Operating instructions

- 105 -

Advanced (Playback)

This mode allows you to automatically display pictures vertically if they were recorded holding

the camera vertically or rotate pictures manually in 90

o steps.

Select [ROTATE] on the [PLAYBACK] mode menu. (P24)

• The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF].

Press 2/1 to select the picture and then press [MENU/

SET].

• Motion pictures and protected pictures cannot be rotated.

Press 3/4 to select the direction to rotate the picture

and then press [MENU/SET].

Press [‚] to return to the menu screen.

• Press [MENU/SET] to close the menu.

Select [ROTATE DISP.] on the [PLAYBACK] mode menu. (P24)

Note

•

When you play back pictures on a PC, they cannot be displayed in the rotated direction unless the

OS or software is compatible with Exif. Exif is a file format for still pictures which allows recording

information etc. to be added. It was established by “JEITA (Japan Electronics and Information

Technology Industries Association)”.

• It may not be possible to rotate pictures that have been recorded with other equipment.

[ROTATE]/ [ROTATE DISP.]

Rotate (The picture is rotated manually)

: The picture rotates clockwise in steps of 90

: The picture rotates anticlockwise in steps of 90

Rotate display (The picture is automatically rotated and displayed)

Press 4 to select [ON] and then press [MENU/SET].

• The pictures are displayed without being rotated when you select

[OFF].

• Refer to P45 for information about how to play back pictures.

Press [MENU/SET] to close the menu.