Operating Instructions

86
Recording
Taking Pictures with Your Favourite Settings
(Programme AE Mode)
Recording Mode:
The camera automatically sets the shutter speed and the aperture value according to the
brightness of the subject.
You can take pictures with greater freedom by changing various settings in the [Rec]
menu.
1
Set the mode dial to [ ].
2
Press the shutter button halfway and display
the aperture value and shutter speed value
on the screen.
• The shutter speed is automatically set between about
20 seconds and 1/4000th of a second in the following
cases.
– When the [Sensitivity] is set to [ISO160].
– When the aperture value is set to F3.5 [when the interchangeable lens (H-PS14042,
H-FS1442A) is attached].
– When the aperture value is set to F4.0 [when the interchangeable lens (H-FS45150) is
attached].
3
While the values are displayed (about 10 seconds), perform the
Programme Shift by rotating the control dial.
• During display of the numerical values, each press of the cursor button 3 switches
between Programme Shift and Exposure Compensation. (P138)
• Rotate the control dial to display the [Expo.Meter] B. (P87)
• The Programme Shift indication A appears on the screen.
• To cancel Programme Shift, turn the camera off or rotate the control dial until the
Programme Shift indication disappears.
Programme Shift is easily cancelled by setting [Fn Button Set] on the [Custom] menu to
[One Push AE]. (P94)
6060604.04.0
4.0
16 0
SSSSSS
FF
250 15
4.0 5.6 8.0
3060125
-3-3 0 ＋3
989898
BA