be set.
PAGE 112
DMC-FT1&TS1EB-VQT1Z56_eng.book 112 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) B [AUDIO DUB.] You can add the audio after taking a picture. Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P26) Press 2/1 to select the picture and then press [MENU/SET] to start audio recording. • The message [OVERWRITE AUDIO DATA?] screen appears when audio has already been recorded. Press 3 to select [YES] and then press [MENU/SET] to start audio recording. (The original audio is overwritten.
PAGE 113
DMC-FT1&TS1EB-VQT1Z56_eng.book 113 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) S [COPY] You can copy data of pictures you have shot from the built-in memory onto a card, from a card into the built-in memory or from a card into the dedicated clipboard folder. Select [COPY] on the [PLAYBACK] mode menu. (P26) Press 3/4 to select the copy destination and then press [MENU/SET]. : All the picture data in the built-in memory are copied onto the card at one time. > step 4.
PAGE 114
DMC-FT1&TS1EB-VQT1Z56_eng.book 114 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) [PLAYBACK] mode: ¸ Playing Back Pictures on a TV Screen Playing back pictures using the AV cable (supplied) Preparations: Set the [TV ASPECT]. (P31) Turn this unit and the TV off.    1 Yellow: to the video input socket 2 White: to the audio input socket 3 Red: to the audio input socket A Align the marks, and insert.
PAGE 115
DMC-FT1&TS1EB-VQT1Z56_eng.book 115 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) Playing back pictures on a TV with an SD Memory Card slot Still pictures recorded on an SD Memory Card can be played back on a TV with an SD Memory Card slot. Note • Depending on the TV model, pictures may not be displayed on the full screen. • Motion pictures recorded with [AVCHD Lite] can be played back on Panasonic TVs (VIERA) with the AVCHD logo mark.
PAGE 116
DMC-FT1&TS1EB-VQT1Z56_eng.book 116 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) Connect the HDMI mini cable B (optional) to the HDMI input socket on the TV. Connect the HDMI mini cable to the [HDMI] socket on the camera. Turn the TV on and switch to HDMI input. Turn the camera on and then press [(]. • When [VIERA Link] (P32) is set to [ON] and the camera is connected to a TV supporting VIERA Link, input of the TV will be switched automatically and playback screen will be displayed (P116).
PAGE 117
DMC-FT1&TS1EB-VQT1Z56_eng.book 117 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) Preparations: Set the [VIERA Link] to [ON]. (P32) Connect this unit to a Panasonic TV compatible with VIERA Link with a HDMI mini cable (optional) (P115). Operate with the remote control for the TV. 1 2 3 4 Panasonic TV compatible with VIERA Link [OPTION] button [EXIT] button [OK] button ∫ Usable functions 1) Multi playback Select the image with 3/4/2/1 on the TV remote controller.
PAGE 118
DMC-FT1&TS1EB-VQT1Z56_eng.book 118 ページ２００９年２月２日　月曜日　午前９時４７分 Advanced (Playback) ∫ Other linked operations Turning the power off: If you use the remote control for the TV to turn off the power, the power on this unit also turns off. (When connecting the unit to a PC with a USB cable, the power will not turn off.) Automatic input switching: • If you connect with a HDMI mini cable and then turn on the power on this unit, the input channel on the TV automatically switches to this unit’s screen.
PAGE 119
DMC-FT1&TS1EB-VQT1Z56_eng.book 119 ページ２００９年２月２日　月曜日　午前９時４７分 Connecting to other equipment Connecting to other equipment Saving the recorded still pictures and motion pictures Method to acquire into other equipment is different for the still pictures and motion pictures recorded with this unit depending on their file format (JPEG, AVCHD Lite or MOTION JPEG). Select the following methods depending on the equipment to be used.
PAGE 120
DMC-FT1&TS1EB-VQT1Z56_eng.book 120 ページ２００９年２月２日　月曜日　午前９時４７分 Connecting to other equipment Copying to a PC File formats that can be used: [JPEG]/[AVCHD Lite], [MOTION JPEG] It is possible to acquire still pictures and motion pictures recorded in [AVCHD Lite] or [MOTION JPEG] formats, or create standard quality DVD video which is not high definition from the motion picture that was recorded as [AVCHD Lite], using the software “PHOTOfunSTUDIO 3.0 HD Edition” in the CD-ROM (supplied).
PAGE 121
DMC-FT1&TS1EB-VQT1Z56_eng.book 121 ページ２００９年２月２日　月曜日　午前９時４７分 Connecting to other equipment Acquiring of still pictures and [MOTION JPEG] motion pictures (other than [AVCHD Lite] motion pictures) Preparations: Turn on the camera and the PC. Remove the card before using the pictures in the built-in memory. A USB connection cable (supplied) • Check the directions of the connectors, and plug them straight in or unplug them straight out.
PAGE 122
DMC-FT1&TS1EB-VQT1Z56_eng.book 122 ページ２００９年２月２日　月曜日　午前９時４７分 Connecting to other equipment Double-click on [Removable Disk] in [My Computer]. • When using a Macintosh, the drive is displayed on the desktop. (“LUMIX”, “NO_NAME” or “Untitled” is displayed.) Double-click [DCIM] folder. Using a drag-and-drop operation, move the pictures you want to acquire or the folder storing those pictures to any different folder on the PC.
PAGE 123
DMC-FT1&TS1EB-VQT1Z56_eng.book 123 ページ２００９年２月２日　月曜日　午前９時４７分 Connecting to other equipment ∫ Viewing the contents of the built-in memory or card using the PC (folder composition) Folders and images processed in the PC cannot be played back on the camera. It is recommended to use the “PHOTOfunSTUDIO 3.0 HD Edition” bundled software on the CD-ROM (supplied) when you write the image from PC to a card.
PAGE 124
DMC-FT1&TS1EB-VQT1Z56_eng.book 124 ページ２００９年２月２日　月曜日　午前９時４７分 Connecting to other equipment Printing the Pictures If you connect the camera to a printer supporting PictBridge, you can select the pictures to be printed out and instruct that printing be started on the camera’s LCD monitor. Preparations: Turn on the camera and the printer. Remove the card before printing the pictures in the built-in memory. Perform the print quality and other settings at the printer before printing the pictures.
PAGE 125
DMC-FT1&TS1EB-VQT1Z56_eng.book 125 ページ２００９年２月２日　月曜日　午前９時４７分 Connecting to other equipment Note • Do not use any other USB connection cables except the supplied one. Use of cables other than the supplied USB connection cable may cause malfunction. • Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC5E; optional). • Before inserting or removing a card, turn the camera off, and disconnect the USB connection cable.
PAGE 126
DMC-FT1&TS1EB-VQT1Z56_eng.book 126 ページ２００９年２月２日　月曜日　午前９時４７分 Connecting to other equipment Item Description of settings [MULTI SELECT] Multiple pictures are printed at one time. • Press 3/4/2/1 to select the pictures, and then When [DISPLAY] is pressed, [é] appears on the pictures to be printed. (When [DISPLAY] is pressed again, the setting is cancelled.) • After the pictures have been selected, press [MENU/SET]. [SELECT ALL] Prints all the stored pictures.
PAGE 127
DMC-FT1&TS1EB-VQT1Z56_eng.book 127 ページ２００９年２月２日　月曜日　午前９時４７分 Connecting to other equipment [PAPER SIZE] Item Description of settings Settings on the printer are prioritised. { [L/3.5qk5q] 89 mmk127 mm [2L/5qk7q] 127 mmk178 mm [POSTCARD] 100 mmk148 mm [16:9] 101.6 mmk180.6 mm [A4] 210 mmk297 mm [A3] 297 mmk420 mm [10k15cm] 100 mmk150 mm [4qk6q] 101.6 mmk152.4 mm [8qk10q] 203.2 mmk254 mm [LETTER] 216 mmk279.4 mm [CARD SIZE] 54 mmk85.
PAGE 128
DMC-FT1&TS1EB-VQT1Z56_eng.
PAGE 129
DMC-FT1&TS1EB-VQT1Z56_eng.book 129 ページ２００９年２月２日　月曜日　午前９時４７分 Others 32 Intelligent Exposure (P89) 33 Burst (P90)/ : Auto bracket (P57)/B: Audio recording (P93) : AF Lock (P68) 34 AF assist lamp (P93)/ 35 Number of days that have passed since the travel date (P79) 36 Self-timer mode (P55) 37 WIND CUT (P75) 38 LED light (P75) ¢1 This is displayed for about 5 seconds when this unit is turned on in [BABY1]/[BABY2] or [PET] in scene mode.
PAGE 130
VQT1Z56~Body2_mst.fm 130 ページ２００９年２月３日　火曜日　午前１０時１０分 Others Cautions for Use (Important) About the waterproof/dustproof and anti-shock performance of the camera • This camera has a waterproof/dustproof function equivalent to "IP58". It is possible to take pictures in 3.0 m (10 feet) depth for 60 minutes.¢1 ¢1 This means that the camera can be used underwater for specified time in specified pressure in accordance with the handling method established by Panasonic.
PAGE 131
VQT1Z56~Body2_mst.fm 131 ページ２００９年２月３日　火曜日　午前１０時１１分 Others Do not use the camera near radio transmitters or high-voltage lines. • If you record near radio transmitters or high-voltage lines, the recorded pictures and sound may be adversely affected. Always use the supplied cords and cables. If you use optional accessories, use the cords and the cables supplied with them. Do not extend the cords or the cables. Do not spray the camera with insecticides or volatile chemicals.
PAGE 132
DMC-FT1&TS1EB-VQT1Z56_eng.book 132 ページ２００９年２月２日　月曜日　午前９時４７分 Others Battery The battery is a rechargeable lithium ion battery. Its ability to generate power comes from the chemical reaction that takes place inside it. This reaction is susceptible to the surrounding temperature and humidity. If the temperature is too high or too low, the operating time of the battery will become shorter. Always remove the battery after use. • Store the removed battery in the battery case (supplied).
PAGE 133
DMC-FT1&TS1EB-VQT1Z56_eng.book 133 ページ２００９年２月２日　月曜日　午前９時４７分 Others About the personal information If a name or birthday is set for [BABY1]/[BABY2]/face recognition function, this personal information is kept in the camera and included in the recorded image. Disclaimer • Information including personal information may be altered or vanish due to erroneous operation, effect of static electricity, accident, malfunction, repair, or other handlings.
PAGE 134
DMC-FT1&TS1EB-VQT1Z56_eng.book 134 ページ２００９年２月２日　月曜日　午前９時４７分 Others Message Display Confirmation messages or error messages will be displayed on the screen in some cases. The major messages are described below as examples. [THIS MEMORY CARD IS LOCKED] > The Write-Protect switch on the SD Memory Card and the SDHC Memory Card are moved to [LOCK]. Move the switch back to unlock it. (P22) [NO VALID PICTURE TO PLAY] > Record a picture or insert a card with a recorded picture and then play it.
PAGE 135
DMC-FT1&TS1EB-VQT1Z56_eng.book 135 ページ２００９年２月２日　月曜日　午前９時４７分 Others [MEMORY CARD ERROR FORMAT THIS CARD?] • This card has a format which is not recognised by the camera. > Format the card again with the camera after saving necessary data on a PC etc. (P33) [PLEASE TURN CAMERA OFF AND THEN ON AGAIN]/[SYSTEM ERROR] • This message will be displayed when the lens did not operate properly. > Turn the camera off and on. If the message persists, contact the dealer or your nearest Service Centre.
PAGE 136
DMC-FT1&TS1EB-VQT1Z56_eng.book 136 ページ２００９年２月２日　月曜日　午前９時４７分 Others [PRINTER BUSY]/[PLEASE CHECK THE PRINTER] • The printer cannot print. > Check the printer. [NO BATTERY POWER REMAINS] • The remaining battery power is low. > Charge the battery. [THIS BATTERY CANNOT BE USED] • The battery cannot be recognised by the camera. > Use a genuine Panasonic battery. If this message is displayed even when a genuine Panasonic battery is used, contact the dealer or your nearest Service Centre.
PAGE 137
DMC-FT1&TS1EB-VQT1Z56_eng.book 137 ページ２００９年２月２日　月曜日　午前９時４７分 Others Troubleshooting First, try out the following procedures (P137–144). If the problem is not resolved, it may be improved by selecting [RESET] (P31) on the [SETUP] menu when taking pictures. Battery and power source The camera cannot be operated even when it is turned on. • The battery is not inserted correctly. (P20) • The battery is exhausted. • Keep the ON/OFF button pressed until the status indicator is turned on.
PAGE 138
DMC-FT1&TS1EB-VQT1Z56_eng.book 138 ページ２００９年２月２日　月曜日　午前９時４７分 Others The area around where the pictures were taken becomes dark. • Was this picture taken with the flash at the close range when the zoom is near [W] (1k)? > Zoom in a little, and then take the pictures. (P43) • Is this a picture taken in [PIN HOLE] in scene mode? The recorded picture is too bright or dark. > Check that the exposure is correctly compensated. (P56) • Setting the [MIN.
PAGE 139
DMC-FT1&TS1EB-VQT1Z56_eng.book 139 ページ２００９年２月２日　月曜日　午前９時４７分 Others The brightness or the hue of the recorded picture is different from the actual scene. • If recording under fluorescent light, the brightness or the hue may change slightly when the shutter speed becomes fast. This occurs due to the characteristics of fluorescent light. It is not a malfunction. A reddish vertical line (smear) appears on the LCD monitor during picture-taking.
PAGE 140
DMC-FT1&TS1EB-VQT1Z56_eng.book 140 ページ２００９年２月２日　月曜日　午前９時４７分 Others LCD monitor The LCD monitor turns off although the camera is turned on. • The LCD monitor turns off and the status indicator lights when [AUTO LCD OFF] (P30) is selected for the [ECONOMY] mode. [This does not happen when using the AC adaptor (DMW-AC5E; optional).] If the remaining battery power is low, it may take longer for the flash to be charged, and the time during which the LCD monitor is turned off may become longer.
PAGE 141
DMC-FT1&TS1EB-VQT1Z56_eng.book 141 ページ２００９年２月２日　月曜日　午前９時４７分 Others Playback The picture being played back is rotated and displayed in an unexpected direction. • [ROTATE DISP.] (P108) is set to [ON]. The picture is not played back. • Did you press [(]? • Is there a picture on the built-in memory or the card? > The pictures on the built-in memory appear when a card is not inserted. The picture data on the card appears when a card is inserted.
PAGE 142
DMC-FT1&TS1EB-VQT1Z56_eng.book 142 ページ２００９年２月２日　月曜日　午前９時４７分 Others [THUMBNAIL IS DISPLAYED] appears on the screen. • Is it a picture that has been recorded with other equipment? In such cases, these pictures may be displayed with a deteriorated picture quality. A clicking sound is recorded in the motion pictures. • This unit automatically adjusts the aperture during motion picture recording. At such times, a clicking sound is heard, and this sound may be recorded on the motion pictures.
PAGE 143
DMC-FT1&TS1EB-VQT1Z56_eng.book 143 ページ２００９年２月２日　月曜日　午前９時４７分 Others The card is not recognised by the PC. (The built-in memory is recognised.) > Disconnect the USB connection cable. Connect it again while the card is inserted in the camera. • When the mode dial is set to [¨], contents of the built-in memory will be displayed. > Set the mode dial to anything except [¨]. The picture cannot be printed when the camera is connected to a printer.
PAGE 144
DMC-FT1&TS1EB-VQT1Z56_eng.book 144 ページ２００９年２月２日　月曜日　午前９時４７分 Others The clock is reset. • If you do not use the camera for a long time, the clock may be reset. > When the message [PLEASE SET THE CLOCK] appears, set the clock again. When you take a picture before setting the clock, [0:00 0. 0. 0] is recorded. (P24) When pictures are taken using the zoom, they are slightly distorted and the areas around the subject contain colours which are not actually present.
PAGE 145
DMC-FT1&TS1EB-VQT1Z56_eng.book 145 ページ２００９年２月２日　月曜日　午前９時４７分 Others Others Number of Recordable Pictures and Available Recording Time • The number of recordable pictures and the available recording time are an approximation. (These vary depending on the recording conditions and the type of card.) • The number of recordable pictures and the available recording time varies depending on the subjects. ∫ Number of recordable pictures Aspect ratio X Picture size Quality Built-in Memory (Approx.
PAGE 146
DMC-FT1&TS1EB-VQT1Z56_eng.book 146 ページ２００９年２月２日　月曜日　午前９時４７分 Others Aspect ratio X ( Picture size ( ) Quality A › A › Built-in Memory (Approx.
PAGE 147
DMC-FT1&TS1EB-VQT1Z56_eng.book 147 ページ２００９年２月２日　月曜日　午前９時４７分 Others Aspect ratio Y Picture size Quality Built-in Memory (Approx.
PAGE 148
VQT1Z56~Body3_mst.fm 148 ページ２００９年２月３日　火曜日　午前１０時１２分 Others ∫ Available recording time (when recording motion pictures) File format [AVCHD Lite] [MOTION JPEG] Recording quality setting Built-in Memory (Approx. 40 MB) 32 MB 4s 64 MB 128 MB Cannot be guaranteed in operation. 256 MB Card 1 min 27 s Cannot be used.
PAGE 149
VQT1Z56~Body3_mst.fm 149 ページ２００９年２月２日　月曜日　午前１０時９分 Others Specifications Digital Camera: Information for your safety Power Source: DC 5.1 V Power Consumption: 1.35 W (When recording) 0.7 W (When playing back) Camera effective pixels: 12,100,000 pixels Image sensor: 1/2.33q CCD, total pixel number 12,700,000 pixels, Primary colour filter Lens: Optical 4.6kzoom, fl4.9 mm to 22.8 mm (35 mm film camera equivalent: 28 mm to 128 mm)/F3.3 to F5.9 Digital zoom: Max. 4k Extra optical zoom: Max. 9.
PAGE 150
VQT1Z56~Body3_mst.fm 150 ページ２００９年２月２日　月曜日　午前１０時９分 Others White balance: Exposure (AE): Metering Mode: LCD monitor: Flash: Microphone: Speaker: Recording media: Picture size Still picture: Motion pictures: Quality: Recording file format Still Picture: Pictures with audio: Auto white balance/Daylight/Cloudy/Shade/Incandescent lights/ White set Programme AE Exposure compensation (1/3 EV Step, j2 EV to i2 EV) Multiple 2.7q TFT LCD (Approx.
PAGE 151
VQT1Z56~Body3_mst.fm 151 ページ２００９年２月２日　月曜日　午前１０時９分 Others Interface Digital: Analogue video/ audio: “USB 2.0” (High Speed) NTSC/PAL Composite (Switched by menu) Audio line output (monaural) Terminal [AV/DIGITAL/MULTI]: Dedicated jack (14 pin) [HDMI]: MiniHDMI TypeC Dimensions: Approx. 98.3 mm (W)k63.1 mm (H)k23.0 mm (D) [3 14/16q (W)k2 2/4q(H)k7/8q (D)] (excluding the projecting parts) Mass: Approx. 162.5 g/5.73 oz (excluding card and battery) Approx. 183.8 g/6.
PAGE 152
VQT1Z56~BCover_mst.fm 152 ページ２００９年２月３日　火曜日　午前１０時１２分 • SDHC Logo is a trademark. • The “AVCHD Lite” and the “AVCHD Lite” logo are trademarks of Panasonic Corporation and Sony Corporation. • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • HDMI, the HDMI Logo and the High-Definition Multimedia Interface are the registered trademarks or trademarks of HDMI Licensing LLC. • HDAVI Control™ is a trademark of Panasonic Corporation.