Operating instructions

VQT1N09
66
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P19.
This can enlarge subjects even more than the optical zoom or extra optical zoom.
Applicable modes:
·½¾n
[OFF]/[ON]
Note
•
Refer to P32 for details.
• If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be set to [MODE 1].
For details on [REC] mode menu settings, refer to P19.
Using these modes, the pictures can be made sharper or softer, the colours of the pictures
can be turned into sepia colours or other colour effects can be achieved.
Applicable modes:
ñ·n
Note
•
When you take pictures in dark places, noise may become visible. To avoid noise, we
recommend setting to [NATURAL].
• You cannot set [COOL] or [WARM] in intelligent auto mode. Also, you cannot set [NATURAL] or
[VIVID] in motion picture mode.
• Different colour modes can be set in different [REC] modes.
For details on [REC] mode menu settings, refer to P19.
Using one of these modes, jitter during picture taking is detected, and the camera
automatically compensates the jitter, enabling jitter-free images to be taken.
Applicable modes:
ñ·½¾n
Note
•
The stabilizer function may not be effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– In digital zoom range.
) [DIGITAL ZOOM]
H [COLOR MODE]
[STANDARD]: This is the standard setting.
[NATURAL]: The picture becomes softer.
[VIVID]: The picture becomes sharper.
[B/W]: The picture becomes black and white.
[SEPIA]: The picture becomes sepia.
[COOL]: The picture becomes bluish.
[WARM]: The picture becomes reddish.
[STABILIZER]
[OFF]
[MODE1]: Jitter is always compensated during [REC] mode.
[MODE2]: The jitter is compensated for when the shutter button is pressed.
VQT1N09_ENG.book 66 ページ ２００７年１２月２６日 水曜日 午後６時５分