Operating Instructions

Table Of Contents

Preparation

• When you connect the camera to a TV, the volume of the TV speakers does not change.

• Some subjects may appear differently from actuality on the monitor. However, this does not

affect the recorded pictures.

• The brightness of pictures displayed on the monitor is enhanced, so some subjects on the

monitor may appear different from the actual subjects. However, this enhancement does not

affect recorded pictures.

• The monitor automatically returns to standard brightness if no operations are performed for

30 seconds when recording in [MODE1]. It will light up brightly again with button or touch

operation.

• When [AUTO] or [MODE1] is set, the usage time is reduced.

• [AUTO] is only available in the Recording Mode.

• The initial setting when using the AC adaptor (optional) is [MODE2].

[Speaker Volume] Adjust the volume of the speaker to any of the 7 levels.

[Monitor Display]

Brightness, colour, or red or blue tint of the Monitor is adjusted.

[ ] ([Brightness]):

Adjust the brightness.

[ ] ([Contrast · Saturation]):

Adjust the contrast or clarity of colours.

[ ] ([Red Tint]):

Adjust the red tint.

[ ] ([Blue Tint]):

Adjust the blue tint.

1 Touch the item.

2 Drag the slide bar to adjust.

•

Adjusting can also be performed by rotating the control dial.

3 Touch [Set].

[Monitor Luminance]

Sets the monitor brightness according to the ambient light level.

„ [AUTO]:

The brightness is adjusted automatically depending on how bright

it is around the camera.

[MODE1]:

Make the monitor brighter.

[MODE2]:

Set the monitor to the standard brightness.

[MODE3]:

Make the monitor darker.

…