User manual

12. Others
328
• Depending on the lens you attach, it may move inside and create a sound. This is not a
malfunction.
• This is the noise of the Dust Reduction Function working (P330); it is not a malfunction.
• It is a sound of lens movement or aperture operation when this unit is turned on or off, and it is
not a malfunction.
• The sound, which is caused by the automatic adjustment of the aperture, is heard when the
brightness has changed due to, for example, zooming or the movement of the camera. This is
not a malfunction.
• Press [MENU/SET], select the [Setup] menu icon [ ] and then select the [~] icon to set the
desired language. (P224)
• In dark places, the AF Assist Lamp (P210) lights red to make it easier to focus on a subject.
• The surface of the camera and the reverse side of the monitor may become warm during use.
This does not affect the performance or quality of the camera.
• If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please reset the clock. (P34)
Others
When I shake the camera, I hear a rattling sound from the attached lens.
The camera makes a noise when this unit is turned on.
There is a sound from lens unit.
An unreadable language was selected by mistake.
A red lamp sometimes turns on when the shutter button is pressed halfway.
The camera becomes warm.
The clock is reset.