Operating Instructions

VQT1V85
102
Others
• Is it a picture that has been recorded with other equipment? In such cases, these pictures may
be displayed with a deteriorated picture quality.
• This unit automatically adjusts the aperture during motion picture recording. At such times, the
sound may break up. This is not a malfunction.
• Is the camera connected to the TV correctly?
> Set the TV input to external input mode.
• Depending on the TV model, the pictures may be extra horizontally or vertically or they may be
displayed with their edges cut off.
• Are you trying to play back the motion pictures by directly inserting the card in the card slot of
the TV?
> Connect the camera to the TV with the AV cable (supplied) and then play back the pictures
on the camera. (P88)
> Check [TV ASPECT] setting. (P25)
• Is the camera connected to the PC correctly?
• Is the camera recognised by the PC correctly?
> Set to [PC] in [USB MODE]. (P25, 81)
> Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
White round spots like soap bubbles appear on the recorded picture.
• If you take a picture with the flash in a dark place or indoors, white
round spots may appear on the picture caused by the flash reflecting of
particles of dust in the air. This is not a malfunction.
A characteristic of this is that the number of round spots and their
position differ in every picture.
[THUMBNAIL IS DISPLAYED] appears on the screen.
The sound of the recorded motion pictures sometimes breaks up.
TV, PC and printer
The picture does not appear on the television.
The display areas on the TV screen and the camera’s LCD monitor are different.
The motion pictures cannot be played back on a TV.
The picture is not displayed fully on the TV.
The picture cannot be transferred when the camera is connected to a PC.
The card is not recognised by the PC. (The built-in memory is recognised.)
DMC-FS7&FS6EB-VQT1V85_eng.book 102 ページ ２００８年１２月８日 月曜日 午前１１時５３分