User guide

Advanced (Playback)
67
VQT1C60
The cursor displayed during
playback is the same as 3/4/
2/1.
Stopping motion picture playback
Press 4.
Fast forwarding/Fast rewinding
Press and hold 2/1 during motion picture
playback.
2: Fast rewind
1: Fast forward
The camera returns to normal motion
picture playback when 2/1 is released.
To pause
Press 3 during motion picture playback.
Press 3 again to cancel pause.
Frame-by-frame forwarding/
frame-by-frame rewinding
Press 2/1 while paused.
You can record audio. However, you
cannot play audio only with the
camera. When you want to play audio,
connect the camera to PC (P79) or TV
(P86).
The file format that can be played back
with this camera is QuickTime Motion
JPEG.
Please note that the bundled software
includes QuickTime to play back motion
picture files created with the camera on
the PC. (P80)
Some QuickTime Motion JPEG files
recorded by a PC or other equipment may
not be played back on the camera.
If you play back motion pictures that have
been recorded with other equipment, the
picture quality may deteriorate or the
pictures may not be played back.
When using a high capacity card, it is
possible that fast rewinding may be slower
than usual.
The following functions cannot be used
with motion pictures.
Playback zoom
(While playing back or pausing motion
pictures)
–[ROTATEDISP.]
–[ROTATE]
[DATE STAMP]
–[RESIZE]
–[TRIMMING]
Using the [PLAY] mode
menu
You can use various functions in playback
mode to rotate pictures, set protection for
them etc.
1 Press [MENU/SET].
2 Press 3/4 to select the menu
item and then press 1.
Press 4 at A to switch to the next
menu screen.
You can switch menu screens from any
menu item by rotating the zoom lever.
After performing steps
1 and 2, refer
to the description of the menu item
in the operating instructions and
then set it.
PLAY
1
/
3
ON
OFF
EXIT
MENU
SELECT
FAVORITE
DATE STAMP
ROTATE DISP.
ROTATE
SLIDE SHOW
PLAY
2
/
3
EXIT
MENU
SELECT
RESIZE
COPY
TRIMMING
PROTECT
DPOF PRINT
VQT1C60ENG.book 67 ページ 2007年1月11日 木曜日 午後6時49分