User guide

Advanced (Recording pictures)
46
VQT1C60
We recommend using a tripod and the
self-timer (P39) for taking pictures.
We recommend rotating the zoom lever to
Wide (1k) and being about 1.5 m from the
subject when taking pictures.
The flash setting can be set to Slow sync./
Red-eye reduction [ ] or Forced ON/
Red-eye reduction [ ].
The white balance cannot be set.
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P43)
This mode allows you to take pictures with
a candle-lit atmosphere.
Technique for Candle light mode
If you make the most of the candle light,
you can take successful pictures without
using the flash.
We recommend using a tripod and the
self-timer (P39) for taking pictures.
The focus range becomes the same as
macro mode. [5 cm (Wide)/50 cm (Tele) to
]
The flash setting can be set to Slow sync./
Red-eye reduction [ ] or Forced ON/
Red-eye reduction [ ].
The white balance cannot be set.
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P43)
Select this when you want to take pictures
of sunset view. This allows you to take vivid
pictures of the red colour of the sun.
The flash setting is fixed to Forced OFF
[].
The setting on the AF assist lamp is
disabled.
ISO sensitivity is fixed to [ISO100].
The white balance cannot be set.
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P43)
This takes pictures of a baby with a healthy
complexion. When you use the flash, the
light from it is weaker than usual.
You can set two different birthdays by using
[BABY1] and [BABY2]. You can display the
set age when playing back the pictures and
stamp the age on the recorded pictures
with [DATE STAMP] (P71).
The age can also be printed on each
picture by using the software [LUMIX
Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the
CD-ROM (supplied). (For information
about printing, refer to the separate
operating instructions for PC connection.)
Age display setting
To have the age displayed, first set the
birthday and then be sure to set
[WITH AGE] before taking the pictures.
Birthday setting
1 Press 3/4 to select [BIRTHDAY SET.]
and then press [MENU/SET].
2 When the message appears, press 2/1
to select items (Year/Month/Day) and
then press 3/4 to set them.
3 Press [MENU/SET] to finish the setting.
• The focus range becomes the same as macro
mode. [5 cm (Wide)/50 cm (Tele) to
]
[CANDLE LIGHT]
[SUNSET]
MENU
SET
MENU
SET
[BABY1]/
[BABY2]
1
2
MENU
SET
BABY1
WITHOUT AGE
BIRTHDAY SET.
WITH AGE
SELECT SET
MENU
CANCEL
1
VQT1C60ENG.book 46 ページ 2007年1月11日 木曜日 午後6時49分