Operation Manual

74 VQT3H08 VQT3H08 75
Recording with the Face Recognition function
[Face Recog.] (Continued)
Recording Mode:
Recording the place of recording with GPS
Recording Mode:
■
To set the Face Recognition function to [OFF]
Select [Face Recog.] from the [Rec] menu
Select [OFF] with cursor button and then press [MENU/SET]
Editing or deleting information about registered persons
Information about registered people can be edited or deleted.
Select the person or persons to be edited or deleted in step
(→73) and press [MENU/SET]
Use cursor button to select the item and press [MENU/SET]
[Info Edit] Edit name or other registered information. (→73)
[Priority] Set priority order for focus and exposure.
Select the registration order with cursor button and then press [MENU/
SET]
[Delete] Delete information and face pictures of registered persons.
Before use, read “About GPS” (→7) and “User License Agreement for Location Name
Data” (→145).
What is GPS?
GPS is an abbreviation for Global Positioning System, which enables people to find
their locations using GPS satellites.
Receiving signals that contain orbit information and time information from multiple
satellites to calculate one’s current location is referred to as “Positioning”.
This camera can perform positioning when it receives signals from three or more GPS
satellites.
To ensure successful positioning
●
When using the GPS, we recommend holding the camera still for a while with the
GPS antenna facing upward in an outdoor location where you can see the entire
sky.
●
In the following types of locations, it may not be possible to correctly receive the
signals from the GPS satellites. In such cases, positioning may not be possible, or
significant positioning discrepancy may occur.
• Indoors • Underground or underwater (when using a marine case) • In forests
• When in a moving vehicle, such as a car or train • Near buildings or in valleys
• Near high-voltage power lines • In tunnels • Near 1.5 GHz mobile phones, etc.
●
Do not cover the GPS antenna with your hands or anything else.
●
If you are carrying the camera during positioning, do not carry it in a metal carrier or
similar container. Positioning cannot be performed when the camera is covered by a
material such as metal.
Downloaded from www.Manualslib.com manuals search engine