Operating instructions

Preparation
- 30 -
^ [USB MODE]
Select the USB communication system after or before
connecting the camera to your PC or your printer with
the USB connection cable (supplied).
g [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected
the camera to a PC or a printer supporting PictBridge.
h [PictBridge(PTP)]:
Set after or before connecting to a printer supporting
PictBridge.
j [PC]:
Set after or before connecting to a PC.
• When [PC] is selected, the camera is connected via the “USB Mass Storage”
communication system.
• When [PictBridge(PTP)] is selected, the camera is connected via the “PTP (Picture
Transfer Protocol)” communication system.
k [VIDEO OUT]
Set to match the colour television system in each
country.
(Playback Mode only)
[NTSC]: Video output is set to NTSC system.
[PAL]: Video output is set to PAL system.
• This will work when the AV cable is connected.
l [TV ASPECT]
Set to match the type of TV.
(Playback Mode only)
[}]: When connecting to a 16:9 screen TV
[+]: When connecting to a 4:3 screen TV.
• This will work when the AV cable (P123) is connected.