Operating instructions

- 115 -
Connecting to other equipment
Note
•
Do not use any other USB connection cables except the supplied one.
• Turn the camera off before connecting or disconnecting the AC adaptor (optional).
• Before inserting or removing a card, turn the camera off, and disconnect the USB connection cable.
• You cannot switch between the built-in memory and the card while the camera is connected to the
printer. Disconnect the USB connection cable, insert (or remove) the card and then connect the USB
connection cable to the printer again.
Selecting a single picture and printing it
Press 2/1 to select the picture and then press
[MENU/SET].
• The message disappears in about 2 seconds.
Press 3 to select [PRINT START] and then press
[MENU/SET].
• Refer to P117 for the items which can be set before starting to
print the pictures.
• Press [MENU/SET] to cancel printing halfway.
• Disconnect the USB connection cable after printing.
1
PictBridge
MENU
MULTI PRINT
1/6
100
_
0001
1/6
1/6
100
100
_
0001
0001
1/6
100
_
0001
PLEASE SELECT
THE PICTURE TO PRINT
SELECT
PRINT
2
MENU
OFF
1
CANCEL
SELECT
SET
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
SINGLE SELECT