Operating Instructions

VQT1V85
64
Advanced (Recording pictures)
∫ About [š]
The following AF area frames are displayed when the camera detects the
faces.
Yellow:
When the shutter button is pressed halfway, the frame turns green when
the camera is focused.
White:
Displayed when more than one face is detected. Other faces that are the same distance
away as faces within the yellow AF areas are also focused.
• Under certain picture-taking conditions including the following cases, the facial recognition
function may fail to work, making it impossible to detect faces. [AF MODE] is switched to [ ].
– When the face is not facing the camera
– When the face is at an angle
– When the face is extremely bright or dark
– When there is little contrast on the faces
– When the facial features are hidden behind sunglasses, etc.
– When the face appears small on the screen
– When there is rapid movement
– When the subject is other than a human being
– When the camera is shaking
– When digital zoom is used
For details on [REC] mode menu settings, refer to P20.
Pictures are taken continuously while the shutter button is pressed.
Select the ones you really like from among the pictures you have taken.
Applicable modes:
ñ· ¿
¢ The burst speed is constant regardless of the transfer speed of the card.
• The burst speed values given above apply when the shutter speed is 1/60 or faster and when
the flash is not activated.
Note
• When the burst mode setting is set to Unlimited
– The burst speed becomes slower halfway. The exact timing of this depends on the type of
card, the picture size and the quality.
– You can take pictures until the capacity of the built-in memory or the card is full.
• The focus is fixed when the first picture is taken.
• When the burst speed is set to [
˜], the exposure and white balance are fixed at the settings
used for the first picture for the subsequent pictures as well. When the burst speed is set to
[
ò], they are adjusted each time you take a picture.
• When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3.
˜ [BURST]
[OFF] ˜ ò
Burst speed (pictures/
second)
—
2.3
¢
(DMC-FS7)
3
¢
(DMC-FS6)
approx. 1.7 (DMC-FS7)
approx. 2 (DMC-FS6)
Number of
recordable
pictures
A
—
max. 3 (DMC-FS7)
max. 4 (DMC-FS6)
Depends on the
remaining capacity of the
built-in memory/card.
›
—
max. 5 (DMC-FS7)
max. 7 (DMC-FS6)
DMC-FS7&FS6EB-VQT1V85_eng.book 64 ページ ２００８年１２月８日 月曜日 午前１１時５３分