Quick Start Guide

Preparation/Basic
14
SQT0542 (ENG)
• When attaching or detaching the interchangeable lens (H-FS12032), retract the lens barrel.
• Change lenses where there is not a lot of dirt or dust.
• Do not press the lens release button A when you attach a lens.
∫ Detaching the lens
1 Attach the lens cap.
2 While pressing on the lens release button B, rotate
the lens toward the arrow until it stops and then
remove.
•
Hold and rotate the base area of the lens C.
∫ Extending/retracting the lens [when the interchangeable lens (H-FS12032) is
attached]
Changing the Lens
How to Extend the Lens
Rotate the zoom ring in the direction of arrow
1
from position
A (the lens is retracted) to position B [12 mm to 32 mm (H-
FS12032)] to extend the lens.
•
When the lens barrel is retracted, images cannot be recorded.
C
The lens is retracted
How to Retract the Lens
Rotate the zoom ring in the direction of arrow
2
from position
B [12 mm to 32 mm (H-FS12032)] to position A to retract
the lens.
•
The zoom ring will seem to click into the 12 mm position (H-
FS12032), but continue to rotate the lens until it reaches position
A .
• When you are not recording images, we recommend that you
retract the lens.
D The lens is extended
Example: H-FS12032


DMC-GF7KEB-SQT0542_eng.book 14 ページ ２０１４年１２月２５日 木曜日 午後６時２９分