Operating Instructions

Preparation

- 32 -

• Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not turn

the camera off during formatting.

• If a card has been inserted, only the card is formatted. To format the built-in memory, remove the

card.

• If the card has been formatted on a PC or other equipment, format it on the camera again.

• It may take longer to format the built-in memory than the card.

• If you set a different language by mistake, select [~] from the menu icons to set the desired

language.

A Jitter detection demonstration

B Movement detection demonstration

• In playback mode, [JITTER, SUBJ. MOVE DEMO.] cannot be

displayed.

• Press [DISPLAY] to close [JITTER, SUBJ. MOVE DEMO.]. Press

[MENU/SET] to close [AUTO DEMO].

• [JITTER, SUBJ. MOVE DEMO.] is an approximation.

• [AUTO DEMO] has no TV output capability.

[FORMAT]

The built-in memory or card is formatted. Formatting irretrievably

deletes all the data so check the data carefully before formatting.

~ [LANGUAGE] Set the language displayed on the screen.

[DEMO MODE]

Select this to display the camera’s features or [JITTER, SUBJ.

MOVE DEMO.].

[JITTER, SUBJ. MOVE DEMO.]

[AUTO DEMO]: The camera’s features are displayed as a

slide show.

DEMO