Quick Start Guide

Preparation/Basic
10
SQT0542 (ENG)
28
25
27
19
32 34
20
29
21
22
333130
23
24
26
19
Touch screen (P18)/monitor (P16)
20
Flash open lever
• The flash opens, and recording with the flash
becomes possible.
21
Motion picture button (P25)
22
[(] (Playback) button (P27)
23
[HDMI] socket
24
[AV OUT/DIGITAL] socket
25
Cursor buttons
• These operating instructions expresses the
up, down, left, and right of the cursor button
as 3/4/2/1.
3/[È] (Exposure Compensation)
1/[ ] (White Balance)
2/[ ] (Auto Focus Mode)
4/[ ] (Drive mode)
– Single/Burst/Auto bracket/Self-timer
26
Control dial
• In these operating instructions, turning the
control dial is indicated as follows.
27
[MENU/SET] button (P19)
28
[DISP.] button
• Each time this is pressed, the display on the
monitor is switched.
29
[ ] (Delete) button (P28)/
[ ] (Quick Menu/Return) button
(P19)
30
[REC. SETTING RESET] button (P18)
• Use this button to restore the default
recording settings.
31
Tripod mount
• It may not be possible to attach and securely
fasten a tripod with a screw length of 5.5 mm
(0.22 inch) or more to the camera. Doing so
may also damage the camera.
32
DC coupler cover
• When using an AC adaptor, ensure that the
Panasonic DC coupler (DMW-DCC15:
optional) and AC adaptor (DMW-AC10E:
optional) are used.
• Always use a genuine Panasonic AC
adaptor (DMW-AC10E: optional).
• When using an AC adaptor, use the AC
mains lead supplied with the AC adaptor.
33
Release lever (P12)
34
Card/Battery door (P12)
DMC-GF7KEB-SQT0542_eng.book 10 ページ ２０１４年１２月２５日 木曜日 午後６時２９分