Operating instructions

Advanced (Playback)
- 96 -
 Operations performed during slide show
1 Display control panel by touching screen.
• If no operation is done for 2 seconds, it will return to original status.
AControl panel
A
2 Operate control panel by touching.
CANCEL
#
–
$
+

  
  
B Back to previous picture

C Play/Pause
D Forward to next picture

E Exit Slide show
F Return to slide show set screen
G Reduce volume level
H Increase volume level
¼
These operations can be performed only in the
Pause Mode.
 Changing the Slide Show settings
You can change the settings for Slide Show Playback by
selecting [EFFECT] or [SETUP] on the Slide Show menu screen.
[EFFECT]
This allows you to select the screen effects or music effects
when switching from one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]
• When [URBAN] has been selected, the picture may appear in black and white as a
screen effect.
• [AUTO] can be used only when [CATEGORY SELECTION] has been selected. The
pictures are played back with the recommended effects in each category.
[SETUP]
[DURATION] or [REPEAT] can be set.
Item Settings
[DURATION] 1SEC./2SEC./3SEC./5SEC.
[REPEAT] OFF/ON
[MUSIC] OFF/ON
• [DURATION] can be set only when [OFF] has been selected as the [EFFECT] setting.
• [MUSIC] cannot be selected when [OFF] has been selected as the [EFFECT] setting.
Note
• Motion pictures cannot be played back as a Slide Show. When the motion picture in
[CATEGORY SELECTION] has been selected, the beginning image of each motion
picture is played back.
• It is not possible to add new music effects.