Operating Instructions

10. Using the Wi-Fi/NFC Function
268
∫ Start recording location information
Operate the smartphone.
∫ Finish recording the location information
Operate the smartphone.
∫ Sending and writing location information
1 Connect to a smartphone. (P259)
2 Operate the smartphone.
•
Cautions for Use:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject
when you use this function. Use at your own risk.
• On the smartphone, you can set the acquisition interval of location information and check the
transfer status of location information.
Refer to [Help] in the “Image App” menu for details.
• (When using “Image App” for iOS)
If you press the Home or On/Off button of the smartphone while location information is being
recorded, the recording will stop.
Not available in these cases:
•
The smartphone may fail to acquire location information in China and the border area in the
neighbouring countries of China.
(As of March 2014)
1 Select [ ].
2 Select [Geotagging].
3 Select [ ].
1 Select [ ].
2 Select [Geotagging].
3 Select [ ].
1 Select [ ].
2 Select [Geotagging].
3 Select [ ].
•
Follow the on-screen messages to operate the smartphone.
• Location information is not written onto the images recorded when [Rec Format] is set
to [AVCHD].
• When the card in the camera lacks sufficient free space, writing location information
may not be possible.
• Once the location information is sent to the camera, you can also write it on images by
performing [Location Logging] in the [Playback] menu.


