Digital Camera Operating Instructions

Recording pictures (basic)
39
Taking Pictures using Burst Mode
Preparation
• Set the mode dial except for [ ]/[ ]. (P8)
1 Switch the burst mode setting.
: High speed
;
: Low speed
;
No display (cancelled)
2 Take pictures.
• Keep pressing the shutter button
fully to activate the burst mode.
¬ Suggestions/Tips ¬
• If the flash is activated, you can record
only 1 picture.
• In Simple mode [ ], the burst speed
is fixed to Low. (P29)
• You cannot take pictures with audio in
the burst mode.
• When setting auto bracket and the
burst mode simultaneously, auto
bracket will be performed.
• Burst mode will not perform as
described if a MultiMediaCard is used
in place of an SD Memory Card. The
reading/writing speed of a
MultiMediaCard is slower than that of
an SD Memory Card.
• In the following cases, the burst speed
becomes slow due to the signal
processing, however, this is not a
malfunction.
(a) When the shutter speed becomes
slow because you take pictures in
dark places.
(b) When you use the camera in high
temperature.
The number of pictures taken at a time
is not limited in the above cases.
• When the ISO sensitivity is set to
[ISO400], you cannot use the burst
mode. (DMC-LC80)
ª Number of pictures recorded in
burst mode
°1 When the shutter speed is faster
than 1/60 and the flash is not
activate.
°2 2304k1728 picture size
°3 2048k1536
picture size
H
1600
19
H
L
Burst speed
(pictures/
second)
Number of
recordable
pictures (pictures)
DMC-
LC80
2.7
( °1 )
1.5 max. 5 max. 9
DMC-
LC70
3.3
( °1 )
2
max. 3
(
°2 ) /
max. 5
max. 5
(
°2 ) /
max. 10
DMC-
LC50
3.5
( °1 )
2 max. 5
max. 8
( °3 ) /
max. 10
H L
LC80GN.book 39 ページ ２００４年６月１７日 木曜日 午前１０時１８分