Operating Instructions

Advanced (Recording pictures)

- 60 -

[REC] mode: ½¾

Taking pictures that match the scene being recorded

(Scene mode)

When you select a scene mode to match the subject and recording situation, the camera sets

the optimal exposure and hue to obtain the desired picture.

Slide the [REC]/[PLAYBACK] selector switch to [¦/!], and then press

[MODE].

Press 3/4 to select [SCENE MODE1] or [SCENE MODE2], and then

press [MENU/SET].

• If you set the scene modes you use frequently in [SCENE MODE1] and [SCENE MODE2],

you can then select them immediately which is very convenient.

Press 3/4/2/1 to select the scene mode.

• You can switch menu screens from any menu item by rotating the

zoom lever.

Press [MENU/SET] to set.

• The menu screen is switched to the recording screen in the selected

scene mode.

∫ About the information

•

If you press [DISPLAY] when selecting a scene mode in step 3, explanations

about each scene mode are displayed. (If you press [DISPLAY] again, the

screen returns to the scene mode menu.)

Note

•

To change the scene mode, press [MENU/SET] and then press 1, and return to step 3 above.

• Refer to P54 for information about the shutter speed.

• The scene mode flash setting is reset to the initial setting when the scene mode is changed.

• When you take a picture with a scene mode that is not adequate for the purpose, the hue of the

picture may differ from the actual scene.

• The following items cannot be set in scene mode because the camera automatically adjusts them to

the optimal setting.

– [INTELLIGENT ISO]

– [SENSITIVITY]

– [COLOR MODE]