Operating Instructions

- 21 -

Preparation

Setting Date/Time (Clock Set)

We recommend selecting [LANGUAGE] (P32) from the [SETUP] menu (P27) before

setting date/time.

•

The clock is not set when the camera is shipped.

Press [MENU/SET].

Press 2/1 to select the items (year, month,

day, hour, minute or display sequence), and

press 3/4 to set.

A: Time at the home area

B: Time at the travel destination (P77)

‚: Cancel without setting the clock.

Press [MENU/SET] to set.

• After completing the clock settings, turn the camera off.

Then turn the camera back on, switch to recording mode, and check that the display reflects

the settings that were performed.

• When [MENU/SET] has been pressed to complete the settings without the clock having been

set, set the clock correctly by following the

“Changing the clock setting (In normal picture

mode)

” procedure below.

Turn the camera on.

• The [PLEASE SET THE CLOCK] message appears.

(This message does not appear in [PLAYBACK]

mode.)

A [MENU/SET] button

B Cursor buttons

OFF

/SET