Basic Operating Instructions
Recording
30
DVQX1015 (ENG)
1 Set the drive mode dial to [ ].
2 Decide on the composition, and press the shutter
button halfway.
•
Auto Focus will detect focus areas on the screen.
(Excluding the edges of the screen)
• If no areas on the screen can be brought into focus, the
focus display (
A
) will flash. Recording is not possible in
this case.
3 Press the shutter button fully to start recording.
•
The focus point changes automatically while recording.
When the icon (
B
) disappears, recording automatically ends.
• A motion picture in MP4 format will be recorded. (Audio will not be recorded.)
• When [Auto Review] is enabled, a screen that lets you select the desired focus area will
be displayed. (P30)
• If the surrounding temperature is high, recording is performed continuously with the Post Focus
function, or the temperature of the camera rises, [ ] may be displayed and recording may
stop halfway through to protect the camera. Wait until the camera cools down.
1 Select an image with the [ ] icon on the playback screen, and press 3.
2 Touch the desired focus area.
•
If a picture that is in focus is not available for the selected
area, a red frame will be displayed. You cannot save a
picture in this case.
• You cannot select the edges of the screen.
From the time you press the shutter button halfway until the end of recording:
• Maintain the same distance to the subject and the same composition.
• Do not operate the zoom.
Selecting the desired focus area and saving a picture
Button operation Touch operation Description of operation
3/4/2/1/ Touching
Selects a focus area.
• It cannot be selected during enlarged display.
Enlarges the display.
Reduces the display (during enlarged display).
[Fn1] Switches to the Focus Stacking function. (P31)
[Fn2]
In-focus portions are highlighted with colour.
([Peaking])
[MENU/SET] Saves the picture.
5
m
04
s
4K
4:3
残
5m04s
A
B
Fn2
Fn1
DMC-G80MHBody&G81MHBody_EB-DVQX1015_mst.book 30 ページ ２０１６年７月２７日 水曜日 午後６時１８分