Operating instructions

VQT1N09

Advanced (Recording pictures)

White balance fine adjustment

You can adjust the hue to match the water depth and the weather.

1 Press 3 [È] three times to display [WB ADJUST.].

2 Press 2/1 to adjust the white balance.

•

If you adjust the white balance, [ ] appears on the screen in red

or blue.

• Select [0] if you do not want to finely adjust the white balance.

Note

[REC] mode: n

Motion Picture Mode

2 [RED]: Press when the hue is bluish.

1 [BLUE]: Press when the hue is reddish.

•

The focus range becomes the same as macro mode. [5 cm (Wide)/50 cm (Tele) to ¶]

(DMC-FS5)/[5 cm (Wide)/30 cm (Tele) to ¶] (DMC-FS3)

Slide the [REC]/[PLAYBACK] selector switch to [¦/!], and then

press [MODE].

Press 3/4 to select [MOTION PICTURE], and then press [MENU/

SET].

Press the shutter button halfway to focus

and then press it fully to start recording.

A Audio recording

• The available recording time B is displayed on the top

right and the elapsed recording time C is displayed on

the bottom right of the screen.

• After pressing the shutter button fully, release it straight

away. If the button is held down, the sound will not be

recorded for a few seconds when recording starts.

• When the subject is focused, the focus indication

lights.

• The focus and zoom are fixed to the setting when

recording starts (the first frame).

• The audio is also recorded simultaneously from the

built-in microphone on this unit. (Motion pictures

cannot be recorded without audio.)

Press the shutter button fully to stop recording.

• If the built-in memory or the card becomes full in the middle of recording, the camera

stops recording automatically.

AWB

VQT1N09_ENG.book 55 ページ２００７年１２月２６日　水曜日　午後６時５分