Operating instructions

Advanced (Recording pictures)
- 90 -
[BURST]
For details on [REC] Mode menu settings, refer to P22.
Pictures are taken continuously while the shutter button is pressed.
Select the ones you really like from the pictures you have taken.
Applicable modes: 4 1 / 5
[OFF]/[&]
Burst speed (pictures/second) approx. 1.5
Number of recordable pictures
Depends on the remaining capacity of the
built-in memory/card.
The Burst speed values given above apply when the shutter speed is 1/60 or faster.
Note
The Burst speed becomes slower halfway. The exact timing of this depends on the
type of card, the picture size and the quality.
You can take pictures until the capacity of the built-in memory or the card is full.
The focus is xed when the rst picture is taken.
The exposure and the White Balance are adjusted each time you take a picture.
When the self-timer is used, the number of recordable pictures in Burst Mode is xed to
3.
If you are following a moving subject while taking pictures in a place indoors, outdoors
(landscape) etc. where there is a large difference between the light and shade, the
exposure may not become optimal.
The Burst speed (pictures/second) may become slower depending on the recording
environment such as in dark places, if the ISO sensitivity is high etc.
Burst Mode is not cancelled when the camera is switched off.
If you take pictures in Burst Mode with the built-in memory, it will take time to write the
picture data.
[o] is set for the ash when Burst is set.
Burst cannot be used in [TRANSFORM], [HI-SPEED BURST], [FLASH BURST],
[STARRY SKY], [FILM GRAIN] or [PHOTO FRAME] in Scene Mode.