Owner’s Manual for advanced features Digital Camera Model No. DMC-GX85 Please read these instructions carefully before using this product, and save this manual for future use. Message Display P316 Troubleshooting P318 Finding the information you need P2 Contents P4 Contents by Function P9 Menu list P187 Register online at http://shop.panasonic.com/support SQW0669 (U.S.
Finding the information you need In this “Owner’s Manual for advanced features”, you can find the information you need from the following pages. By clicking a page number, you can jump to the linked page and quickly find the information. Search from “Contents” Click this icon to jump to “Contents”.
How to use this manual About the indication of the applicable mode Applicable modes: The icons indicate the modes available for a function. • Black icons: Applicable modes • Gray icons: Unavailable modes [ ] indicates that available functions vary depending on the registered Recording Mode. ∫ About the symbols in the text : MENU Wi-Fi Indicates that the menu can be set by pressing [MENU/SET] button. : Indicates that the Wi-Fi setting can be made by pressing [Wi-Fi] button.
Contents Finding the information you need..............................................................................2 How to use this manual.............................................................................................3 Contents by Function ................................................................................................9 1. Before Use Care of the camera .................................................................................................
3. Recording Modes Taking Pictures using the Automatic Function (Intelligent Auto Mode) ............................................................................................62 • Recording night scenes ([iHandheld Night Shot]) ..........................................65 • Combining pictures into a single picture with rich gradation ([iHDR]).............66 • Taking a picture with a blurred background (Defocus Control).......................
Selecting pictures from 4K burst file and saving ...................................................126 Selecting a focus point after recording ([Post Focus]) ..........................................131 • Recording using [Post Focus] ......................................................................131 • Selecting the desired focus area and saving a picture .................................133 Select a Drive Mode..........................................................................................
• Displaying Pictures by Recording Date (Calendar Playback) ......................183 Playing Back Group Pictures ................................................................................184 Deleting Pictures ...................................................................................................186 9. Using Menu Functions Menu list................................................................................................................187 • [Rec] menu .............................
11. Connecting to other equipment Watching 4K motion pictures on a TV/ Saving 4K motion pictures on your PC or recorder .........................................................................................290 • Watching motion pictures in 4K ....................................................................290 • Storing 4K motion pictures ...........................................................................291 Playing Back Pictures on a TV Screen .................................................
Contents by Function Recording Recording Recording Mode .............................. P43 [Preview].......................................... P75 Panorama Shot Mode ..................... P77 [4K PHOTO] .................................. P118 [Post Focus] .................................. P131 Aperture Bracket ...........................P140 Focus Bracket ............................... P140 [Time Lapse Shot] ......................... P141 [Stop Motion Animation] ................P143 [Multi Exp.]..........
Motion Picture Motion Picture Creative Video Mode ....................... P89 [Silent Operation]............................. P90 [Rec Format].................................. P168 [Rec Quality] .................................. P168 Motion pictures in 4K ..................... P166 [4K Live Cropping] .........................P171 Recording still pictures while recording motion pictures ..............P174 [Snap Movie]..................................P176 Audio [Mic Level Adj.] ...........................
Wi-Fi Connect “Image App” .................................. P254 [WPS (Push-Button)] ............. P283, 285 Direct connection...........................P285 In combination with other devices Playing back pictures on a TV .......P264 Printing images ..............................P270 Sending images to an AV device ............................................P271 Sending images to a PC ................P272 Sending images to a web service ...........................................P274 Using [Cloud Sync.
1. Before Use Care of the camera Do not subject to strong vibration, shock, or pressure. • The lens, monitor, or external case may be damaged if used in the following conditions. It may also malfunction or image may not be recorded if you: – Drop or hit the camera. – Press hard on the lens or the monitor. This camera is not dust/drip/water proof. Avoid using the camera in places with a lot of dust, water, sand, etc.
1. Before Use Standard Accessories Check that all the accessories are supplied before using the camera. • The accessories and their shape will differ depending on the country or area where the camera was purchased. For details on the accessories, refer to “Basic Owner’s Manual”. • Battery Pack is indicated as battery pack or battery in the text. • SD Memory Card, SDHC Memory Card and SDXC Memory Card are indicated as card in the text. • The card is optional.
1. Before Use Names and Functions of Components ∫ Camera body 1 23 4 8 9 10 11 5 6 7 12 17 1 Camera ON/OFF switch (P35) 11 Charging lamp (P22)/ 2 Status indicator (P35)/ Wi-Fi® connection lamp (P252) 16 15 14 13 Stereo microphone (P208) • Be careful not to cover the microphone with your finger. Doing so may make sound difficult to record.
1. Before Use 19 20 21 22 23 24 25 26 27 28 29 30 33 34 18 31 32 40 39 38 37 36 35 18 Touch screen (P51)/monitor (P309) 34 [(] (Playback) button (P179) 19 Eyecup (P330) 35 [DISP.
1. Before Use ∫ Lens H-FS12032 H-FS35100 3 1 4 1 H-H020A 4 5 2 H-FS14140 1 1 2 3 4 5 6 3 2 5 3 1 4 5 2 6 3 4 Lens surface Zoom ring (P150) Contact point Lens fitting mark (P32) Focus ring (P107) [O.I.S.] switch (P146) • The interchangeable lens (H-FS12032) does not have a focus ring, but you can use manual focus by operating the camera. (P106) • The interchangeable lens (H-H020A) utilizes a lens drive system to realize a compact and bright F1.7 lens.
1. Before Use About the Lens This unit can use the dedicated lenses compatible with the Micro Four ThirdsTM System lens mount specification (Micro Four Thirds mount). You can also use a lens of any of the following standards by attaching a mount adaptor.
2. Getting Started/Basic Operations Attaching the Shoulder Strap • We recommend attaching the shoulder strap when using the camera to prevent it from dropping. 1 Pass the shoulder strap through the shoulder strap eyelet on the camera body. A: Shoulder strap eyelet A 2 3 4 Pass the end of the shoulder strap through the ring in the direction of the arrow and then pass it through the stopper. Pass the end of the shoulder strap through the hole on the other side of the stopper.
2. Getting Started/Basic Operations Charging the Battery Use the dedicated AC adaptor (supplied), USB connection cable (supplied) and battery. • The battery is not charged when the camera is shipped. Charge the battery before use. • Charge the battery only when it is inserted in the camera.
2. Getting Started/Basic Operations Inserting the Battery 1 1: Slide the release lever in the direction of the arrow. 2: Open the card/battery door. • Always use genuine Panasonic batteries. • If you use other batteries, we cannot guarantee the quality of this product. 2 Being careful about the battery orientation, securely insert it all the way in, and then check that it is locked by the lever A. To remove the battery, move the lever A in the direction of the arrow.
2. Getting Started/Basic Operations Charging • Charge the battery in areas with an ambient temperature, between 10 oC and 30 oC (50 oF and 86 oF) (same as the battery temperature), is recommended. Insert the battery into this unit. Check that this unit is turned off. A Connect the USB connection cable (supplied) to the [CHARGE] socket. • Place the camera in an upright position, and find the terminal at the bottom.
2. Getting Started/Basic Operations ∫ About the charging lamp Lit red: Off: Blinking red: Charging. Charging has completed. (When charging is complete, disconnect the camera from the power outlet or computer.) Charging error. (P318) ∫ Charging time When using the AC adaptor (supplied) Charging time Approx. 190 min • The indicated charging time is for when the battery has been discharged completely. The charging time may vary depending on how the battery has been used.
2. Getting Started/Basic Operations • Do not leave any metal items (such as clips) near the contact areas of the power plug. Otherwise, a fire and/or electric shocks may be caused by short-circuiting or the resulting heat generated. • Do not use any other USB connection cables except the supplied one. This may cause malfunction. • Do not use any other AC adaptors except the supplied one. • Do not use a USB extension cable.
2. Getting Started/Basic Operations Approximate operating time and number of recordable pictures By CIPA (Camera & Imaging Products Association) standard When a Panasonic SDHC memory card and the supplied battery are used ∫ Recording still pictures (when using the Monitor) When the interchangeable lens (H-FS12032) is used Number of recordable pictures Approx. 290 pictures Recording time Approx. 145 min When the interchangeable lens (H-FS35100) is used Number of recordable pictures Approx.
2. Getting Started/Basic Operations ∫ Recording motion pictures (when using the monitor) [AVCHD] (Recording with picture quality set to [FHD/17M/60i]) When the interchangeable lens (H-FS12032) is used Recordable time Approx. 100 min Actual recordable time Approx. 50 min When the interchangeable lens (H-FS35100) is used Recordable time Approx. 100 min Actual recordable time Approx. 50 min When the interchangeable lens (H-H020A) is used Recordable time Approx.
2. Getting Started/Basic Operations [MP4] (Recording with picture quality set to [4K/100M/30p]) When the interchangeable lens (H-FS12032) is used Recordable time Approx. 80 min Actual recordable time Approx. 40 min When the interchangeable lens (H-FS35100) is used Recordable time Approx. 80 min Actual recordable time Approx. 40 min When the interchangeable lens (H-H020A) is used Recordable time Approx. 80 min Actual recordable time Approx.
2. Getting Started/Basic Operations Inserting and Removing the Card (optional) • Check that this unit is turned off. 1 1: Slide the release lever in the direction of the arrow. 2: Open the card/battery door. • Always use genuine Panasonic batteries. • If you use other batteries, we cannot guarantee the quality of this product. 2 Push it securely all the way until you hear a “click” while being careful about the direction in which you insert it.
2. Getting Started/Basic Operations Card Information The following cards which conform to the SD standard can be used with this unit. (These cards are indicated as card in the text.) • This unit is compatible with UHS-I UHS Speed Class 3 SD Memory Card (512 MB to 2 GB) standard SDHC/SDXC memory cards. • Operation of the cards on the left has been confirmed with Panasonic’s cards.
2. Getting Started/Basic Operations Access to the card The access indication displays red when pictures are being recorded on the card. • During access (image writing, reading and deleting, formatting etc.), do not turn this unit off, remove the battery, card or disconnect the AC adaptor (optional). Furthermore, do not subject the camera to vibration, impact or static electricity. The card or the data on the card may be damaged, and this unit may no longer operate normally.
2.
2. Getting Started/Basic Operations • Depending on the recording conditions and the type of card, the number of recordable pictures and available recording time vary. • MP4 motion pictures with a [Rec Quality] size of [FHD], [HD] or [VGA]: Recording stops when the continuous recording time exceeds 29 minutes and 59 seconds or the file size exceeds 4 GB.
2. Getting Started/Basic Operations Attaching/Removing the Lens By changing the lens, you will increase your picture taking-options and further your enjoyment of the camera. • Check that the camera is turned off. • When attaching or detaching the interchangeable lens (H-FS12032/H-FS35100), retract the lens barrel. • Change lenses where there is not a lot of dirt or dust. Refer to P329 when dirt or dust gets on the lens. Detaching the lens • Attach the lens cap.
2. Getting Started/Basic Operations Zoom operations When using the interchangeable lens (H-FS12032/ H-FS35100/H-FS14140) T Rotate the zoom ring of the lens. W T side: Enlarges distant subject W side: Widens angle of view Attaching the Lens Hood When recording into strong backlight, irregular reflection may occur within the lens. The lens hood reduces the inclusion of unwanted light in the recorded images and lowers the drop in contrast.
2. Getting Started/Basic Operations Temporarily Storing the Lens Hood When using the interchangeable lens (H-FS35100) 1 Turn the lens hood in the direction of the arrow to detach it. 2 Align the mark C ( ) on the lens hood with the mark on the tip of the lens. 3 Turn the lens hood in the direction of the arrow until it clicks into place. When using the interchangeable lens (H-FS14140) 1 Turn the lens hood in the direction of the arrow to detach it.
2. Getting Started/Basic Operations Setting Date/Time (Clock Set) • The clock is not set when the camera is shipped. 1 Turn the camera on. • When the camera is turned on, the status indicator 1 lights up green. • If the language select screen is not displayed, proceed to step 4. 2 3 4 5 Press [MENU/SET]. Press 3/4 to select the language, and press [MENU/SET]. Press [MENU/SET]. Press 2/1 to select the items (year, month, day, hour, minute), and press 3/4 to set.
2. Getting Started/Basic Operations 7 8 9 When [The clock setting has been completed.] is displayed, press [MENU/SET]. When [Please set the home area] is displayed, press [MENU/SET]. Press 2/1 to select the home area, and then press [MENU/SET]. • When an interchangeable lens (H-FS12032/H-FS35100) is used and the lens barrel is retracted, recording is not possible (a message will be displayed). Rotate the zoom ring to extend the lens. (P38) Re-adjusting the clock Select [Clock Set] in the [Setup] menu.
2. Getting Started/Basic Operations Basic Operations Tips for taking good pictures Hold the camera gently with both hands, keep your arms still at your side and stand with your feet slightly apart. • Do not cover the flash, AF Assist lamp A, microphone B, or speaker C with your fingers or other objects. • Make sure your footing is stable and there is no danger of colliding with another person or object in the vicinity while taking pictures.
2. Getting Started/Basic Operations Extending/retracting the lens [when the interchangeable lens (H-FS12032/H-FS35100) is attached] ∫ How to Extend the Lens Rotate the zoom ring in the direction of arrow 1 from position A (the lens is retracted) to position B [12 mm to 32 mm (H-FS12032), 35 mm to 100 mm (H-FS35100)] to extend the lens. • When the lens barrel is retracted, images cannot be recorded.
2. Getting Started/Basic Operations Adjust the angle of the monitor • Be careful not to catch your finger, etc. in the monitor. • When adjusting the angle of the monitor, be careful not to apply too much force, as this may cause damage or malfunction. • When not using this unit, close the monitor completely back to the original position. ∫ Free angle shooting The monitor can be rotated to suit your needs. This is convenient as it allows you to take pictures from various angles by adjusting the monitor.
2. Getting Started/Basic Operations Using the Viewfinder Diopter adjustment Adjust the diopter to suit your vision so that you can see the characters displayed in the viewfinder clearly. Switching the Monitor/Viewfinder Press [LVF] to switch between the Monitor and Viewfinder. A [LVF] button B Eye sensor • You can also use the button as a function button. (P58) Press [LVF].
2. Getting Started/Basic Operations ∫ Notes on automatic viewfinder/monitor switching Automatic viewfinder/monitor switching enables the eye sensor to switch the display to the viewfinder automatically when you bring your eye or an object near it. • Eye sensor might not work properly depending on the shape of your eyeglasses, the way you hold the camera, or bright light shining around the eyepiece. In that case, press [LVF] to switch the display.
2. Getting Started/Basic Operations Shutter button (Taking pictures) The shutter button works in two steps. To take a picture, press it. Press the shutter button halfway to focus. A Aperture value B Shutter speed C Focus indication • Aperture value and shutter speed are displayed. (It will flash in red if the correct exposure is not achieved, except when set to flash.) • Once the subject is in focus, the focus indication is displayed. (When the subject is not in focus, the indication flashes.) C 3.
2. Getting Started/Basic Operations Mode dial (Selecting a Recording Mode) Select the mode by rotating the mode dial. • Rotate the mode dial slowly to select the desired mode.
2. Getting Started/Basic Operations Front Dial/Rear Dial Front Dial Rotating: Selection of items or setting of values is performed during the various settings. Rear Dial Rotating: Selection of items or setting of values is performed during the various settings. Pressing: Operations that are the same as [MENU/SET] button, such as determine settings, etc., are performed during the various settings. • This owner’s manual describe operations of the front dial/rear dial as follows: e.g.
2. Getting Started/Basic Operations Temporarily changing the items assigned to the front/rear dials ([Dial Operation Switch]) You can temporarily change the items assigned to the front/rear dials using the function button to which [Dial Operation Switch] is assigned. • You can set the items to be assigned temporarily to the front/rear dials in [Dial Operation Switch Setup] in [Dial Set.] in the [Custom] menu. (P46) 1 Set a function button to [Dial Operation Switch].
2. Getting Started/Basic Operations ∫ Setting the operation methods of the front dial and rear dial MENU > [Custom] > [Dial Set.] [Assign Dial (F/SS)] Assigns the operations of the aperture value and shutter speed in Manual Exposure Mode. [ F SS]: Assigns the aperture value to the front dial, and the shutter speed to the rear dial. [ SS F]: Assigns the shutter speed to the front dial, and the aperture value to the rear dial.
2. Getting Started/Basic Operations Cursor buttons/[MENU/SET] button Pressing the cursor button: Selection of items or setting of values etc., is performed. Pressing [MENU/SET]: Confirmation of setting contents, etc., is performed. • This owner’s manual expresses the up, down, left, and right of the cursor button as 3/4/2/1. • By assigning [Cursor Button Lock] to a function button, you can disable the cursor buttons and the [MENU/SET] button.
2. Getting Started/Basic Operations [DISP.] button (Switching the displayed information) Press [DISP.] to switch the information displayed on the screen. • If the information on the screen is not displayed any longer because no operation was performed for some time, press the [DISP.] button or touch the screen to display the information again. In Recording Mode Switching the display method of the viewfinder/monitor MENU > [Custom] > [LVF Disp.Style] MENU > [Custom] > [Monitor Disp.
2. Getting Started/Basic Operations ∫[ ] Monitor style display layout (Example of monitor style display) With information 60p 4:3 L 0 With information (tilt sensor display) Without information AFS 60p 4:3 L AFS 0 98 Without information (tilt sensor display) 98 On-monitor recording information¢ Turned off ISO AUTO AFS 0 0 0 4:3 AWB L Wi-Fi Fn 98 ¢ When the on-monitor recording information screen is displayed, you can touch the desired item and change its setting directly.
2. Getting Started/Basic Operations In Playback Mode Detailed information display With information 4:3 L 1/98 98 Histogram display Without information (Highlight display)¢ 60 F3.5 0 AWB ISO 200 WB AFS P F3.5 60 STD. 0 ISO200 10:00 DEC. 1.2016 F3.5 60 0 200 AWB 4:3 L s RGB 1/98 100-0001 100-0001 Without information ¢This is displayed if [Highlight] (P216) in the [Custom] menu is set to [ON].
2. Getting Started/Basic Operations Touch screen (Touch operations) Touch screen of this unit is capacitive. Touch the panel directly with your bare finger. ∫ Touch To touch and release the touch screen. Fn5 Fn6 Fn7 Fn6 Fn8 Fn9 SNAP ∫ Drag A movement without releasing the touch screen. A ∫ Pinch (enlarge/reduce) Pinch the touch screen apart (enlarge) or together (reduce) with two fingers. B 2.0X • Touch the screen with the clean and dry finger.
2. Getting Started/Basic Operations Taking Pictures Using the Touch Function Taking pictures using the Touch Shutter function Applicable modes: Just by touching the subject you want as your point of focus, the camera will focus on the subject and take the picture automatically. 1 Touch [ ]. 2 Touch [ × ]. • Icon will change to [ ], and taking a picture with the Touch Shutter function becomes possible. AE 3 Touch the subject you wish to focus on, and then take a picture.
2. Getting Started/Basic Operations Easily Optimizing the Brightness for a Specified Area (Touch AE) Applicable modes: You can easily optimize the brightness for a touched position. When the face of the subject appears dark, you can brighten the screen according to the brightness of the face. 1 Touch [ ]. 2 Touch [ AE ]. • The setting screen for the brightness optimization position is displayed. • [Metering Mode] is set to [ AE ], which is used AE exclusively for the Touch AE.
2. Getting Started/Basic Operations Setting menu items You can either operate the buttons or touch the monitor to set menu items. 1 Press [MENU/SET]. [Rec] (P187) This menu lets you set the aspect ratio, number of pixels, 4K Photo and other aspects of the pictures you are recording. [Motion Picture] (P208) This menu lets you set the [Rec Format], [Rec Quality], and other aspects for motion picture recording.
2. Getting Started/Basic Operations 3 Press 3/4 of the cursor button to select the setting and press [MENU/SET]. • The setting can also be made by selecting an option by rotating the rear dial and then pressing the rear dial. • Depending on the menu item, its setting may not appear or it may be displayed in a different way. (In touch operation) Touch the Setting to set. • There are functions that cannot be set or used depending on the modes or menu settings being used on the camera.
2. Getting Started/Basic Operations Calling frequently-used menus instantly (Quick Menu) By using the Quick Menu, some of the menu settings can be easily found. • The features that can be adjusted using Quick Menu are determined by the mode or a display style the camera is in. 1 Press [ ] to display the Quick Menu. • You can also use the button as a function button. (P58) 2 Rotate the front dial to select the menu item. 60p 4:3 0 3.5 60 3 4 Rotate the rear dial to select the setting.
2. Getting Started/Basic Operations Customizing the Quick Menu settings When [Q.MENU] (P218) in the [Custom] menu is set to [CUSTOM], the Quick Menu can be changed as desired. Up to 15 items can be set to the Quick Menu. 1 Press 4 to select [ ] and then press [MENU/SET]. AFS 4:3 L 2 3 Press 3/4/2/1 to select the menu item in the top row and then press [MENU/SET]. Press 2/1 to select the empty space in the bottom row and then press [MENU/SET].
2. Getting Started/Basic Operations Assigning frequently used functions to the buttons (function buttons) You can assign recording functions, etc. to specific buttons and icons. • Some functions cannot be assigned depending on the function button. 1 Select the menu. (P54) MENU 2 3 > [Custom] > [Fn Button Set]> [Setting in REC mode]/[Setting in PLAY mode] Press 3/4 to select the function button you want to assign a function to and then press [MENU/SET].
2. Getting Started/Basic Operations Using the function buttons during recording You can use assigned functions by pressing a function button when recording. ∫ Using function buttons with touch operations 1 2 Touch [ ]. Touch [Fn5], [Fn6], [Fn7], [Fn8] or [Fn9]. Fn5 Fn6 Fn7 Fn6 Fn8 Fn9 SNAP ∫ Functions that can be assigned in [Setting in REC mode] [Rec] menu/Recording functions – [Metering Mode] (P194) – [Bracket] (P138) – [Focus Mode] (P95) – [Highlight Shadow] (P195) – [i.Dynamic] (P196) – [i.
2. Getting Started/Basic Operations – [Silent Mode] (P210) – [Peaking] (P214) – [Histogram] (P215): [Fn8]¢ – [Guide Line] (P215) – [Zebra Pattern] (P216) [Custom] menu – [Monochrome Live View] (P217) – [Rec Area] (P218) – [Step Zoom] (P154) – [Zoom Speed] (P154) – [Touch Screen] (P219) ¢ Function button settings at the time of purchase. • When set to [Focus Area Set], it is possible to display the position setting screen of either AF area or MF Assist.
2. Getting Started/Basic Operations Entering Text 1 Press 3/4/2/1 to select text and then press [MENU/SET] to register. • Move the cursor to [ • • • • 2 ] and then press [MENU/SET] to switch text between [A] (capitals), [a] (lower case), [1] (numbers) and [&] (special characters). To enter the same characters in a row, move the cursor by rotating the rear dial to the right.
3. Recording Modes Taking Pictures using the Automatic Function (Intelligent Auto Mode) Recording Mode: In this mode, the camera makes the optimal settings for the subject and scene, so we recommend it when you wish to leave the settings to the camera and record without thinking about them. 1 Set the mode dial to [¦]. • The camera will switch to either the most recently used of Intelligent Auto Plus Mode or Intelligent Auto Mode. At the time of purchase, the mode is set to Intelligent Auto Plus Mode.
3. Recording Modes The camera detects scenes automatically (Scene Detection) ( : When taking pictures, : When recording motion pictures) [i-Portrait] [i-Scenery] [i-Macro] [iHandheld Night Shot]¢2 [i-Food] [i-Baby]¢3 ¦ [i-Night Portrait]¢1 [i-Night Scenery] [i-Sunset] [i-Low Light] ¢1 Only displayed when the built-in flash is open. ¢2 Only displayed when [iHandheld Night Shot] is set to [ON]. (P65) ¢3 When [Face Recog.
3. Recording Modes Intelligent Auto Plus Mode allows you to adjust some settings such as the brightness and color tone while also using Intelligent Auto Mode for other settings so that you can record images more suited to your preferences. To record images with more ease, use Intelligent Auto Mode.
3. Recording Modes Recording night scenes ([iHandheld Night Shot]) Recording Mode: When [ ] is detected while taking handheld night shots, pictures of the night scenery will be taken at a high burst speed and composed into a single picture. This mode is useful if you want to take stunning night shots with minimal jitter and noise, without using a tripod. MENU > [Rec] > [iHandheld Night Shot] > [ON]/[OFF] • The angle of view will be slightly narrower.
3. Recording Modes Combining pictures into a single picture with rich gradation ([iHDR]) Recording Mode: When there is, for example, strong contrast between the background and the subject, multiple still pictures are recorded with differing exposures and combined to create a single still picture rich in gradation. [iHDR] works automatically as needed. When it does, [ ] is displayed on the screen. MENU > [Rec] > [iHDR] > [ON]/[OFF] • The angle of view will be slightly narrower.
3. Recording Modes Taking a picture with a blurred background (Defocus Control) Recording Mode: 1 Press the rear dial to display the setting screen. • Each time the rear dial is pressed in Intelligent Auto Plus Mode, the camera switches between brightness setting operation (P68), Defocus Control operation, and normal operation. • Each time the rear dial is pressed in Intelligent Auto Mode, the camera switches between Defocus Control operation and normal operation.
3. Recording Modes Recording images by changing the brightness or color tone Recording Mode: ∫ Setting brightness 1 Press the rear dial to display the setting screen. • Each press of the rear dial switches among brightness setting, Defocus Control (P67) and end operation. 2 Rotate the rear dial to adjust brightness. • You can adjust the Exposure Bracket setting by pressing OFF 3/4 while the brightness setting screen is displayed.
3. Recording Modes Taking Pictures with Automatically Adjusted Aperture and Shutter Speed (Program AE Mode) Recording Mode: The camera automatically sets the shutter speed and the aperture value according to the brightness of the subject. You can take pictures with greater freedom by changing various settings in the [Rec] menu. 1 2 Set the mode dial to [ ]. Press the shutter button halfway and display the aperture value and shutter speed value on the screen. 3.
3. Recording Modes Program Shift In Program AE Mode, you can change the preset aperture value and shutter speed without changing the exposure. This is called Program Shift. You can make the background more blurred by decreasing the aperture value or record a moving subject more dynamically by slowing the shutter speed when taking a picture in Program AE Mode. 1 2 Press the shutter button halfway and display the aperture value and shutter speed value on the screen.
3. Recording Modes Taking Pictures by Specifying the Aperture/ Shutter Speed Recording Mode: (Example: In Manual Exposure Mode) A Aperture value SS F 8 15 30 4.0 5.6 5.6 30 0 60 125 8.0 11 +3 Small It becomes easier to defocus the background. Large It becomes easier to maintain focus as far as the background. Slow It becomes easier to express movement. Fast It becomes easier to freeze movement.
3. Recording Modes Aperture-Priority AE Mode When you set the aperture value, the camera automatically optimizes the shutter speed for the brightness of the subject. 1 2 Set the mode dial to [ ]. Set the aperture value by rotating the rear dial or the front dial. A Aperture value B Exposure meter • It will switch between aperture setting operation and Exposure Compensation operation every time the rear dial is pressed. SS F 60 4.0 30 5.6 15 8 8.0 11 4 16 8.
3. Recording Modes Manual Exposure Mode Determine the exposure by manually setting the aperture value and the shutter speed. 1 2 Set the mode dial to [ ]. A Rotate the rear dial to set the shutter speed, and rotate the front dial to set the aperture value. A B C D Exposure meter Aperture value Shutter speed Manual Exposure Assistance SS F 8 15 30 4.0 5.6 5.6 30 0 60 125 8.0 11 +3 B C D Available Shutter Speed (Sec.
3. Recording Modes ∫ About [T] (Time) If you set the shutter speed to [T] (Time) and fully press the shutter button, an exposure starts. (Continues up to approximately 120 seconds.) If you press the shutter button again, the exposure will end. Use this when you want to keep the shutter open for a long time to take pictures of fireworks, a night scene etc. • It can only be used with Manual Exposure Mode.
3. Recording Modes Confirm the Effects of Aperture and Shutter Speed (Preview Mode) Applicable modes: The effects of aperture and shutter speed can be checked by using the Preview Mode. • Confirm the effects of aperture: You can check the depth of field (effective focus range) before taking a picture by closing the diaphragm blades to the aperture value you set. • Confirm the effects of shutter speed: Movement can be confirmed by displaying the actual picture that will be taken with that shutter speed.
3. Recording Modes Easily set aperture/shutter speed for suitable exposure (One Push AE) Applicable modes: When the exposure setting is too bright or too dark, you can use one push AE to achieve a suitable exposure setting. How to tell if the exposure is not adequate • If the aperture values and shutter speed blink red when the shutter button is pressed halfway. • If the Manual Exposure Assistance (P73) is anything other than when in Manual Exposure mode. 1 2 Set a function button to [One Push AE].
3. Recording Modes Taking panorama pictures (Panorama Shot Mode) Recording Mode: Consecutive photos taken while the camera is moved are combined to form a panorama. 1 Set the mode dial to [ ]. • After the screen that asks you to check the recording direction is displayed, the horizontal/vertical guidelines will be displayed. 2 3 Press the shutter button halfway to focus. Press the shutter button fully and move the camera in a small circle in the direction of the arrow on the screen.
3. Recording Modes ∫ Changing the recording direction and angle of view (image size) of panorama pictures MENU > [Rec]>[Panorama Settings] [Direction] [Picture Size] Sets the recording direction. Sets the angle of view (image size). [STANDARD]/[WIDE] • The number of recording pixels in the horizontal and vertical directions of the panorama picture varies depending on the image size, the recording direction and the number of combined pictures. The maximum number of pixels is shown below.
3. Recording Modes ∫ About playback Pressing 3 will start scrolling playback automatically in the same direction as the recording. 1/98 • The following operations can be performed during scrolling playback. 3 Start panorama playback/Pause¢ 4 Stop ¢ When the playback is paused, you can scroll forwards and backwards by dragging the screen. When the scroll bar is touched, the playback position jumps to the touched position.
3. Recording Modes Taking Pictures that match the Scene being recorded (Scene Guide Mode) Recording Mode: If you select a scene to suit the subject and recording conditions with reference to the example images, the camera will set optimal exposure, color, and focus, allowing you to record in a manner appropriate to the scene. 1 2 Set the mode dial to [ ]. Press 2/1 to select the scene. • The scene can also be selected by dragging an example image or the slide bar. 3 Press [MENU/SET].
3. Recording Modes Types of Scene Guide Mode Displaying the description of each scene and recording tips Press [DISP.] while the scene selection screen is displayed. • When it is set to the guide display, detailed explanations and tips for each scene are displayed. Normal display Guide display [Clear Portrait] List display [Silky Skin] • The smoothing effect is applied to the part that has a similar tone to the complexion of a subject, as well.
3. Recording Modes [Glistening Water] [Clear Nightscape] • Star filter used in this mode may cause glistening effects on the objects other than water surface. [Cool Night Sky] [Warm Glowing Nightscape] [Artistic Nightscape] [Glittering Illuminations] [Handheld Night Shot] [Clear Night Portrait] • Do not move the unit during • We recommend using a tripod the continuous shooting after pressing the shutter button. • The angle of view will be slightly narrower. and the self-timer.
3. Recording Modes Taking Pictures with different image effects (Creative Control Mode) Recording Mode: This mode records with additional image effects. You can set the effects to add by selecting example images and checking them on the screen. 1 2 Set the mode dial to [ ]. Press 3/4 to select the image effects (filters). A A preview display • You can also select the image effects (filters) by touching the example images.
3. Recording Modes Types of image effects Displaying the description of each image effect Press [DISP.] while the image effect selection screen is displayed. • When it is set to the guide display, explanations for each picture effect are displayed.
3. Recording Modes ∫ Setting the type of defocus ([Miniature Effect]) 1 Press [Fn1] to display the setting screen. • Setting screen can also be displayed by touching in order of [ 2 Press 3/4 or 2/1 to move the in-focus portion. • You can also move the in-focus portion by touching the ] then [ ]. screen on the recording screen. ] allows you to set the recording orientation (defocus orientation). • Touching [ 3 4 Rotate the rear dial to change the size of in-focus portion.
3. Recording Modes ∫ Setting the position and size of the light source ([Sunshine]) 1 Press [Fn1] to display the setting screen. • Setting screen can also be displayed by touching in order of [ 2 Press 3/4/2/1 to move the center position of the light source. • The position of the light source can also be moved by touching the screen. ] then [ ]. Point for when placing the center of the light source A more natural appearance can be created by placing the center of the light source outside the image.
3.
3. Recording Modes Taking a picture with a blurred background (Defocus Control) 1 Press the rear dial to display the setting screen. • Each press of the rear dial switches among brightness 2 Rotate the rear dial to set. • If you press [MENU/SET], you can return to the recording setting, Defocus Control and end operation. screen. • Pressing [ ] on the blurriness setting screen will SS F 500 250 125 60 30 4.0 5.6 8.0 cancel the setting.
3. Recording Modes Recording motion pictures with manually set aperture value/shutter speed (Creative Video Mode) Recording Mode: It is possible to manually change the aperture and shutter speed and record motion pictures. 1 2 Set the mode dial to [ ]. Select the menu. (P54) MENU > [Motion Picture] > [Exposure Mode] > [P]/[A]/[S]/[M] • The operation for changing the aperture value or shutter speed is the same as the operation for setting the mode dial to , , or .
3. Recording Modes Minimizing operational sounds during motion picture recording The operational sound of the zoom or button operation may be recorded when it is operated during the recording of a motion picture. Using touch icons allows silent operation while recording motion pictures. 1 2 3 Start recording. Touch [ ]. Touch icon.
3. Recording Modes Registering your preferred settings (Custom Mode) Recording Mode: Registering Personal Menu Settings (Registering custom settings) Up to 3 sets of current camera settings can be registered using [Cust.Set Mem.]. ( , , ) • Initial setting of the Program AE Mode is registered as the custom settings initially. Preparations: Set in advance the Recording Mode you wish to save and select the desired menu settings on the camera. Select the menu. (P54) MENU > [Custom] > [Cust.Set Mem.
3. Recording Modes Recording using registered custom set You can easily call up the settings you have registered using [Cust.Set Mem.]. Set the mode dial to [ ]. • The custom set you used last time will be called up. ∫ To change a custom set 1 2 3 Set the mode dial to [ ]. Press [MENU/SET] to display the menu. Press 2/1 to select the custom setting you want to use, and then press [MENU/ SET]. It is also possible to display the selection screen by touching the Recording Mode icon in recording screen.
4. Focus, Brightness (Exposure) and Color tone Settings Adjusting Focus Automatically By setting the optimum Focus Mode or Auto Focus Mode for the subject or recording condition, you can let the camera automatically adjust focus in various scenes. 1 Set the [Focus Mode] to [AFS], [AFF] or [AFC]. • The Focus Mode will be set. (P95) 2 3 Press 2 ( ). Press 2/1 to select AF Mode and then press [MENU/SET]. • The Auto Focus Mode will be set. (P97) 4 A Press the shutter button halfway.
4. Focus, Brightness (Exposure) and Color tone Settings • If you zoom in/out after focusing on a subject, the focus may lose its accuracy. In that case, re-adjust the focus. • When the Focus Mode is set to [AFF] or [AFC]. – A beep will be emitted when focus is first achieved during the pressing halfway. – If AF Mode is set to [Custom Multi], such as [ ] or [ ], the AF area is displayed for a moment only when focus is achieved for the first time by pressing the shutter button halfway.
4. Focus, Brightness (Exposure) and Color tone Settings Focus Mode (AFS/AFF/AFC) Applicable modes: The method for achieving focus when the shutter button is pressed halfway is set. MENU > [Rec] > [Focus Mode] Item [AFS] (Auto Focus Single) Scene (recommended) Subject is still (Scenery, anniversary photograph, etc.) “AFS” is an abbreviation of “Auto Focus Single”. Focus is set automatically when the shutter button is pressed halfway. Focus will be fixed while it is pressed halfway.
4. Focus, Brightness (Exposure) and Color tone Settings When recording using [AFF], [AFC] • It may take time to focus on the subject when you operate the zoom from Wide to Tele or suddenly change the subject from a distant one to a nearby one. • Press the shutter button halfway again when it is difficult to focus on the subject. • While the shutter button is pressed halfway, shake may be seen on the screen. • [AFF] and [AFC] are not available in the following situations.
4. Focus, Brightness (Exposure) and Color tone Settings Auto Focus Mode Applicable modes: This allows the focusing method that suits the positions and number of the subjects to be selected. ([Face/Eye Detection]) ([Tracking]) ([49-Area]) , etc. ([Custom Multi]) ([1-Area]) ([Pinpoint]) The camera automatically detects the person’s face and eyes. An eye closer to the camera will be in focus, while the exposure will be optimized for the face.
4. Focus, Brightness (Exposure) and Color tone Settings Pressing the shutter button halfway to adjust the composition When the subject is not in the center of the composition in [Ø], you can bring the subject into the AF area, fix the focus and exposure by pressing the shutter button halfway, move the camera to the composition you want with the shutter button pressed halfway, and then take the picture. (Only when the focus mode is set to [AFS].
4. Focus, Brightness (Exposure) and Color tone Settings About [š] ([Face/Eye Detection]) When the camera detects a face, the AF area and the mark indicating the eye to be in focus are displayed. A The eye to be in focus Yellow: When the shutter button is pressed halfway, the frame turns green when the camera is focused. White: A Displayed when more than one face is detected. Other faces that are the same distance away as faces within the yellow AF areas are also focused.
4. Focus, Brightness (Exposure) and Color tone Settings Setting the shape of the AF area ([Custom Multi]) Selecting from 49 AF areas, you can freely set the optimum shape of the AF area for the subject. 1 2 3 Press 2 ( ). Select a Custom Multi icon ([ ], etc.), and press 3. Press 2/1 to select a setting.
4. Focus, Brightness (Exposure) and Color tone Settings When selecting [ ]/[ ]/[ ] Button operation Touch operation 3/4/2/1 Touching / Pinching in/out [DISP.] [Reset] When selecting [ ヤヒ ]/[ ヤビ ]/[ ヤピ Description of operation Moves the position Changes the size (3 levels) Restores the default setting ] Touch operation Drag your finger over the parts you want to set as AF areas. • If you touch one of the selected AF areas, the selection of the area will be canceled.
4. Focus, Brightness (Exposure) and Color tone Settings Setting up position of the AF area/changing size of the AF area Applicable modes: When [š], [ ], [Ø], or [ ] in Auto Focus Mode is selected, you can change the position and size of the AF area. • Perform the operation after canceling the touch shutter function. • You can also display the AF area setting screen by touching the recording screen.
4. Focus, Brightness (Exposure) and Color tone Settings When selecting [ ] You can set the focus position by selecting the group of AF areas. The 49 AF areas are divided into groups, each consisting of 9 areas (on the edge of the screen, 6 or 4 areas). 1 2 3 4 Examples of group Press 2 ( ). Select [ ] and press 4. • AF area setting screen is displayed. Press 3/4/2/1 to select an AF area group. Press [MENU/SET] to set. • Only [i] display (center point of selected group) will remain on the screen.
4. Focus, Brightness (Exposure) and Color tone Settings Setting the AF area position with the Touch Pad Applicable modes: You can move the AF area displayed on the viewfinder by touching the monitor. MENU > [EXACT] [OFFSET] [Custom] > [Touch Settings] > [Touch Pad AF] Moves the AF area of the Viewfinder by touching a desired position on the Touch Pad. Moves the AF area of the viewfinder according to the distance you drag the touch pad (P51).
4. Focus, Brightness (Exposure) and Color tone Settings Optimizing the focus and brightness for a touched position Applicable modes: You can optimize the focus and brightness for the position you have touched. 1 Select the menu. (P54) MENU 2 > [Custom] > [Touch Settings] > [Touch AF] > [AF+AE] Touch the subject you want to optimize the brightness for. • AF area setting screen is displayed. (P102) • The brightness optimization position is displayed on the ュリヴヱハ 5HVHW center of the AF area.
4. Focus, Brightness (Exposure) and Color tone Settings Adjusting Focus Manually Applicable modes: Use this function when you want to fix the focus or when the distance between the lens and the subject is determined and you do not want to activate Auto Focus. 1 Select the menu. (P54) MENU 2 3 > Press 2 ( [Rec] > [Focus Mode]> [MF] ). Press 3/4/2/1 to adjust the focus position, and press [MENU/SET]. • The assist screen is displayed, enlarging the area.
4. Focus, Brightness (Exposure) and Color tone Settings When using an interchangeable lens (H-FS35100/H-H020A/H-FS14140) with a focus ring Rotate to A side: Focuses on nearby A subject B Rotate to B side: Focuses on distant subjects When using the interchangeable lens having a focus lever Move to C side: Focuses on nearby C subject Move to D side: Focuses on distant D subjects • The focusing speed varies depending on how far you move the focus lever.
4. Focus, Brightness (Exposure) and Color tone Settings 5 Press the shutter button halfway. • The assist screen will close. The recording screen will be displayed. • You can also close the assist screen by pressing [MENU/SET]. • If you have enlarged the picture by rotating the focus ring or moving the focus lever, the assist screen will close approximately 10 seconds after the operation.
4. Focus, Brightness (Exposure) and Color tone Settings Fixing the Focus and the Exposure (AF/AE Lock) Applicable modes: This is useful when you want to take a picture of a subject outside the AF area or the contrast is too strong and you cannot achieve appropriate exposure. 1 2 Align the screen with the subject. Press and hold [AF/AE LOCK] to fix the focus or exposure. • If you release [AF/AE LOCK], AF/AE Lock is canceled. • Only the exposure is locked in the default setting.
4. Focus, Brightness (Exposure) and Color tone Settings Compensating the Exposure Applicable modes: Use this function when you cannot achieve appropriate exposure due to the difference in brightness between the subject and the background. 1 2 Press the rear dial to switch to Exposure Compensation operation. Rotate the rear dial to compensate the exposure. A Exposure Bracket B Exposure Compensation C [Flash Adjust.
4. Focus, Brightness (Exposure) and Color tone Settings • You can set the exposure compensation value in the range between j5 EV and i5 EV. Settings can be made within a range of j3 EV to i3 EV while recording motion pictures, recording 4K photos, or recording in [Post Focus]. • When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of the flash will automatically be set to the level appropriate to the selected Exposure Compensation.
4. Focus, Brightness (Exposure) and Color tone Settings Setting the Light Sensitivity Applicable modes: This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure enables pictures to be taken even in dark places without the resulting pictures coming out dark. 1 2 Press 3 ( ). A Select the ISO sensitivity by rotating the rear dial. ISO LIMIT OFF • You can switch the functions between the rear dial and the front dial by pressing [DISP.].
4. Focus, Brightness (Exposure) and Color tone Settings AUTO The ISO sensitivity is automatically adjusted according to the brightness. • Maximum [ISO3200] (With the flash on [ISO1600])¢1 The camera detects movement of the subject and then automatically sets the optimum ISO sensitivity and shutter speed to suit the movement of the subject and brightness of the scene to minimize the jitter of the subject.
4. Focus, Brightness (Exposure) and Color tone Settings Adjusting the White Balance Applicable modes: In sunlight, under incandescent lights or in other such conditions where the color of white takes on a reddish or bluish tinge, this item adjusts to the color of white which is closest to what is seen by the eye in accordance with the light source. 1 2 Press 1 ( ). Rotate the rear dial or front dial to select the White Balance.
4. Focus, Brightness (Exposure) and Color tone Settings You can set the color temperature manually for taking natural pictures in different lighting conditions. [ 3 ] 6500K 1 Press 3. 2 Press 3/4 to select the color temperature and then press [MENU/SET]. • You can set a color temperature from [2500K] to [10000K]. Press the rear dial to set. Under fluorescent lighting, LED lighting fixture etc.
4. Focus, Brightness (Exposure) and Color tone Settings Finely adjusting the White Balance You can finely adjust the White Balance when you cannot acquire the desired hue by setting the White Balance. 1 2 3 Select the White Balance and then press 4. Press 3/4/2/1 to fine-adjust the White Balance. 2 : A (AMBER: ORANGE) 1 : B (BLUE: BLUISH) 3 : G (GREEN: GREENISH) 4 : M (MAGENTA: REDDISH) • You can also make fine adjustments by touching the White Balance graph. • Pressing [DISP.
4. Focus, Brightness (Exposure) and Color tone Settings White Balance Bracket Bracket setting is performed based on the adjustment values for the White Balance fine adjustment, and 3 pictures with different colors are automatically recorded when the shutter button is pressed once. 1 2 Fine-adjust the White Balance in step 2 of “Finely adjusting the White Balance” and then perform the bracket setting by rotating the rear dial.
5. 4K Photo and Drive Settings Recording 4K Photos Applicable modes: You can select the desired moment from a burst of pictures taken at 30 frames/second and save that moment as a picture of 8 million pixels (approx.). 1 Record a 4K photo. 2 Select and save pictures. 3 The picture is complete. • Use a UHS Speed Class 3 card to record 4K photos. (P28) • When recording 4K photos, the angle of view is narrower. 1 Press [ ].
5. 4K Photo and Drive Settings For capturing the best shot of a fast-moving subject (e.g., sports, aeroplanes, trains) [ ] [4K Burst]¢1 Burst recording is performed while the shutter button is pressed and held. The shutter sound will be heard repeatedly. A Press and hold B Recording is performed Audio recording: Not available [ ] [4K Burst(S/S)]¢1 “S/S” is an abbreviation of “Start/Stop”. For capturing unpredictable photo opportunities (e.g.
5. 4K Photo and Drive Settings 3 Press the shutter button to perform recording. Recording with [ ] ([4K Burst]) (P121) Recording with [ ] ([4K Burst(S/S)]) (P121) Recording with [ ] ([4K Pre-Burst]) (P122) • The camera will perform burst recording of a 4K photo and saves it as a 4K burst file in MP4 format. • When [Auto Review] is enabled, the picture selection screen will be displayed automatically. To continue recording, press the shutter button halfway to display the recording screen.
5. 4K Photo and Drive Settings Recording with [4K Burst] 1 Select [ ] ([4K Burst]). (P118) 60p A Available recording time 2 3 4:3 4K AFS Press the shutter button halfway. Press and hold the shutter button fully for as long as you want to perform recording. • Press the button fully slightly in advance. Recording starts 0 R5m04s approximately 0.5 seconds after it has been pressed fully. A • A 4K burst file will be recorded while the shutter button is pressed and held.
5. 4K Photo and Drive Settings ∫ Setting Loop Recording The camera performs recording while deleting the data of the preceding part so that you can continue recording while waiting for a photo opportunity, without replacing the card. • Once you start recording, the 4K burst file will be recorded and divided approximately every 2 minutes. Approximately the last 10 minutes (up to approximately 12 minutes) will be saved. The preceding part will be deleted. Select the menu.
5. 4K Photo and Drive Settings Notes on the 4K Photo function ∫ To change the aspect ratio Selecting [Aspect Ratio] in the [Rec] menu allows you to change the aspect ratio for 4K photos. ∫ To record the subject with reduced blur You can reduce the blur of the subject by setting a faster shutter speed. 1 2 Set the mode dial to [ ]. Set the shutter speed by rotating the rear dial or the front dial. • Approximate shutter speed for outdoor recording in fine weather conditions: 1/1000 seconds or faster.
5. 4K Photo and Drive Settings ∫ Limitations on the 4K Photo function To optimize settings for 4K photo recording, certain limitations apply to some recording functions, menu items and other settings.
5. 4K Photo and Drive Settings • The following menu items are disabled: Applicable to [ [Custom] [Setup] ] ([4K Burst(S/S)])/[ ] ([4K Pre-Burst]) [Picture Size]/[Quality]/[Bracket]/[iHandheld Night Shot]/[iHDR]/[HDR]/ [Panorama Settings]/[Shutter Type]/[Shutter Delay]/[Flash]/[Extended ISO]/ [Long Shtr NR]/[Shading Comp.]/[Ex. Tele Conv.]/[Color Space]/[Face Recog.
5. 4K Photo and Drive Settings Selecting pictures from 4K burst file and saving This section describes how to select pictures from a 4K burst file and save them. For information on how to record 4K burst files, refer to P118. • The picture will be saved in JPEG format. • The picture will be saved with recording information (Exif information), including its shutter speed, aperture and ISO sensitivity information.
5. 4K Photo and Drive Settings Button operation Touch operation 2/1 Dragging Description of operation Selects a frame • You can select a frame from 60 frames (continuous burst time of approximately 2 seconds). Displays the previous or next frames in slide view • The previous or next 45 frames (burst time of Select / > [MENU/SET] approximately 1.5 seconds) will replace 45 of the frames that are currently displayed in slide view.
5. 4K Photo and Drive Settings <4K burst playback screen> Fn3 Fn1 Fn1 During pause Button operation During continuous playback Touch operation Description of operation 3 Continuous playback 4 Continuous rewind • Frames are rewound in approximately 0.5 second intervals at a faster speed than that of continuous playback.
5. 4K Photo and Drive Settings 4K burst files recorded with [ 1 ] ([4K Pre-Burst]) Select a 4K burst file on the playback screen, and press 3. ]. • 4K burst files are displayed with [ • You can also perform the same operation by touching the icon [ ]. • The slide view screen for selecting pictures will be 2 displayed. Drag the frames to select the frame you want to save as a picture. • You can also perform the same operation by pressing 2/1.
5. 4K Photo and Drive Settings ∫ Selecting and saving pictures on the TV screen Preparation: Set [HDMI Mode (Play)] (P224) to [AUTO] or [4K]. • When connecting to a TV that does not support 4K motion picture, select [AUTO]. Connect the camera and a TV with an HDMI micro cable, and display the playback screen. (P292) • To select and save pictures when the camera is connected to a TV with an HDMI micro cable, set [VIERA Link] in [TV Connection] to [OFF].
5. 4K Photo and Drive Settings Selecting a focus point after recording ([Post Focus]) Applicable modes: The camera can perform Burst recording in the same picture quality as 4K photo recording while automatically shifting the focus to different areas. After the recording, you can select the desired area on the screen and save a picture in which the selected area is in focus. This function is suited for recording still objects. 4K burst recording while automatically shifting the focus.
5. 4K Photo and Drive Settings ∫ To cancel [Post Focus] Select [OFF] in step 2 on P131. About camera temperature • If the surrounding temperature is high, or [Post Focus] recording is performed continuously, or the temperature of the camera rises, [ ] may be displayed and recording may be stopped halfway through to protect the camera. Wait until the camera cools down.
5. 4K Photo and Drive Settings Selecting the desired focus area and saving a picture 1 Select an image with the [ ] icon on the playback screen, and press 3. ]. • You can also perform the same operation by touching the icon [ 2 Select and touch a focus area. • A picture in which the selected area is in focus will be displayed. • If a picture that is in focus is not available for the selected area, a red frame will be displayed. You cannot save a picture in this case.
5. 4K Photo and Drive Settings Select a Drive Mode Applicable modes: You can change what the camera will do when you press the shutter button. 1 2 Press 4 ( ). Press 2/1 to select the drive mode, and then press [MENU/SET]. 1 2 3 4 H A Drive mode A 3 1 [Single] When the shutter button is pressed, only one picture is recorded. 2 [Burst] (P135) Recordings are made in succession while the shutter button is pressed. 3 [4K PHOTO] (P118) When the shutter button is pressed, a 4K photo is recorded.
5. 4K Photo and Drive Settings Burst Mode ∫ Setting the burst rate After pressing 3 in step 2 on P134, press 2/1 to select the burst rate, and press [MENU/SET]. [SH] [H] (Super high (High speed) speed) SH H LV M LV L [M] (Middle speed) [L] (Low speed) Mechanical Burst speed shutter (pictures/ second) Electronic Shutter — 8 (AFS) 6 (AFC) 6 2 40 10 (AFS) 6 (AFC) 6 2 Live View during Burst Mode None None Available Available ¢1 With RAW files — 40 or more¢2 Without RAW files Max.
5. 4K Photo and Drive Settings Focusing in Burst Mode The way focus is achieved varies according to the focus mode (P95) setting and the [Focus/Release Priority] (P212) setting in the [Custom] menu. Focus mode [AFS] [AFF]/[AFC]¢1 [MF] [Focus/Release Priority] Focus [FOCUS] At the first picture [RELEASE] [FOCUS] Normal focusing¢2 [RELEASE] Predicted focusing¢3 — Focus set with Manual Focus ¢1 When the subject is dark or the burst speed is set to [SH], the focus is fixed on the first picture.
5. 4K Photo and Drive Settings Self-timer ∫ Setting the self-timer After pressing 3 in step 2 on P134, press 2/1 to select the time, and press [MENU/SET]. Picture is taken 10 seconds after shutter is pressed. After 10 seconds the camera takes 3 pictures at about 2 seconds intervals. Picture is taken 2 seconds after shutter is pressed. • When using a tripod, etc., this setting is a convenient way to avoid the jitter caused by pressing the shutter button.
5. 4K Photo and Drive Settings Taking Pictures While Adjusting a Setting Automatically (Bracket Recording) Applicable modes: You can take multiple pictures while automatically adjusting a setting by pressing the shutter button. 1 Select the menu. (P54) MENU > [Rec] > [Bracket]> [Bracket Type] (Exposure Bracket) (Aperture Bracket)¢ (Focus Bracket) (White Balance Bracket) Press the shutter button to perform recording while adjusting the exposure.
5. 4K Photo and Drive Settings Not available in these cases: • Bracket recording is disabled in the following cases.
5. 4K Photo and Drive Settings Aperture Bracket Recording Mode: ∫ About [More settings] (step 2 in P138) [3], [5]: Takes a specified number of pictures with different aperture values within the range based on the initial aperture value. [ALL]: Takes pictures using all aperture values. [Image Count] • When using burst recording, if you press and hold the shutter button, recording will be performed until a specified number of pictures are taken. The available aperture values vary depending on the lens.
5. 4K Photo and Drive Settings Taking Pictures Automatically at Set Intervals ([Time Lapse Shot]) Applicable modes: The camera can automatically take pictures of subjects such as animals or plants as time elapses and create a motion picture. • Set the date and time settings in advance. (P35) • Pictures taken with Time Lapse Shot are displayed as a set of group pictures. (P184) 1 Select the menu. (P54) MENU > [Rec] > [Time Lapse Shot] [Now] Starts the recording by fully-pressing the shutter button.
5. 4K Photo and Drive Settings 4 Select the methods for creating a motion picture. • The recording format is set to [MP4]. [Rec Quality] Sets the quality of a motion picture. [Frame Rate] Sets the number of frames per second. The larger the number is, the smoother the motion picture will be. [Sequence] 5 [NORMAL]: Splices pictures together in recording order. [REVERSE]: Splices pictures together in reverse recording order. Select [OK] with 3/4, and then press [MENU/SET].
5. 4K Photo and Drive Settings Creating Stop Motion Pictures ([Stop Motion Animation]) Applicable modes: A stop motion picture is created by splicing pictures together. • Set the date and time settings in advance. (P35) • Pictures taken with [Stop Motion Animation] are displayed as a set of group pictures. (P184) 1 Select the menu. (P54) MENU > [Rec] > [Stop Motion Animation] [Auto Shooting] [ON] Takes pictures automatically at a set recording interval.
5. 4K Photo and Drive Settings 6 7 Touch [ ] to end the recording. • It can also be ended by selecting [Stop Motion Animation] from the [Rec] menu and then pressing [MENU/SET]. • When [Auto Shooting] is set to [ON], select [End] on the confirmation screen. (If [Pause] has been selected, press the shutter button fully to resume the recording.) Select the methods for creating a motion picture. • The recording format is set to [MP4]. [Rec Quality] Sets the quality of a motion picture.
5. 4K Photo and Drive Settings • Automatic recording may not take place at set intervals because recording takes time under certain recording conditions, such as when the flash is used for recording. • When creating motion pictures with a [Rec Quality] setting of [4K/30p] or [4K/24p], recording times are limited to 29 minutes and 59 seconds. – When using an SDHC Memory Card, you cannot create motion pictures with a file size exceeding 4 GB.
6. Stabilizer, Zoom and Flash Image Stabilizer The camera can activate either the In-Lens Image Stabilizer or In-Body Image Stabilizer, or it can activate both of them and reduce jitter even more effectively. (Dual I.S.) For motion picture recording, you can use the 5-Axis Hybrid Image Stabilizer, which makes use of the In-Lens Image Stabilizer, In-Body Image Stabilizer, and Electronic Image Stabilizer. • The image stabilizers to be activated differ depending on your lens.
6. Stabilizer, Zoom and Flash Preventing jitter (camera shake) When the jitter alert [ ] appears, use [Stabilizer], a tripod or the self-timer (P137). • Shutter speed will be slower particularly in the following cases. Keep the camera still from the moment the shutter button is pressed until the picture appears on the screen. We recommend using a tripod. – Slow Sync. – Slow Sync.
6. Stabilizer, Zoom and Flash Setting the focal length of a lens 1 Select the menu. (P54) MENU > [Rec] > [Stabilizer] > [Focal Length Set] 2 Select the focal length of your lens with 2/1. • A focal length ranging from 8 mm to 1000 mm can be set. • If the focal length setting for your lens is not found, select a 3 Press [MENU/SET]. value close to the focal length of your lens. ∫ Registering a focal length 1 Perform step 2 in “Setting the focal length of a lens”. 2 Press 4.
6. Stabilizer, Zoom and Flash • The Image Stabilizer may produce operational sound or cause vibration during its operation, but these are not malfunctions. • It is recommended to disable the Image Stabilizer when using a tripod. • The stabilizer function may not be effective in the following cases. Be careful of camera jitter when you press the shutter button.
6. Stabilizer, Zoom and Flash Taking Pictures with the Zoom Optical zoom Applicable modes: You can zoom-in to make people and objects appear closer or zoom-out to record landscapes, etc. T side: Enlarges distant subject W side: Widens angle of view Interchangeable lens with a zoom ring (H-FS12032/ H-FS35100/ H-FS14140) Interchangeable lens that supports the power zoom (electrically operated zoom) Interchangeable lens that does not support the zoom (H-H020A) Rotate the zoom ring.
6. Stabilizer, Zoom and Flash Raising the telescopic effect [Ex. Tele Conv.] Applicable modes: Extended Tele Conversion enables you to take pictures that are further enlarged without deteriorating the picture quality. When taking pictures [Ex. Tele Conv.] ([Rec]) 1.2k: [ 1.4k: [ 2.0k: [ • Set the picture size to [M]or [S] (picture sizes indicated with M] ([16:9]) M] ([4:3]/[3:2]/[1:1]) S] ([4:3]/[3:2]/[16:9]/[1:1]) ), and set the quality to [A] or [›]. When recording motion pictures [Ex. Tele Conv.
6. Stabilizer, Zoom and Flash ∫ Increasing the zoom magnification in steps • This can be used only when recording pictures. 1 Select the menu. (P54) 2 3 4 Set a function button to [Zoom Control]. (P58) Press the function button. Press 2/1 or 3/4. > MENU [Rec] > [Ex. Tele Conv.] > [ZOOM] 3/1: Tele (Enlarges distant subject) 4/2: Wide (Widens angle of view) • The zoom operation is terminated when the function button is pressed again or a certain amount of time passes. 4:3 4:3 EX1.0x EX2.
6. Stabilizer, Zoom and Flash • If you assign [Ex. Tele Conv.] to [Fn Button Set] (P58) in the [Custom] menu, you can display the Extended Tele Conversion setting screen for both pictures and motion pictures by pressing the assigned function button. While this screen is displayed, you can change the [Picture Size] setting by pressing [DISP.].
6. Stabilizer, Zoom and Flash Changing the settings for a power zoom lens Applicable modes: Sets the screen display and lens operations when using an interchangeable lens that is compatible with power zoom (electrically operated zoom). • This may only be selected when using a lens that is compatible with power zoom (electrically operated zoom). MENU > [Custom] > [Power Zoom Lens] [Disp Focal Length] When you zoom, the focal distance is displayed and you can confirm the zoom position.
6. Stabilizer, Zoom and Flash Zooming using touch operations (Touch zoom) (Optical Zoom and Extended Tele Conversion for still picture recording are operable) • If you are using an interchangeable lens not supporting power zoom (H-FS12032/H-FS35100/ H-H020A/H-FS14140), you can only operate Extended Tele Conversion for pictures by setting [Ex. Tele Conv.] (P151) to [ZOOM]. 1 2 Touch [ ]. Touch [ ]. • The slide bar is displayed. AE 3 Perform zoom operations by dragging the slide bar.
6. Stabilizer, Zoom and Flash Taking pictures by using the flash Applicable modes: ∫ Open/Close the built-in flash Taking a picture using the flash becomes possible by opening the built-in flash. A To open the flash Press the flash open button. B To close the flash Press the flash until it clicks. • Forcibly closing the flash can damage the camera. • Be sure to close the built-in flash when not in use. • The flash setting is fixed to [Œ] while the flash is closed.
6. Stabilizer, Zoom and Flash ∫ The available flash range (approximation) When you use certain lenses, light from the flash may be blocked or fail to cover the lens field of view, causing dark areas to appear in the resulting pictures. The distance at which light from the flash is blocked by lens, and the distance to which light from the flash is delivered vary depending on the lens used. Check the distance to the subject when taking a picture.
6. Stabilizer, Zoom and Flash Setting the Flash Functions Changing the firing mode Applicable modes: Select whether to set the flash output automatically or manually. 1 Select the menu. (P54) MENU > [TTL] [MANUAL] 2 The camera automatically sets the flash output. Set the luminosity ratio of the flash manually. In [TTL] you can shoot the photograph you want even when shooting dark scenes that may otherwise be too brightly lit by the flash. • When [MANUAL] is set, the luminosity ratio ([1/1], etc.
6. Stabilizer, Zoom and Flash Changing Flash Mode Applicable modes: Set the flash to match the recording. Select the menu. (P54) MENU ‰ > [Rec] > [Flash] > [Flash Mode] The flash is activated every time regardless of the recording conditions. ([Forced Flash On]) • Use this when your subject is back-lit ([Forced On/ or under fluorescent light. ¢ Red-Eye]) Œ When taking pictures against a dark background landscape, this feature will slow the shutter speed when the flash is activated.
6. Stabilizer, Zoom and Flash ∫ Available flash settings by Recording Mode The available flash settings depend on the Recording Mode.
6. Stabilizer, Zoom and Flash ∫ Shutter speed for each flash setting Flash setting Shutter speed (Sec.) ‰ Flash setting 1/60th¢ to 1/160th Shutter speed (Sec.) 1 to 1/4000th ¢ This becomes 60 seconds in Shutter-Priority AE Mode and T (Time) in the Manual Exposure Mode. • When the flash is activated the fastest shutter speed that can be selected is 1/160th of a second. • In Intelligent Auto ( or ) Mode, shutter speed changes depending on the identified scene.
6. Stabilizer, Zoom and Flash Adjust the flash output Applicable modes: Adjust the flash brightness when pictures taken with the flash are over or underexposed. 1 Select the menu. (P54) MENU 2 > [Rec] > [Flash] > [Flash Adjust.] Press 2/1 to set the flash output and then press [MENU/SET]. • You can adjust from [j3 EV] to [i3 EV] in steps of 1/3 EV. • Select [n0] to return to the original flash output. • [i] or [j] is displayed on the flash icon in the screen when the flash level is adjusted.
6. Stabilizer, Zoom and Flash Taking Pictures with Wireless Flashes Applicable modes: By using flashes that support the wireless control (DMW-FL200L, DMW-FL360L, DMW-FL580L: optional), you can control firing of the flash attached to the hot shoe of this unit and three flash groups separately. • When an built-in flash is being used, you cannot control the firing of wireless flashes. ∫ Placing wireless flashes Place the wireless flash with its wireless sensor facing toward the camera.
6. Stabilizer, Zoom and Flash 2 Select the menu. (P54) MENU > [Rec] > [Flash] [Wireless] Select [ON]. [Wireless Channel] [Wireless Setup] 3 Select the channel you have set for the wireless flashes in step 1. Proceed to step 3. Press 3/4 to select an item and then press [MENU/SET]. • Press [DISP.] to fire a test-flash. A Firing Mode B Flash output C Luminosity ratio A B C [Firing Mode] [External Flash]¢1 [TTL]: The camera automatically sets the output.
6. Stabilizer, Zoom and Flash Using other settings for wireless flash recording Enabling FP firing for the wireless flashes During wireless recording, an external flash fires an FP flash (high speed repetition of flash firing). This firing allows recording with the flash at a fast shutter speed. Select the menu. (P54) MENU > [Rec] > [Flash] > [Wireless FP] Settings: [ON]/[OFF] Setting the output of communication light Select the menu.
7. Recording Motion Pictures Recording Motion Picture/4K Motion Picture Applicable modes: This camera can record full high definition motion pictures compatible with the AVCHD format or motion pictures recorded in MP4. In addition, the camera can record 4K motion pictures in MP4. (P168) Audio will be recorded in stereo. 1 Start recording by pressing the motion picture button. A Elapsed recording time B Available recording time • Recording of motion picture appropriate for each mode is possible.
7. Recording Motion Pictures • When the ambient temperature is high or motion picture is recorded continuously, the camera may display [ ] and stop the recording to protect itself. Wait until the camera cools down. • The operational sound of the zoom or button operation may be recorded when it is operated during the recording of a motion picture. • Depending on the type of the card, the card access indication may appear for a while after recording motion pictures. This is not a malfunction.
7. Recording Motion Pictures Setting the format, size and recording frame rate 1 Select the menu. (P54) MENU > [Motion Picture] > [Rec Format] This data format is suitable for when playing back on a high-definition TV, etc. [AVCHD] [MP4] 2 This data format is suitable for when playing back on a PC, etc. Press 3/4 to select [Rec Quality] and then press [MENU/SET].
7. Recording Motion Pictures • The higher the “Bit rate” value is, the higher the picture quality becomes. Since the camera employs the “VBR” recording method, the bit rate is changed automatically depending on the subject to record. As a result, the recording time is shortened when a fast-moving subject is recorded. • When recording motion pictures in 4K, use a card rated as UHS Speed Class 3. (P28) • The angle of view of motion pictures in 4K is narrower than those of motion pictures in other sizes.
7. Recording Motion Pictures How to set focus when recording a motion picture ([Continuous AF]) Applicable modes: Focusing changes depending on the Focus Mode setting (P95) and the [Continuous AF] setting in the [Motion Picture] menu. Focus mode [AFS]/[AFF]/ [AFC] [MF] [Continuous AF] Description of settings [ON] The camera automatically keeps focusing on subjects during recording. [OFF] The camera maintains the focus position at the start of recording. [ON]/[OFF] You can focus manually.
7. Recording Motion Pictures Recording Motion Pictures that Pan and Zoom While Maintaining a Fixed Camera Position ([4K Live Cropping]) Recording Mode: By cropping your motion picture down from the 4K angle of view to Full High Definition, you can record a motion picture that pans and zooms in/out while leaving the camera in a fixed position. • Hold the camera firmly in place while recording. • A motion picture will be recorded at [FHD/20M/30p] under [MP4].
7. Recording Motion Pictures 3 A Set the cropping start frame. A Cropping start frame • When making settings for the first time, a cropping start frame of size 1920k1080 is displayed. (After setting the cropping start frame and end frame, the start frame and end frame that you set immediately before will be displayed.) • The camera will remember the frame position and size even when the camera is turned off.
7. Recording Motion Pictures 5 Press the motion picture button (or shutter button) to start recording. A Elapsed recording time B Set operating time • Immediately release the motion picture button (or the shutter button) after pressing it. • When the set operating time has elapsed, recording automatically ends. To end recording midway, press the motion picture button (or the shutter button) again.
7. Recording Motion Pictures Recording still pictures while recording motion pictures Applicable modes: You can record still pictures while recording a motion picture. (Simultaneous recording) During motion picture recording, press the shutter button fully to record a still picture. • Simultaneous recording indicator is displayed while recording still pictures. • Recording with the Touch Shutter function (P52) is also 13 available.
7. Recording Motion Pictures • The picture aspect ratio will be fixed to [16:9]. Not available in these cases: • This function is not available in the following cases: – When [Rec Quality] is set to [VGA/4M/30p] for MP4 motion pictures – When [Rec Quality] is set to [4K/100M/24p] for MP4 motion picture or [FHD/24M/24p] for AVCHD motion pictures (only when [ ] ([Photo Priority]) is selected) – When the drive mode is set to 4K Photo (only when [ ] ([Photo Priority]) is set) – When using [Ex. Tele Conv.
7. Recording Motion Pictures Recording Snap Movies Applicable modes: You can specify the recording time in advance and record motion pictures casually like you take snapshots. The function also allows you to shift a focus at the start of recording and add fade in/out effects in advance. • Motion pictures will be recorded with [FHD/20M/30p] in [MP4]. • Using the smartphone/tablet app “Panasonic Image App”, you can combine motion pictures recorded with the camera.
7. Recording Motion Pictures ∫ Changing the Snap Movie settings Select the menu. (P54) MENU > [Record time] [Pull Focus] [Fade] [Motion Picture] > [Snap Movie] > [SET] Sets the recording time of motion pictures. Allows dramatic imaging expression by shifting focus gradually at the start of recording. (P178) Adds a fade-in (gradual appearance) effect to an image and audio as recording starts or adds a fade-out (gradual disappearance) effect to them as recording ends.
7. Recording Motion Pictures Setting up [Pull Focus] Set the frames that specify the positions where the [Pull Focus] starts (first position) and stops (second position). Button operation 1 2 3 Press 2. Press 3/4/2/1 to move the AF area frame, and press [MENU/SET]. (First position) • If you press [DISP.] before pressing [MENU/SET], the frame will return to the center. Repeat step 2. (Second position) • If you press [MENU/SET], the frame settings will be canceled.
8. Playing Back and Editing Images Playing Back Pictures 1 Press [(]. 2 Press 2/1. 2: Play back the previous picture 1: Play back the next picture 1/98 • If you press and hold 2/1, you can play back the pictures in succession. • Pictures can also be forwarded or rewound by rotating the front dial or dragging the screen horizontally. (P51) • You can forward or rewind pictures continuously by keeping your finger on the left or right sides of the screen after forwarding/rewinding a picture.
8. Playing Back and Editing Images Playing Back Motion Pictures This unit was designed to play motion pictures using the AVCHD and MP4 formats. • Motion pictures are displayed with the motion picture icon ([ ]). Press 3 to play back. A 12s A Motion picture recording time • After playback starts, the elapsed playback time is displayed on the screen. For example, 8 minutes and 30 seconds is displayed as [8m30s]. • Some information (recording information, etc.
8. Playing Back and Editing Images Creating Still Pictures from a Motion Picture You can save a scene of a motion picture as a picture. 1 Press 3 to pause motion picture playback. • You can finely adjust the location for division by pressing 2/1 while the motion picture is paused. 2 Press [MENU/SET]. • The same operation can be performed by touching [ ]. • Still pictures will be saved with [Aspect Ratio] set to [16:9] and [Quality] set to [›].
8. Playing Back and Editing Images Switching the Playback Method Using the Playback Zoom Rotate the rear dial right. 2.0X 1k 2k 4k 8k 16k • If the rear dial is rotated to the left after the image is enlarged, the magnification will be reduced. • You can also enlarge/reduce the image by pinching out/pinching in (P51) on the part you want to enlarge/reduce. • You can move the enlarged part by pressing 3/4/2/1 or dragging the screen.
8. Playing Back and Editing Images Displaying multiple screens (Multi Playback) Rotate the rear dial left. 1/98 1 screen 12 screens 30 screens Calendar screen display • If the rear dial is rotated to the right, the previous playback screen will be displayed. • It is possible to switch the playback screen by touching the following icons. –[ ]: 1 screen –[ ]: 12 screens –[ ]: 30 screens – [ CAL ]: Calendar screen display • The screen can be switched gradually by dragging the screen up or down.
8. Playing Back and Editing Images Playing Back Group Pictures A picture group consists of multiple pictures. You can play back pictures in a group either continuously or one by one. • You can edit or delete all pictures in a group at once. (For example, if you delete a picture group, all pictures in the group are deleted.) [ ]: A picture group consisting of pictures taken in the Burst Mode with the burst speed [SH]. (P135) [ ]: A picture group consisting of pictures taken with Focus Bracket.
8. Playing Back and Editing Images Playing back group pictures one by one 1 Press 4. • The same operation can be performed by touching [ [ 2 ], [ ], or [ ], ]. 1/98 SLF Press 2/1 to flip through images. ] will return you to the normal playback screen. • Pressing 4 again or touching [ • Each picture in a group can be treated same as normal pictures when they are played back.
8. Playing Back and Editing Images Deleting Pictures Once deleted, pictures cannot be recovered. To delete a single picture 1 In Playback Mode, select the picture to delete and then press [ ]. • The same operation can be performed by touching [ 2 ]. Press 3 to select [Delete Single] and then press [MENU/SET]. 'HOHWH 6LQJOH 'HOHWH 0XOWL 'HOHWH $OO To delete multiple pictures (up to 100¢) or all the pictures ¢ Picture groups are treated as a single picture.
9. Using Menu Functions Menu list [Rec] P187 [Setup] P220 [Motion Picture] P208 [Custom] P210 [Playback] P228 • [Photo Style], [Filter Settings], [Focus Mode], [Metering Mode], [Highlight Shadow], [i.Dynamic], [i.Resolution], [Diffraction Compensation], [Digital Zoom] and [Stabilizer] are common to both the [Rec] menu and [Motion Picture] menu. Changing these settings in one of these menus is reflected in other menu.
9. Using Menu Functions [Photo Style] Applicable modes: You can select effects to match the type of image you wish to record. It is possible to adjust the items such as color or picture quality of the effect to your desire. MENU > [Rec] > [Photo Style] [Standard] [Vivid] ¢ This is the standard setting. Brilliant effect with high saturation and contrast. [Natural]¢ Soft effect with low contrast. [Monochrome] Monochrome effect with no color shades. [L.
9. Using Menu Functions ∫ Adjusting the picture quality • Picture quality cannot be adjusted in the Intelligent Auto Plus 6WDQGDUG -5 0 +5 Mode. 1 2 ±0 S ±0 Press 2/1 to select the type of Photo Style. Press 3/4 to select the items, and then press 2/1 to adjust. [Color Tone]¢1 [s] Decreases the difference between the brightness and the darkness in the picture. [r] The picture is sharply defined. [s] The picture is softly focused. [r] The noise reduction effect is enhanced.
9. Using Menu Functions [Filter Settings] Applicable modes: You can apply image effects (filters) that are available for Creative Control Mode to images in other modes, such as Aperture-Priority AE Mode or Panorama Shot Mode. (P83) MENU > [Rec] > [Filter Settings] > [Filter Effect] Settings: [ON]/[OFF]/[SET] ∫ Change the settings by using the touch screen 1 Touch [ ]. EXPS 2 Touch the item you want to set.
9. Using Menu Functions ∫ Taking a picture with and without an image effect simultaneously ([Simultaneous record w/o filter]) You can press the shutter button once and take two pictures simultaneously, one with an image effect and the other one without it. MENU > [Rec] > [Filter Settings] > [Simultaneous record w/o filter] Settings: [ON]/[OFF] • When this item is set to [ON], a picture with an image effect will be taken first, followed by a picture without it.
9. Using Menu Functions [Aspect Ratio] Applicable modes: This allows you to select the aspect ratio of the pictures to suit printing or the playback method. MENU > [Rec] > [Aspect Ratio] [4:3] [Aspect Ratio] of a 4:3 TV [3:2] [Aspect Ratio] of a 35 mm film camera [16:9] [Aspect Ratio] of a high-definition TV, etc. [1:1] Square aspect ratio [Picture Size] Applicable modes: Set the number of pixels.
9. Using Menu Functions [Quality] Applicable modes: Set the compression rate at which the pictures are to be stored. > MENU [Rec] > [Quality] Settings File format [A] A JPEG image in which image quality was given priority. JPEG [›] [ ] [ ] [ Description of settings ] RAWiJPEG RAW A standard image quality JPEG image. This is useful for increasing the number of shots without changing the number of pixels. You can record a RAW image and a JPEG image ([A] or [›]) simultaneously.
9. Using Menu Functions [Metering Mode] Applicable modes: Type of optical measurement to measure brightness can be changed. MENU > [Rec] > [Metering Mode] [ ] (Multiple) This is the method in which the camera measures the most suitable exposure by judging the allocation of brightness on the whole screen automatically. Usually, we recommend using this method. [ ] (Center weighted) This is the method used to focus on the subject on the center of the screen and measure the whole screen evenly.
9. Using Menu Functions [Highlight Shadow] Applicable modes: You can adjust the brightness of bright and dark portions on an image while checking the brightness on the screen. > MENU ヤヒ 1 2 [Rec] > [Highlight Shadow] (Standard) A state with no adjustments is set. (Raise the contrast) Bright areas are brightened, and dark areas are darkened. (Lower the contrast) Bright areas are darkened, and dark areas are brightened. (Brighten dark areas) Dark areas are brightened.
9. Using Menu Functions [i.Dynamic] Applicable modes: Contrast and exposure are compensated when the brightness difference between the background and subject is great, etc. MENU > [Rec] > [i.Dynamic] Settings: [AUTO]/[HIGH]/[STANDARD]/[LOW]/[OFF] Not available in these cases: • Compensation effect may not be achieved depending on the recording conditions. • This function is not available in the following cases: – When [HDR] is set to [ON] [i.
9. Using Menu Functions [HDR] Applicable modes: You can combine 3 pictures with different levels of exposure into a single picture with rich gradation. You can minimize the loss of gradations in bright areas and dark areas when, for example, the contrast between the background and the subject is large. An image combined by HDR is recorded in JPEG.
9. Using Menu Functions [Multi Exp.] Applicable modes: Gives an effect like multi exposure. (up to 4 times equivalent per a single image) MENU 1 2 > [Rec] > [Multi Exp.] Press 3/4 to select [Start] and then press [MENU/SET]. Decide on the composition, and take the first picture. • After taking the picture, press the shutter button halfway down to take the next picture. • Press 3/4 to select the item and then press [MENU/SET] for one of the following operations.
9. Using Menu Functions [Shutter Type] Applicable modes: You can use either of the two shutters to take pictures: the mechanical shutter or the electronic shutter. Mechanical shutter Electronic Shutter Flash ± — Shutter Speed (Sec.) T (Time)¢1/60 to 1/4000th 1¢2 to 1/16000th Shutter sound Mechanical shutter sound Electronic shutter sound¢3 ¢1 This setting is available only in Manual Exposure Mode. (P73) ¢2 Up to an ISO sensitivity of [ISO3200].
9. Using Menu Functions [Shutter Delay] Applicable modes: To reduce the influence of hand shake or shutter vibration, shutter is released after the specified time has passed.
9. Using Menu Functions [ISO Limit Set] Applicable modes: It will select optimal ISO sensitivity with set value as limit depending on the brightness of the subject. • It will work when the [Sensitivity] is set to [AUTO] or [ ].
9. Using Menu Functions [Long Shtr NR] Applicable modes: The camera automatically removes noise that appears when the shutter speed becomes slower to take pictures of night scenery etc. so you can take beautiful pictures. MENU > [Rec] > [Long Shtr NR] Settings: [ON]/[OFF] • [Long shutter noise reduction ongoing] is displayed for the same time as the shutter speed for signal processing.
9. Using Menu Functions [Diffraction Compensation] Applicable modes: The camera raises the resolution by correcting the blurriness caused by diffraction when the aperture is closed. MENU > [Rec] > [Diffraction Compensation] Settings: [AUTO]/[OFF] • Compensation effect may not be achieved depending on the recording conditions. • Noise may stand out with higher ISO sensitivity.
9. Using Menu Functions [Face Recog.] Applicable modes: Face Recognition is a function which finds a face resembling a registered face and priorities focus and exposure automatically. Even if the person is located towards the back or on the end of a line in a group photo, the camera can still take a clear picture. KEN MENU > KEN [Rec] > [Face Recog.] Settings: [ON]/[OFF]/[MEMORY] • The following functions will also work with the Face Recognition function.
9. Using Menu Functions ∫ Face Settings You can register information such as names and birthdays for face images of up to 6 people. Point of recording when registering the face images • Face front with eyes open and mouth closed, making (Good example for registering) sure the outline of the face, the eyes, or the eyebrows are not covered with hair when registering. • Make sure there is no extreme shading on the face when registering. (Flash will not flash during registration.
9. Using Menu Functions 4 Set the item. • You can register up to 3 face images. [Name] [Age] It is possible to register names. • For information on how to enter characters, refer to P61. It is possible to register the birthday. (Add Images) To add additional face images. [Add Images] 1 Select the unregistered face recognition frame, and then press [MENU/SET]. 2 Perform step 3 in “Face Settings”. (Delete) To delete one of the face images.
9. Using Menu Functions [Profile Setup] Applicable modes: If you set the name and birthday of your baby or pet in advance, you can record their name and age in months and years in the images. You can display these at playback or stamp the recorded images using [Text Stamp] (P241). JOE MENU > Settings: [ LUCKY [Rec] > [Profile Setup] ] ([Baby1])/[ ] ([Baby2])/[ ] ([Pet])/[OFF]/[SET] ∫ Setting [Age] or [Name] 1 Press 3/4 to select [SET] and then press [MENU/SET].
9. Using Menu Functions [Motion Picture] menu : • [Photo Style] (P188) • [Filter Settings] (P190) • [4K Live Cropping] (P171) • [Snap Movie] (P176) • [Rec Format] (P168) • [Rec Quality] (P168) • [Exposure Mode] (P89) • [Focus Mode] (P95) • [Picture Mode] (P174) • [Continuous AF] (P170) • [Metering Mode] (P194) • [Highlight Shadow] (P195) • [i.Dynamic] (Intelligent dynamic range control) (P196) • [i.Resolution] (P196) • [Diffraction Compensation] (P203) • [Ex. Tele Conv.
9. Using Menu Functions [Wind Noise Canceller] Applicable modes: This will reduce the wind noise coming into the built-in microphone while maintaining sound quality. MENU > [Motion Picture] > [Wind Noise Canceller] Settings: [HIGH]/[STANDARD]/[OFF] • [HIGH] effectively reduces the wind noise by minimizing the low-pitched sound when a strong wind is detected. • [STANDARD] extracts and reduces only the wind noise without deteriorating the sound quality.
9. Using Menu Functions : MENU [Custom] menu > [Custom] [Cust.Set Mem.] Registers the current camera settings as custom set. P91 Disables operational sounds and output of light at once. • Audio from the speaker will be muted and the flash and the AF Assist lamp will be disabled. The following settings are fixed.
9. Using Menu Functions MENU > [Custom] Speeds up the focusing that takes place when you press the shutter button. [Quick AF] [Eye Sensor AF] • The battery will be consumed faster than usual. • This function is not available in the following cases: – In Preview Mode – In low light situations The camera automatically adjusts the focus when the eye sensor is active. s s • [Eye Sensor AF] may not work in dimly lit conditions.
9. Using Menu Functions MENU > [Custom] • The AF Assist Lamp gets slightly blocked when the [AF Assist Lamp] (continued) interchangeable lens (H-FS12032/H-FS35100/H-H020A) is used, but it does not affect the performance. • The AF Assist Lamp may be greatly blocked, and it may become harder to focus when a lens with large diameter is used (such as H-FS14140). • The setting is fixed to [OFF] in the following cases.
9. Using Menu Functions MENU > [Custom] Sets the display method of MF Assist (enlarged screen). When an interchangeable lens with no focus ring is used (H-FS12032) [ON]/[OFF] When an interchangeable lens having a focus ring (H-FS35100/H-H020A/H-FS14140) is used [ ]: The screen is enlarged by operating the focus ring or the focus lever of the lens or by pressing 2( ). [MF Assist] [ ]: The screen is enlarged by operating the focus ring or the focus lever of the lens.
9. Using Menu Functions MENU > [Custom] In-focus portions (portions on the screen with clear outlines) are highlighted when focus is being adjusted manually. • When [Detect Level] in [SET] is set to [HIGH], portions to be highlighted are reduced, allowing you to achieve a more precise focus. • Changing the [Detect Level] setting also changes the [Display Color] setting as follows.
9. Using Menu Functions MENU > [Custom] This allows you to set either to display or not display the histogram. You can set the position by pressing 3/4/2/1. • Direct touch operation is also possible from the recording screen. • A histogram is a graph that [Histogram] [Guide Line] displays brightness along the horizontal axis (black to white) and the number of pixels at each brightness level on the vertical axis. It allows you to easily check a picture’s exposure.
9. Using Menu Functions MENU > [Custom] When the Auto Review function is activated or when playing back, white saturated areas appear blinking in black and white. • If there are any white saturated [Highlight] areas, we recommend compensating the exposure towards negative (P110) referring to the histogram (P215) and then taking the picture again. It may result in a better quality picture.
9. Using Menu Functions MENU > [Custom] [Monochrome Live View] You can display the recording screen in black and white. This function is convenient when a black and white screen will make it easier to set focus with Manual Focus. • Even if you use the HDMI output during recording, this s function will not work for the connected device. • Recorded images will not be affected.
9. Using Menu Functions MENU > [Custom] This changes the angle of view during motion picture recording and still picture recording. [Rec Area] • The recording area indicated is an approximation. • [Rec Area] is not available for 4K photo or [Post Focus] s recording. [Remaining Disp.] This will switch display between the number of recordable pictures and available recording time. • [9999i] is displayed if there are 10000 or more pictures s remaining.
9. Using Menu Functions MENU > [Custom] [Eye Sensor] Setting the eye sensor sensitivity and the method for switching between the monitor and viewfinder. P41 Enables/disables the Touch operation. [Touch Screen]: All touch operations. [Touch Tab]: [Touch Settings] Operations of tabs, such as [ ] on the right side of the screen. [Touch AF]: s Operation to bring the subject you touch into focus ([AF]) or adjust the focus and brightness ([AF+AE]).
9. Using Menu Functions : MENU [Setup] menu > [Setup] [Online Manual] [URL display]/[QR Code display] [Clock Set] Setting Date/Time. s P35 Sets the times for the region where you live and your holiday destination. • [Destination] can be set after setting up [Home]. After selecting [Destination] or [Home], press 2/1 to select an area, and press [MENU/SET] to set.
9. Using Menu Functions MENU > [Setup] • You can display the elapsed days and travel destination [Travel Date] (continued) [Wi-Fi] during playback or stamp them on recorded pictures in [Text Stamp] (P241). • The number of days that have passed since the departure date can be printed out using the software “PHOTOfunSTUDIO” (P296). • The travel date is calculated using the date in the clock setting and the departure date you set.
9. Using Menu Functions MENU > [Setup] Brightness, color, or red or blue tint of the Monitor/ viewfinder is adjusted. [Monitor Display]/ [Viewfinder] 1 Select the settings by pressing 3/4, and adjust with 2/1. • Adjusting can also be performed by rotating the rear 2 Press [MENU/SET] to set. dial. s • It will adjust the monitor when the monitor is in use, and the viewfinder when the viewfinder is in use. • Some subjects may appear differently from actuality on the monitor.
9. Using Menu Functions MENU > [Setup] [Sleep Mode]: The camera is automatically turned off if the camera has not been used for the time selected on the setting. [Sleep Mode(Wi-Fi)]: The camera is automatically turned off if it is not connected to a Wi-Fi network and has not been used for 15 minutes (approx.). [Auto LVF/Monitor Off]: The monitor/viewfinder is automatically turned off if the camera has not been used for the time selected on the setting.
9. Using Menu Functions MENU > [Setup] [HDMI Mode (Play)]: Set the format for the HDMI output when playing back on the HDMI compatible high-definition TV connected with this unit using the HDMI micro cable. [TV Connection] [AUTO]: The output resolution is automatically set based on the information from the connected TV. [4K]: The progressive method with 2160 available scan lines and an output resolution of 3840k2160 are used for output.
9. Using Menu Functions MENU > [Setup] [HDMI Info Display (Rec)]: Sets whether or not to display information when you take pictures while monitoring the camera image on a device (TV, etc.) connected with an HDMI micro cable. P293 • When the camera is connected to a TV, lower the volume of the TV. [3D Playback]: Set the output method for 3D pictures. [TV Connection] (continued) [ ]: Set when connecting to a 3D compatible television. [ ]: Set when connecting to a television not compatible with 3D.
9. Using Menu Functions MENU > [Setup] Reset the file number of the next recording to 0001. • The folder number is updated and the file number starts from 0001. • A folder number between 100 and 999 can be assigned. [No.Reset] The folder number should be reset before it reaches 999. We recommend formatting the card (P29) after saving the data on a PC or elsewhere. • To reset the folder number to 100, format the card first and then use this function to reset the file number.
9. Using Menu Functions MENU > [Setup] It will perform optimization of imaging device and image processing. [Pixel Refresh] • Imaging device and image processing is optimized when the camera is purchased. Use this function when bright spots that do not exist in the subject get recorded. • Turn the camera off and on after the pixels are corrected. s Dust reduction to blow off the debris and dust that have affixed to the front of the imaging device is performed.
9. Using Menu Functions : [Playback] menu • [2D/3D Settings] (P229) • [Slide Show] (P230) • [Playback Mode] (P232) • [Location Logging] (P233) • [RAW Processing] (P234) • [Light Composition] (P237) • [Clear Retouch] (P239) • [Title Edit] (P240) • [Text Stamp] (P241) • [Video Divide] (P242) • [Time Lapse Video] (P243) • [Stop Motion Video] (P243) • [Resize] (P244) • [Cropping] (P245) • [Rotate] (P246) • [Rotate Disp.
9. Using Menu Functions ∫ How to select an image(s) after selecting [Single] or [Multi] • When [Single] and [Multi] are not available, select an image in the same way as when [Single] is selected. [Single] setting 1 Press 2/1 to select the picture. 2 Press [MENU/SET]. • If [Set/Cancel] is displayed at the right bottom of the screen, the setting is canceled when [MENU/SET] is pressed again.
9. Using Menu Functions [Slide Show] You can play back the pictures you have taken in synchronization with music, and you can do this in sequence while leaving a fixed interval between each of the pictures. You can also put together a slide show composed of only still pictures, only motion pictures, etc. We recommend this feature when you view your pictures by connecting the camera to a TV. > MENU 1 [Playback] > [Slide Show] Select the group to play back by pressing 3/4, and then press [MENU/SET].
9. Using Menu Functions ∫ Changing the slide show settings You can change the settings for slide show playback by selecting [Effect] or [Setup] on the slide show menu screen. [Effect] This allows you to select the screen effects when switching from one picture to the next. • [AUTO] can be used only when [Category Selection] has been selected. The pictures are played back with the recommended effects in each category.
9. Using Menu Functions [Playback Mode] Playback in [Normal Play], [Picture Only], [Video Only], [4K PHOTO], [Post Focus], [3D Play], [Category Play] or [Favorite Play] can be selected. MENU > [Playback] > [Playback Mode] 1 Select the group to play back by pressing 3/4, and then press [MENU/SET]. • If you select [Video Only], 4K burst files and images recorded with [Post Focus] will also 2 (When [Category Play] is selected) Press 3/4/2/1 to select the category and then press [MENU/SET] to set.
9. Using Menu Functions [Location Logging] You can write location information sent from a smartphone (latitude and longitude) on images. • You can send location information and write it on images using a smartphone. (P261) • You need to install “Panasonic Image App” on your smartphone. (P254) • Read the [Help] in the “Image App” menu for further details on how to operate. Preparation: Sending location information to the camera from the smartphone.
9. Using Menu Functions [RAW Processing] You can process the pictures taken in RAW format. The processed pictures will be saved in JPEG format. MENU 1 2 > [Playback] > [RAW Processing] Select RAW images with 2/1, and then press [MENU/ SET]. Press 3/4 to select an item. • You can set the following items. The settings you used for the recording are selected when you start setting these items. [White Balance] Allows you to select a White Balance preset and adjust it.
9. Using Menu Functions 3 4 5 Press [MENU/SET] and set. • Refer to “How to set each item” on P235. Press [MENU/SET]. • This operation returns you to the screen in step through 4. 2. To set other items, repeat steps 2 Select [Begin Processing] with 3/4, and then press [MENU/SET]. ∫ How to set each item When you select an item, the setting screen will be displayed. Button operation 2/1 / Touch operation Description of operation Dragging Selects a setting.
9. Using Menu Functions [Setup] setting When you select an item, the screen that asks you to select [Reinstate Adjustments], [Color Space], or [Picture Size] will be displayed. 1 Press 3/4 to select an item, and press [MENU/SET]. • If you select [Reinstate Adjustments], a confirmation screen will be displayed. Selecting [Yes] will execute the operation and return you to the item selection screen. 2 Press 3/4 to select a setting, and press [MENU/SET].
9. Using Menu Functions [Light Composition] Select multiple frames from 4K burst files that you wish to combine. Parts of the image that are brighter than the preceding frame will be superimposed on the preceding frame to combine the frames into one picture. MENU 1 2 > [Playback] > [Light Composition] Press 2/1 to select the 4K photo burst files and press [MENU/SET]. Choose the combining method, and then press [MENU/SET].
9. Using Menu Functions [Range Merging] setting Select the first and last frames to superimpose the brighter parts of the frames between them. 1 Select the frame of the first picture. The selection method is the same as in step 1 of [Composite Merging] setting. 2 Press [MENU/SET]. The position of the first frame will be saved. 3 Select the frame of the last picture. 4 Press [MENU/SET]. The position of the last frame will be saved. 3 Select [Yes] at the confirmation screen, and then press [MENU/SET].
9. Using Menu Functions [Clear Retouch] • The erasure operation can only be performed by touching. [Clear Retouch] automatically enables the touch operation. [Playback] > MENU > [Clear Retouch] 1 2 Press 2/1 to select a picture, and then press [MENU/SET]. Drag your finger over the part you want to delete. • The parts to be erased are colored. • Touching [Undo] will return the colored part back to its previous state. 5(029( 6&$/,1* 8QGR 6HW Erasing details (enlarging the display) 1 Touch [SCALING].
9. Using Menu Functions [Title Edit] You can add text (comments) to pictures. After text has been registered, it can be stamped in prints using [Text Stamp] (P241). MENU 1 2 > [Playback] > [Title Edit] Select the picture. (P229) • [’] is displayed for pictures with titles already registered. Enter the text. (P61) • To delete the title, erase all the text in the text input screen. • You can print out texts (comments) using the software “PHOTOfunSTUDIO” (P296).
9. Using Menu Functions [Text Stamp] You can stamp recording information on recorded images. LISA MENU 1 2 3 4 > [Playback] > [Text Stamp] Select the picture. (P229) • [‘] appears on screen if the picture is stamped with text. Press 3/4 to select [Set], and then press [MENU/SET]. [Shooting Date] Stamps the recording date. [Name] [ ] ([Face Recognition]): Name registered in [Face Recog.] will be stamped. [ ] ([Baby/Pet]): Name registered in [Profile Setup] will be stamped.
9. Using Menu Functions [Video Divide] Recorded motion picture can be divided in two. It is recommended for when you want to divide a part you need with a part you do not need. Dividing a motion picture is permanent. Decide before you divide! MENU > [Playback] > [Video Divide] 1 2 Press 2/1 to select the motion picture to divide, and then press [MENU/SET]. 3 Press 4. • Motion picture may be lost if the card or battery is removed Press 3 at the location to divide.
9. Using Menu Functions [Time Lapse Video] This function allows you to create a motion picture from a picture group recorded with [Time Lapse Shot]. The created motion picture is saved in MP4 recording format. MENU 1 2 > [Playback] > [Time Lapse Video] Select the [Time Lapse Shot] picture group with 2/1, and then press [MENU/ SET]. Create a motion picture by selecting the methods for creating it. • Refer to step 4 onwards on P142 for details. Also refer to the notes on P142 for created motion pictures.
9. Using Menu Functions [Resize] To allow easy posting to web pages, attachment to e-mail etc., picture size (number of pixels) is reduced. MENU > [Playback] > [Resize] Select the picture and size. [Single] setting 1 Press 2/1 to select the picture, and then press [MENU/SET]. 2 Press 3/4 to select the size, and then press [MENU/SET]. 4:3 4:3 4:3 L 16 M 8 S 4 6HW [Multi] setting 1 Press 3/4 to select the size, and then press [MENU/SET].
9. Using Menu Functions [Cropping] You can enlarge and then clip the important part of the recorded picture. MENU 1 2 > [Playback] > [Cropping] Press 2/1 to select the picture, and then press [MENU/SET]. Use the rear dial and press 3/4/2/1 to select the parts to be cropped. Rear dial (right): Enlargement Rear dial (left): Reduction 3/4/2/1: Move • You can also touch [ 3 ]/[ ] to enlarge/reduce. • You can also move by dragging on the screen. Press [MENU/SET].
9. Using Menu Functions [Rotate] (The picture is rotated manually.) Rotate pictures manually in 90o steps. • The [Rotate] function is disabled when [Rotate Disp.] is set to [OFF]. MENU 1 2 > [Playback] > [Rotate] Press 2/1 to select the picture and then press [MENU/SET]. Select the rotation direction. : The picture rotates clockwise in steps of 90o. : The picture rotates counter-clockwise in steps of 90o. [Rotate Disp.] (The picture is automatically rotated and displayed.
9. Using Menu Functions [Favorite] You can do the following if a mark has been added to pictures and they have been set as favorites. • Play back the pictures set as favorites only as a slide show. • Play back only the pictures set as favorites. ([Favorite Play]) • Delete all the pictures not set as favorites. ([All Delete Except Favorite]) MENU > [Playback] > [Favorite] Select the picture. (P229) ∫ Canceling all the [Favorite] settings Press 3/4 to select [Cancel], and then press [MENU/SET].
9. Using Menu Functions [Print Set] DPOF “Digital Print Order Format” is a system that allows the user to select which pictures to print, how many copies of each picture to print and whether or not to print the recording date on the pictures when using a DPOF compatible photo printer or photo printing store. For details, ask at your photo printing store. • When you set [Print Set] for a group pictures, the print setting for the number of prints will be applied to every picture in the group.
9. Using Menu Functions [Protect] You can set protection for pictures you do not want to delete by mistake. MENU > [Playback] > [Protect] Select the picture. (P229) ∫ Canceling all the [Protect] settings Press 3/4 to select [Cancel], and then press [MENU/SET]. Even if you do not protect pictures on a card, they cannot be deleted when the card’s Write-Protect switch is set to [LOCK]. • The [Protect] feature is only designed to work with this camera.
9. Using Menu Functions [Picture Sort] You can set the order in which the camera displays images during playback. MENU > [Playback] > [Picture Sort] [FILE NAME] Displays images by folder name/file name. This display format allows you to locate images in the card easily. [DATE/TIME] Displays images by recording date. If the card contains pictures taken with more than one camera, this display format is convenient for looking for images.
10.
10. Using the Wi-Fi function Wi-Fi function ∫ Before Use • Set the date and time settings in advance. (P35) • To use the Wi-Fi function on this unit, a wireless access point or a destination device equipped with the wireless LAN function is required.
10. Using the Wi-Fi function When the camera is connected to Wi-Fi, you can press [Wi-Fi] and perform the following operations: [Terminate the Connection] [Change the Destination] ¢1 [Change Settings for Sending Images]¢2 Terminates the Wi-Fi connection. Terminates the Wi-Fi connection, and allows you to select a different Wi-Fi connection. Refer to P268 for details.
10. Using the Wi-Fi function Controlling with a Smartphone/Tablet With a smartphone, you can record images remotely, play back images on the camera or save them to the smartphone. • You need to install “Panasonic Image App” (referred to as “Image App” from this point on) on your smartphone. Installing the smartphone/tablet app “Image App” The “Image App” is an application provided by Panasonic. • OS App for AndroidTM: Android 4.0 or higher App for iOS: iOS 7.
10. Using the Wi-Fi function Connecting to a smartphone/tablet For both iOS devices (iPhone/iPod touch/iPad) and Android devices Connecting without using the password You can easily set up a direct connection to your smartphone without entering a password. 1 Select the menu on the camera. (P54) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] > [Remote Shooting & View] 2 3 4 5 A SSID • When the camera is ready to be connected to the smartphone, the SSID is displayed.
10. Using the Wi-Fi function Using a password to set up a connection Connecting with a password further enhances security. You can scan a QR code or manually enter a password to set up a connection. For both iOS devices (iPhone/iPod touch/iPad) and Android devices Using the QR code to set up a connection Preparations: Set [Wi-Fi Password] to [ON]. MENU > [Setup] > [Wi-Fi] > [Wi-Fi Setup] > [Wi-Fi Password] > [ON] 1 Select the menu on the camera.
10. Using the Wi-Fi function For both iOS devices (iPhone/iPod touch/iPad) and Android devices Manually entering a password to set up a connection Preparations: Set [Wi-Fi Password] to [ON]. MENU > [Setup] > [Wi-Fi] > [Wi-Fi Setup] > [Wi-Fi Password] > [ON] 1 Select the menu on the camera.
10. Using the Wi-Fi function When connecting via a wireless access point ([Via Network]): On the camera 1 Select [Via Network]. • Follow the connection procedure described on P283 to connect the camera to a wireless access point. On your smartphone 2 3 4 Turn on the Wi-Fi function. Connect the smartphone to the wireless access point to which the camera is connected. Start “Image App”. (P254) When directly connecting the camera and smartphone ([Direct]): On the camera 1 Select [Direct].
10. Using the Wi-Fi function Taking images via a smartphone/tablet (remote recording) 1 2 Connect to a smartphone. (P255) Operate the smartphone. 1 Select [ ]. 2 Record an image. • The recorded images are saved in the camera. • Some settings are not available. • When recording with 4K Pre-Burst with the smartphone, terminate the connection only after switching to 4K Burst recording by pressing [ ] on the camera.
10. Using the Wi-Fi function Playing back images in the camera 1 2 Connect to a smartphone. (P255) Operate the smartphone. 1 Select [ ]. • You can switch the images to be displayed by selecting the icon (A) on the top left of the screen. To display images stored in the camera, select [LUMIX]. 2 Touch the image to enlarge it. • When you play a motion picture, the camera transmits it to the “Image App” at a reduced data size.
10. Using the Wi-Fi function Sending images in the camera to an SNS 1 2 Connect to a smartphone. (P255) Operate the smartphone. 1 Select [ ]. • You can switch the images to be displayed by selecting the icon (A) on the top left of the screen. To display images stored in the camera, select [LUMIX]. 2 Touch and hold an image, and drag it to send it to an SNS, etc. • The image is sent to a web service such as an SNS.
10. Using the Wi-Fi function ∫ Recording location information and images 1 Start recording location information with the smartphone. 1 Start “Image App”. (P254) 2 Select [ ]. 3 Select [Geotagging]. 4 Select [ ] to start recording location information. 2 3 Record images with the camera. Stop recording the location information with the smartphone. 1 Select [ ] to stop recording the location information. ∫ Writing the location information to the images (Preparation on the camera) Connect to a smartphone.
10. Using the Wi-Fi function Combining motion pictures recorded with Snap Movie according to your preference on a smartphone/tablet Using a smartphone, you can combine motion pictures recorded with the camera’s [Snap Movie] function (P176). Music can be added to motion pictures to be combined. In addition, you can save the combined motion picture or upload it on a web service. A B C D Record motion pictures with [Snap Movie]. Send the recorded motion pictures. Edit the motion pictures.
10. Using the Wi-Fi function Displaying pictures on a TV You can display pictures on a TV that supports the Digital Media Renderer (DMR) function of the DLNA standard. Preparations Set the TV to DLNA waiting mode. • Read the operating instructions for your TV. 1 Select the menu. (P54) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] > [Playback on TV] 2 3 4 Select [Via Network] or [Direct], and connect. (P282) Select a device you want to connect.
10. Using the Wi-Fi function Sending images When sending images, select the method for sending them after selecting [New Connection]. After the connection has been completed, settings for sending, such as the image size for sending, can also be changed. ∫ Images that can be sent JPEG RAW MP4¢1 AVCHD¢1, 2 4K Burst File¢1 Pictures recorded in [Post Focus]¢1 3D [Smartphone] (P269) ± — ±¢3 — — — [PC] (P272) ± ± ± ± ± ± [Cloud Sync.
10. Using the Wi-Fi function Send Images While Recording A picture can be automatically sent to a specified device every time you take it. • When connected with [Send Images While Recording], [ ] is displayed on the recording screen, and [ ] is displayed while sending a file. • To terminate the connection, follow the steps below: 55 MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [Yes] • You can terminate the connection or change the send settings by pressing [Wi-Fi].
10. Using the Wi-Fi function Send Images Stored in the Camera Images can be selected and sent after recording. ∫ How to select an image(s) after selecting [Single Select] or [Multi Select] [Single Select] setting 1 Select the picture. 2 Select [Set]. 6HW [Multi Select] setting 1 Select the picture. (repeat) • The setting is canceled when the picture is selected 2 again. 2. Select [OK]. • The number of pictures that can be sent by [Multi Select] is limited.
10. Using the Wi-Fi function Changing the settings for sending images Pressing [DISP.] after completing a connection allows you to change the settings for sending such as the image size for sending. [Size] Resize the image to send. [Original]/[Auto]¢1/[Change] • If you select [Auto], the image size is determined by the circumstances at the destination. • You can select the image size for [Change] from [M], [S] or [VGA]. The aspect ratio does not change.
10. Using the Wi-Fi function Sending images to a smartphone/tablet Preparations • Install the “Image App” in advance. (P254) 1 Select the menu. (P54) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] > [Send Images While Recording] or [Send Images Stored in the Camera] > [Smartphone] 2 Select [Via Network] or [Direct], and connect. (P282) On your smartphone When connecting with [Via Network]: 1 Turn on the Wi-Fi function. 2 Select the wireless access point you want to connect to, and set.
10. Using the Wi-Fi function Printing Wirelessly You can send images to a compatible printer, and print them wirelessly. Preparations To print out recorded pictures wirelessly, you must use a printer that supports PictBridge (wireless LAN)¢. ¢ Compliant with the DPS over IP standards. • For details on the PictBridge (wireless LAN-compatible) printer, contact the respective company. 1 Select the menu.
10. Using the Wi-Fi function When sending images to AV device You can send pictures and motion pictures to AV devices in your house (home AV devices). A Wireless access point B Home AV device Preparations When sending a picture to AV devices, set your device to DLNA waiting mode. • Read the operating instructions of your device for details. 1 Select the menu.
10. Using the Wi-Fi function When sending images to PC You can send pictures and motion pictures recorded with this unit to a PC. Preparations (On your PC) • Turn the computer on. been changed from the standard setting, you • Prepare folders for receiving images on the (On the camera) • If the workgroup of the destination PC has also need to change the setting of this unit in [PC Connection]. (P288) PC before sending a picture to the PC.
10. Using the Wi-Fi function (For Mac) Supported OS: OS X v10.5 to v10.11 Example: OS X v10.8 1 Select a folder you intend to use for receiving, then click on the items in the following order. [File] [Get Info] 2 Enable sharing of the folder. • For details, refer to the operating instructions of your PC or Help on the OS. Sending images to the PC 1 Select the menu.
10. Using the Wi-Fi function Using Web services You can send pictures and motion pictures to an SNS, etc. via “LUMIX CLUB”. By setting up automatic transfers of pictures and motion pictures to the Cloud Sync Service, you can receive the transferred pictures or motion pictures on a PC or smartphone. LUMIX CLUB A Wireless access point B Web service C Cloud Sync Service Preparations To send images to a web service or a cloud folder, you need to register to “LUMIX CLUB” (P278).
10. Using the Wi-Fi function Registering web services When sending images to web services, the web service being used must be registered with the “LUMIX CLUB”. (P278) • Check the “FAQ/Contact us” on the following site for compatible web services. http://lumixclub.panasonic.net/eng/c/lumix_faqs/ Preparation: Make sure that you have created an account on the web service you want to use, and have the login information available. 1 2 3 4 Connect to the “LUMIX CLUB” site using a smartphone or computer.
10. Using the Wi-Fi function ∫ Sending images in the camera to a web service with simple operations Once you send an image, you can send other images to a web service with simple, smartphone-like operations in an environment where a wireless access point connection is available. (The instructions below assume that you are already registered to “LUMIX CLUB” and the camera has a record of a connection to a wireless access point.) 1 2 Display an image. Press 4.
10. Using the Wi-Fi function When sending images to [Cloud Sync. Service] ∫ Using [Cloud Sync. Service] (As of April 2016) Preparations You need to register to “LUMIX CLUB” (P278) and configure the Cloud Sync. setting to send a picture to a Cloud Folder. For a PC, use “PHOTOfunSTUDIO” (P296) to set up Cloud Sync settings. For a smartphone, use “Image App” to set them up. • If you set the picture destination to [Cloud Sync.
10. Using the Wi-Fi function Registering to the “LUMIX CLUB” If you register this unit to the “LUMIX CLUB”, you can synchronize images between the devices you are using, or transfer these images to web services. Use the “LUMIX CLUB” when uploading pictures to web services. About the [LUMIX CLUB] Acquire a “LUMIX CLUB” login ID (free). • You can set the same “LUMIX CLUB” login ID for this unit and a smartphone. (P280) Refer to the “LUMIX CLUB” site for details. http://lumixclub.panasonic.
10. Using the Wi-Fi function 4 5 Enter a password. • Enter any combination of 8 to 16 characters and numbers for the password. • For information on how to enter characters, refer to P61. Check the login ID and select [OK]. • Be sure to make a note of the login ID and password. • The login ID (12-digit number) will be displayed automatically. When logging in to the “LUMIX CLUB” with a computer, you only need to enter the numbers. • A message is displayed when the connection is complete. Select [OK].
10. Using the Wi-Fi function To set the same login ID for the camera and the smartphone/tablet Setting the same login ID on this unit and your smartphone is convenient for sending images on this unit to other devices or web services. When either this unit or the smartphone/tablet has acquired the login ID: 1 2 Connect this unit to the smartphone. (P255) From the “Image App” menu, set the common login ID. • The login IDs for this unit and the smartphone become the same.
10. Using the Wi-Fi function Delete your login ID and account from the “LUMIX CLUB” Delete the login ID from the camera when transferring it to another party or disposing of it. You can also delete your “LUMIX CLUB” account. 1 Select the menu. (P54) MENU 2 3 4 > [Setup] > [Wi-Fi] > [Wi-Fi Setup] > [LUMIX CLUB] > [Delete account] • The message is displayed. Select [Next]. Select [Yes] in the login ID delete confirmation screen. • The message is displayed. Select [Next].
10. Using the Wi-Fi function About Connections If you have selected [New Connection], select a Wi-Fi function and destination first, and then select a connection method. If you have selected [Select a destination from History] or [Select a destination from Favorite], you can connect with the same Wi-Fi connection settings as used previously. This section describes connection methods. • When connecting with the same settings as used previously, refer to P286.
10. Using the Wi-Fi function Connecting via a wireless access point (via the network) You can select the method for connecting to a wireless access point. ¢ WPS refers to a function that allows you to easily configure the settings related to the connection and security of wireless LAN devices. To check if the wireless access point you are using is compatible with WPS, refer to the manual of the wireless access point.
10. Using the Wi-Fi function If you are not sure about the WPS compatibility (connecting by [From List]) Search for available wireless access points. • Confirm encryption key of the selected wireless access point if the network authentication is encrypted. • When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the wireless access point you are using. 1 Select the wireless access point you are connecting to. • Pressing [DISP.] will search for a wireless access point again.
10. Using the Wi-Fi function • Check the wireless access points instruction manual and settings when saving a wireless access point. • If no connection can be established, the wireless access point’s radio waves may be too weak. Refer to “Message Display” (P316) and “Troubleshooting” (P318) for details. • Depending on your environment, transmission speed between the camera and wireless access point may decrease. In addition, the wireless access point may not be available for use.
10. Using the Wi-Fi function Connecting quickly with the same settings as the previous ones ([Select a destination from History]/[Select a destination from Favorite]) When the Wi-Fi function is used, a record is saved in the history. You can register records as favorites. Using the history or favorites list, you can easily connect with the same settings as used previously. Check to see if the Wi-Fi settings of the device to connect to are the same as used previously.
10. Using the Wi-Fi function Editing the history registered to favorites 1 Select the menu. (P54) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [Select a destination from Favorite] 2 Select the favorite history you want to edit, and then press 1. [Remove from Favorite] [Change the Order in Favorite] [Change the Registered Name] — Select the destination. • For information on how to enter characters, refer to P61. • A maximum of 30 characters can be entered.
10. Using the Wi-Fi function [Wi-Fi Setup] Menu Configure the settings required for the Wi-Fi function. The settings cannot be changed when connected to Wi-Fi. Select the menu. (P54) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Setup] > Desired item to be set You can improve security by enabling password entry for a direct connection to a smartphone. [Wi-Fi Password] [ON]: Connects the camera and a smartphone using an SSID and password. (P256) [OFF]: Connects the camera and a smartphone using an SSID.
10. Using the Wi-Fi function To prevent incorrect operation or use of the Wi-Fi function by a third party and to protect saved personal information, it is recommended that you protect the Wi-Fi function with a password. [Wi-Fi Function Lock] Setting a password will automatically display the password input screen when the Wi-Fi function is used. [Setup]: Enter any 4-digit numbers as the password. [Cancel] • For information on how to enter characters, refer to P61. • Make a copy of password.
11. Connecting to other equipment Watching 4K motion pictures on a TV/ Saving 4K motion pictures on your PC or recorder Watching motion pictures in 4K ∫ Playing Back on a TV Screen By connecting the camera to a TV that supports motion pictures in 4K and playing back motion pictures recorded with their size set to [4K] in [Rec Quality], you can enjoy finely-detailed motion pictures in 4K.
11. Connecting to other equipment Storing 4K motion pictures ∫ Storing on a PC Refer to P295 for details. ∫ Storing on a Hard Disk or DVD You cannot dub motion pictures recorded with their size set to [4K] in [Rec Quality] to Blu-ray discs and DVDs with Panasonic recorders. (As of April 2016) You can use the software “PHOTOfunSTUDIO” (P296) to convert the file size of a motion picture to a smaller size or copy it to a DVD. • Refer to the operating instructions of “PHOTOfunSTUDIO” (PDF).
11. Connecting to other equipment Playing Back Pictures on a TV Screen You can view pictures on a TV screen by connecting your camera to your TV with the HDMI micro cable. Preparations: Turn this unit and the TV off. 1 Connect the camera and a TV. • Check the direction of the terminals and plug in/out straight holding onto the plug. (It may result in malfunction by the deforming of the terminal if it is plugged in obliquely or in wrong direction.) Do not connect devices to incorrect terminals.
11. Connecting to other equipment The recorded pictures can be played back on a TV with an SD Memory Card slot • Depending on the TV model, pictures may not be displayed on the full screen. • The file format of the motion pictures that can be played back differs depending on the TV model. • In some cases, panorama pictures cannot be played back. Also, auto-scroll playback of panorama pictures may not work. • For cards compatible with playback, refer to the operating instructions of the TV.
11. Connecting to other equipment Using VIERA Link (HDMI) What is the VIERA Link (HDMI) (HDAVI Control™)? • This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using an HDMI micro cable for automatic linked operations. (Not all operations are possible.
11. Connecting to other equipment Saving still pictures and motion pictures on your PC You can acquire recorded pictures to a PC by connecting the camera and the PC. • Some PCs can read directly from the card removed from the camera. For details, refer to the operating instructions of your PC. ∫ PC that can be used The unit can be connected to any PC capable of recognizing a mass storage device. • Windows support: Windows 7/Windows 8/Windows 8.1/Windows 10 • Mac support: OS X v10.5 to v10.
11. Connecting to other equipment Downloading software Download and install software to edit and play back images with a PC. PHOTOfunSTUDIO 9.9 PE This software allows you to manage images. For example, you can send pictures and motion pictures to a PC and sort them by recording date or model name. You can also perform operations such as writing images to a DVD, processing and correcting images, and editing motion pictures. Check the site below to download and install the software.
11. Connecting to other equipment SILKYPIX Developer Studio SE This is software to edit RAW format images. Edited images can be saved in a format (JPEG, TIFF, etc.) that can be displayed on a personal computer. Check the site below to download and install the software. http://www.isl.co.jp/SILKYPIX/english/p/ • Operating environment OS Windows WindowsR 7, WindowsR 8, WindowsR 8.1, WindowsR 10 Mac Mac OS X v10.6 to v10.
11. Connecting to other equipment Transferring images to a PC Preparations: Install “PHOTOfunSTUDIO ” to the PC. (P296) 1 Connect the computer and camera with the USB connection cable (supplied). • Please turn this unit on and your PC before connecting. • Check the direction of the terminals and plug in/out straight holding onto the plug. (It may result in malfunction by the deforming of the terminal if it is plugged in obliquely or in wrong direction.) Do not connect devices to incorrect terminals.
11. Connecting to other equipment ∫ Copying to a PC without using “PHOTOfunSTUDIO ” If you are not able to install “PHOTOfunSTUDIO”, you can copy files and folders to your PC by dragging and dropping files from this unit. • The content (folder structure) on the card of this unit is as follows. For Windows: A drive ([LUMIX]) is displayed in [Computer] For Mac: A drive ([LUMIX]) is displayed on the desktop • Card DCIM 100_PANA P1000001.JPG P1000002.JPG P1000999.
11. Connecting to other equipment Saving still pictures and motion pictures on a Recorder If you insert card holding content recorded with this unit into a Panasonic recorder, you can dub the content to a Blu-ray Disc or DVD etc. Methods to export still pictures and motion pictures to other devices will vary depending on the file format. (JPEG, RAW, MPO, AVCHD, or MP4).
11. Connecting to other equipment Printing the Pictures If you connect the camera to a printer supporting PictBridge, you can select the pictures to be printed out and instruct that printing be started on the camera’s monitor. • Group pictures will not be displayed as group pictures but as single pictures. • Some printers can print directly from the card removed from the camera. For details, refer to the operating instructions of your printer. Preparations: Turn on the camera and the printer.
11. Connecting to other equipment • Disconnect the USB connection cable after printing. • Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery power becomes low while the camera and the printer are connected, the status indicator blinks and the alarm beeps. If this happens during printing, stop printing at once. If not printing, disconnect the USB connection cable.
11. Connecting to other equipment ∫ Print Settings Select and set the items both on the screen in step 2 of the “Selecting a single picture and printing it” and in step 3 of the “Selecting multiple pictures and printing them” procedures. [Print with Date] Sets date printing. [Num.of prints] Sets the number of pictures to be printed (up to 999 pictures). [Paper Size] Sets the paper size. [Page Layout] Sets whether or not to add borders and how many pictures to be printed on each sheet of paper.
11. Connecting to other equipment Enjoying 3D pictures Taking 3D pictures Attaching the 3D interchangeable lens (H-FT012: optional) to the camera allows you to take 3D pictures for extra impact. 1 2 Attach the 3D interchangeable lens to the camera. Bring the subject into the frame and record by pressing the shutter button fully. • Focusing is not required when recording 3D pictures. • Still pictures recorded with the 3D interchangeable lens attached are saved in MPO format (3D).
11. Connecting to other equipment Playing back 3D pictures Connecting the camera to a 3D compatible television and playing back pictures taken in 3D allows you to enjoy 3D pictures for extra impact. Preparations: Set the [HDMI Mode (Play)] to [AUTO], [1080p] or [1080i]. (P224) Set the [3D Playback] to [ ]. (P225) Connect the unit to a 3D compatible television using the HDMI micro cable and display the playback screen.
11.
12. Others Optional accessories • Some optional accessories may not be available in some countries. External Flash (optional) After attaching the flash (DMW-FL200L, DMW-FL360L, DMW-FL580L: optional), the effective range will be increased when compared to the camera’s built in flash. Preparations: • Turn off the camera and close the built-in flash. Removing the Hot Shoe Cover The camera comes with a hot shoe cover attached to the hot shoe.
12. Others • When an external flash is attached, the following functions are available in addition to the functions available with the built-in flash. – Burst recording (when a setting other than [SH] is selected for [Burst Rate]) – Aperture Bracket – Focus Bracket • You can set the aperture value, the shutter speed and the ISO sensitivity on the camera even when attaching the external flash.
12. Others Monitor Display/Viewfinder Display • The following images are examples of when the display screen is set to [ ] (monitor style) in the monitor. In recording 60p 4:3 L BKT AFS ラュン Fn5 Fn6 × F MINI SS Fn7 Fn8 AEL BKT 3.5 60 BKT 0 200 BKT AWB SNAP 98 1 STD.
12. Others 2 4 A› Quality (P193) AF area (P93, 102) AFS AFF AFC MF Focus Mode (P95, 106) Spot metering target (P194) Focus Bracket (P140) Self-timer (P137) Post Focus (P131) Mic level display (P208) BKT AFS š Ø Silent Mode (P210) AF Mode (P97) AE Lock (P109) AEL Pull Focus (P178) AE Face Recognition (P204) AFL Program Shift (P70) AF Lock (P109) 3.
12.
12. Others In recording On-monitor recording information 3 F 3.5 1/60 Single (P134) 0 ISO AUTO AFS Burst (P135) 0 0 4:3 L Wi-Fi Fn AWB 98 4K Photo (P118) Self-timer (P137) 1 AFS AFF AFC MF Focus Mode (P95, 106) š Ø AF Mode (P97) Quality (P193) A› C1 1 4:3 Recording Mode (P43) EXPS Picture size/Aspect Ratio (P192) L Wi-Fi F3.
12. Others In playback 2 4:3 1 L 1/98 Icon indicating the presence of a marker (P126) SLF Post Focus (P131) 67 '$< 4K Photo (4K burst file) (P118) 4:3 L PRQWK GD\V F3.
12. Others SUB MENU 3 Silent Mode (P210) Clear Retouch completed icon (P239) 67 '$< Sub Menu (P276) PRQWK GD\V Age (P206, 207) Currently retrieving information icon (P130) Multi Playback (P183) Playback (Motion Pictures) (P180) Delete (P186) Number of days that have passed since the departure date (P220) 4 Upload (Wi-Fi) (P276) Name¢2 (P206, 207) Burst Picture Group Display (P185) Location¢2 (P220) Focus Bracket Group Display (P185) Title¢2 (P240) [Time Lapse Shot] Picture Group Dis
12. Others In playback Histogram display F3.5 60 0 ISO200 1 1/98 100-0001 3 1/98 Histogram (P50) 2 Picture number/Total pictures 100-0001 Folder/File number (P299) Recording information ¢1 h: hour, m: minute, s: second ¢2 It is displayed in order of [Title], [Location], [Name] ([Baby1]/[Baby2], [Pet]), [Name] ([Face Recog.]).
12. Others Message Display Confirmation messages or error messages will be displayed on the screen in some cases. The major messages are described below as examples. [Some pictures cannot be deleted]/[This picture cannot be deleted] • This feature can only be used with pictures that comply with the DCF standard. Perform formatting (P29) on this unit after saving necessary data on a PC, etc. [Cannot be set on this picture] • [Title Edit], [Text Stamp], [Print Set], etc.
12. Others [Motion recording was cancelled due to the limitation of the writing speed of the card] • Depending on the [Rec Format] and [Rec Quality] of a motion picture, the speed class rating required for the card differs. 4K photo recording requires a card that meets a particular speed class rating. Use a card that meets the rating. For details, refer to “About motion picture/4K photo recording and speed class ratings” on P28.
12. Others Troubleshooting First, try out the following procedures (P318 to P327). If the problem is not resolved, it may be improved by selecting [Reset] (P226) on the [Setup] menu. Battery and power source When I shake the camera, I hear a rattling sound from the camera. • The sound is caused by the In-Body Image Stabilizer. This is not a malfunction. The camera cannot be operated even when it is turned on. The camera turns off immediately after it is turned on. • The battery is exhausted.
12. Others The recorded picture is whitish. • Picture might look whitish when lens or image sensor gets dirty with fingerprints or similar. > If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft, dry cloth. > Refer to P329 when the image sensor gets dirty. The recorded picture is too bright or dark. • Is the AE Lock (P109) applied incorrectly? Multiple pictures are taken at one time. • Check the drive mode setting.
12. Others Striping or flicker may appear under lighting such as fluorescent lighting and LED lighting fixture. • This is characteristic of MOS sensors which serve as the camera’s pickup sensors. This is not a malfunction. • When using the electronic shutter (P199), lowering the shutter speed may reduce the effect of the horizontal stripes.
12. Others Motion pictures Recording motion pictures is not possible. • You may not be able to record for a short while after turning this unit on when using a large capacity card. Motion picture recording stops in the middle. • When the ambient temperature is high or motion picture is recorded continuously, the camera may display [ ] and stop the recording to protect itself. Wait until the camera cools down.
12. Others Lens When the lens is attached to another digital camera, stabilizer function cannot be turned off or stabilizer function does not work. • The Optical Image Stabilizer function of the interchangeable lens (H-FS12032/H-FS35100) only works correctly with supported cameras. > When older Panasonic digital cameras (DMC-GF1/DMC-GH1/DMC-G1) are used, [Stabilizer] in the [Rec] menu cannot be set to [OFF]. It is recommended to update the firmware of the digital camera at the following website.
12. Others Monitor/Viewfinder The Monitor/Viewfinder turns off although the camera is turned on. • If no operations are performed during the set time period, [Auto LVF/Monitor Off] (P223) is activated, and the Monitor/Viewfinder turns off. • When an object or your hand is positioned near the eye sensor, the Monitor display may switch to the Viewfinder display. (P41) It may flicker for an instant or the brightness of the screen may change significantly for an instant.
12. Others Wi-Fi function A Wi-Fi connection cannot be established. Radio waves get disconnected. Wireless access point is not displayed. ∫ General tips for using a Wi-Fi connection • Use within the communication range of the device to be connected. • Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency operated nearby? > Radio waves may get interrupted when used simultaneously. Use them sufficiently away from the device.
12. Others The PC is not recognized when I use a Wi-Fi connection. The camera cannot be connected to PC via Wi-Fi connection. • The default workgroup name is set to “WORKGROUP”. If you changed the workgroup name, the PC will not be recognized. In [Change Workgroup Name] in [PC Connection] of the [Wi-Fi Setup] menu, change the workgroup name to that of the PC you are connecting to. (P288) • Please confirm login name and password are correctly typed.
12. Others TV, PC and printer The picture does not appear on the television. • Is the camera connected to the TV correctly? (P292) > Set the TV input to external input mode. VIERA Link does not work. • Is the [VIERA Link] on this unit set to [ON]? (P225) > Check the VIERA Link setting on the connected device. > Turn this unit off and on. Cannot communicate with the PC. • Set to [PC] in [USB Mode]. (P223, 298) • Turn this unit off and on. The card is not recognized by the PC. (SDXC memory card is used.
12. Others Others When I shake the camera, I hear a rattling sound from the attached lens. • Depending on the lens you attach, it may move inside and create a sound. This is not a malfunction. The camera makes a noise when this unit is turned on. • This is the noise of the Dust Reduction Function working (P329); it is not a malfunction. There is a sound from lens unit. • It is a sound of lens movement or aperture operation when this unit is turned on or off, and it is not a malfunction.
12. Others Cautions for Use Optimal use of the camera Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). • If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. • Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
12. Others Cleaning Before cleaning the camera, remove the battery or the DC coupler (optional), or disconnect the power plug from the outlet. Then wipe the camera with a dry, soft cloth. • When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth, and then with a dry cloth. • Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the camera, since it may deteriorate the external case or the coating may peel off.
12. Others ∫ For care of the viewfinder/Eyecup • As the eye cup cannot be removed, blow away the dust on the viewfinder surface with a blower (commercially available), gently wipe it with a dry and soft cloth, and be careful not to remove it. • If you wipe the eye cup too hard and it is removed, consult the dealer or Panasonic. About the Monitor/Viewfinder • Do not press the monitor with excessive force. Uneven colors may appear on the monitor and it may malfunction.
12. Others Battery The battery is a rechargeable lithium ion battery. Its ability to generate power comes from the chemical reaction that takes place inside it. This reaction is susceptible to the surrounding temperature and humidity. If the temperature is too high or too low, the operating time of the battery will become shorter. Always remove the battery after use. • Place the removed battery in a plastic bag, and store or keep away from metallic objects (clips, etc.).
12. Others About 3D ∫ About 3D recording With the 3D interchangeable lens attached, do not record a subject at less than the minimum focus distance. • The 3D effects may be more pronounced, and therefore cause tiredness or discomfort. • When the 3D interchangeable lens (H-FT012: optional) is used, the minimum focus distance is 0.6 m (2.0 feet). When recording with the 3D interchangeable lens attached, be careful not to shake the unit.
12. Others About the personal information If a name or birthday is set for [Profile Setup]/Face Recognition function, this personal information is kept in the camera and recorded in the image. We recommend that you enable [Wi-Fi Password] and [Wi-Fi Function Lock] to protect personal information. (P288 , 289) Disclaimer • Information including personal information may be altered or vanish due to erroneous operation, effect of static electricity, accident, malfunction, repair, or other handlings.
12. Others About the picture data • Recorded data may be damaged or lost if the camera breaks down due to inappropriate handling. Panasonic will not be liable for any damage caused due to loss of recorded data. About tripods or unipods • When you use a tripod, make sure the tripod is stable when this unit is attached to it. • You may not be able to remove the card or the battery when using a tripod or unipod.
12. Others ∫ Do not use the camera in areas with magnetic fields, static electricity or interference • Do not use the camera in areas with magnetic fields, static electricity or interference, such as near microwave ovens. These may cause the interruption of the radio waves. • Using the camera near devices such as microwave ovens or cordless telephones that use the 2.4 GHz radio wave band may cause a decrease in performance in both devices.
12. Others • G MICRO SYSTEM is a lens exchange type digital camera system of LUMIX based on a Micro Four Thirds System standard. • Micro Four Thirds™ and Micro Four Thirds Logo marks are trademarks or registered trademarks of Olympus Imaging Corporation, in Japan, the United States, the European Union and other countries. • Four Thirds™ and Four Thirds Logo marks are trademarks or registered trademarks of Olympus Imaging Corporation, in Japan, the United States, the European Union and other countries.
• Android and Google Play are trademarks or registered trademarks of Google Inc. • The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi AllianceR. • The Wi-Fi Protected Setup™ Identifier mark is a certification mark of Wi-Fi AllianceR. • “Wi-FiR” and “Wi-Fi DirectR” are registered trademarks of Wi-Fi AllianceR. • “Wi-Fi Protected Setup™”, “WPA™”, and “WPA2™” are trademarks of Wi-Fi AllianceR.
