Operating Instructions for advanced features Digital Camera Model No. DMC-G7 DMC-G70 Please read these instructions carefully before using this product, and save this manual for future use.
Finding the information you need In this “Operating Instructions for advanced features”, you can find the information you need from the following pages. By clicking a page number, you can jump to the linked page and quickly find the information. Search from “Contents” Click this icon to jump to “Contents”.
How to use this manual About the indication of the applicable mode Applicable modes: The icons indicate the modes available for a function. • Black icons: Applicable modes • Grey icons: Unavailable modes will differ depending on the Recording Modes registered under custom settings. • Click a cross reference in the text to jump to the corresponding page. • By entering keywords in the search field at the top of the Adobe Reader screen, you can run a keyword search and jump to the corresponding page.
Quick Start Guide If you want to start taking pictures now, refer to the steps for using the Intelligent Auto Mode as a guide. In Intelligent Auto Mode, you can leave the settings to the camera and take pictures easily. 1 Attach the shoulder Strap. (P23) • Attach the other side of the shoulder strap. Charge the battery. (P24) 2 3 A : Plug-in type B : Inlet type Insert the card (optional)/the battery.
6 7 Turn the camera on and set the clock. (P41) ON OFF Format the card (initialisation). (P33) Set the mode dial to [¦]. (P46) 8 • The settings of the main functions are adjusted automatically. A Press the shutter button halfway to focus. 9 A Focus indication • Once the subject is in focus, the focus indication is displayed. Press the shutter button fully (push it in further), and take the picture. (P44) Check the picture you have taken.
Contents Finding the information you need..............................................................................2 How to use this manual.............................................................................................3 Quick Start Guide ......................................................................................................4 Contents by Function ..............................................................................................12 1.
3. Recording Modes Taking Pictures using the Automatic Function (Intelligent Auto Mode) ...................83 • Recording night scenes ([iHandheld Night Shot]) ..........................................86 • Combining pictures into a single picture with rich gradation ([iHDR]).............87 • Taking a picture with a blurred background (Defocus Control).......................88 • Recording images by changing the brightness or colour tone .......................
5. Focus and Brightness (Exposure) Settings Adjusting Focus Automatically ..............................................................................147 • Selecting the Focus Mode (AFS/AFF/AFC) .................................................149 • Selecting the Auto Focus Mode ...................................................................151 • Setting up position of the AF area/changing size of the AF area .................157 • Setting the AF area position with the Touch Pad......................
8. Stabiliser, Zoom and Flash Optical Image Stabiliser ........................................................................................222 Taking Pictures with the Zoom ..............................................................................224 • Raising the telescopic effect.........................................................................225 • Zooming using touch operations ..................................................................229 Taking pictures by using the flash ......
• [Time Lapse Video].......................................................................................280 • [Stop Motion Video] ......................................................................................280 • [Resize] ........................................................................................................281 • [Cropping] .....................................................................................................283 • [Rotate]/[Rotate Disp.] ..........................
12. Connecting to other equipment Watching 4K motion pictures on a TV/ Saving 4K motion pictures on your PC or recorder...............................................339 • Watching motion pictures in 4K ....................................................................339 • Storing 4K motion pictures ...........................................................................340 Playing Back Pictures on a TV Screen .................................................................
Contents by Function Recording Recording Recording Mode .............................P46 [Preview].......................................P100 Panorama Shot Mode ..................P102 [Multi Exp.]....................................P210 [Silent Mode] ................................P212 [3D Rec] .......................................P357 [Quality] ........................................P141 [i.Dynamic]....................................P143 [i.Resolution].................................P143 [HDR]......
Motion Picture Motion Picture Creative Video Mode ................... P126 [Silent Operation] ......................... P127 [Rec Format] ................................ P246 [Rec Quality] ................................ P246 Motion pictures in 4K ................... P245 Recording still pictures while recording motion pictures............. P249 [Snap Movie] ................................ P251 [Wind Cut] .................................... P362 Screen settings [Center Marker] .........................
Playback Playback [Auto Review]................................. P45 Picture playback........................... P257 Motion picture playback ............... P258 Playback Zoom ............................ P260 Multi Playback.............................. P260 [Delete]......................................... P264 Edit [RAW Processing]........................ P271 [Clear Retouch] ............................ P274 [Resize] ........................................ P281 [Cropping] ............................
1. Before Use Care of the camera Do not subject to strong vibration, shock, or pressure. • The lens, monitor, or external case may be damaged if used in the following conditions. It may also malfunction or image may not be recorded if you: – Drop or hit the camera. – Press hard on the lens or the monitor. This camera is not dust/drip/water proof. Avoid using the camera in places with a lot of dust, water, sand, etc.
1. Before Use Standard Accessories Check that all the accessories are supplied before using the camera. • The accessories and their shape will differ depending on the country or area where the camera was purchased. For details on the accessories, refer to “Basic Operating Instructions”. • Battery Pack is indicated as battery pack or battery in the text. • Battery Charger is indicated as battery charger or charger in the text.
1. Before Use Names and Functions of Components ∫ Camera body 13 14 12 1 2 3 6 7 11 15 16 8 9 10 18 4 17 5 18 23 22 21 1 Focus distance reference mark (P168) 2 Status indicator (P41)/ Wi-Fi® connection lamp (P291) • The lamp lights green when the camera is turned on, and lights blue when it is connected to Wi-Fi.
1. Before Use 25 26 27 28 29 34 35 30 31 32 33 36 37 24 38 41 45 44 43 Flash open button (P230) 26 • The flash opens, and recording with the flash becomes possible.
1. Before Use ∫ Lens H-FS1442A 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 H-FS45150 1 2 3 4 5 6 7 H-FS14140 1 2 3 4 5 8 6 7 19 Lens surface Tele Focus ring (P165) Zoom ring (P224) Wide Contact point Lens fitting mark (P36) [O.I.S.
1. Before Use About the Lens This unit can use the dedicated lenses compatible with the Micro Four ThirdsTM System lens mount specification (Micro Four Thirds mount). You can also use a lens of any of the following standards by attaching a mount adaptor.
1. Before Use About the firmware of your interchangeable lens For smoother recording, we recommend updating the firmware of the interchangeable lens to the latest version. • To view the latest information on the firmware or to download the firmware, visit the support site below: http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.) • To check the firmware version of the interchangeable lens, attach it to the camera body and select [Version Disp.] in the [Setup] menu.
1. Before Use Cards Compatible with this unit The following cards which conform to the SD standard can be used with this unit. (These cards are indicated as card in the text.) • SDHC Memory Cards and SDXC Memory Cards can be SD Memory Card (512 MB to 2 GB) used only with their compatible devices. • Check that the PC and other equipment are compatible when using the SDXC Memory Cards. http://panasonic.net/avc/sdcard/information/SDXC.
2. Getting Started/Basic Operations Attaching the Shoulder Strap • We recommend attaching the shoulder strap when using the camera to prevent it from dropping. 1 Pass the shoulder strap through the shoulder strap eyelet on the camera body. A: Shoulder strap eyelet A 2 3 4 Pass the end of the shoulder strap through the ring in the direction of the arrow and then pass it through the stopper. Pass the end of the shoulder strap through the hole on the other side of the stopper.
2. Getting Started/Basic Operations Charging the Battery ∫ About batteries that you can use with this unit It has been found that counterfeit battery packs which look very similar to the genuine product are made available for purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion.
2. Getting Started/Basic Operations ∫ About the [CHARGE] indicator On: Charging. Off: Charging has completed. (Disconnect the charger from the electrical socket and detach the battery after charging is completed.) • When the [CHARGE] indicator flashes – The battery temperature is too high or too low. It is recommended to charge the battery again in an ambient temperature of between 10 oC and 30 oC (50 oF and 86 oF). – The terminals of the charger or the battery are dirty.
2. Getting Started/Basic Operations Approximate operating time and number of recordable pictures By CIPA standard in Programme AE Mode ∫ Recording still pictures (when using the Monitor) When the interchangeable lens (H-FS1442A) is used Number of recordable pictures Approx. 360 pictures Recording time Approx. 180 min When the interchangeable lens (H-FS45150) is used Number of recordable pictures Approx. 350 pictures Recording time Approx.
2. Getting Started/Basic Operations Recording conditions by CIPA standard • CIPA is an abbreviation of [Camera & Imaging Products Association]. • Temperature: 23 oC (73.4 oF)/Humidity: 50%RH when monitor/viewfinder is on. • When using a Panasonic SDHC Memory Card. • Using the supplied battery. • Starting recording 30 seconds after the camera is turned on.
2. Getting Started/Basic Operations ∫ Recording motion pictures (when using the monitor) [AVCHD] (Recording with picture quality set to [FHD/17M/50i]) When the interchangeable lens (H-FS1442A) is used Recordable time Approx. 130 min Actual recordable time Approx. 65 min When the interchangeable lens (H-FS45150) is used Recordable time Approx. 130 min Actual recordable time Approx. 65 min When the interchangeable lens (H-FS14140) is used Recordable time Approx.
2. Getting Started/Basic Operations [MP4] (Recording with picture quality set to [4K/100M/25p]) When the interchangeable lens (H-FS1442A) is used Recordable time Approx. 100 min Actual recordable time Approx. 50 min When the interchangeable lens (H-FS45150) is used Recordable time Approx. 100 min Actual recordable time Approx. 50 min When the interchangeable lens (H-FS14140) is used Recordable time Approx. 100 min Actual recordable time Approx.
2. Getting Started/Basic Operations ∫ Playback (when using the monitor) When the interchangeable lens (H-FS1442A) is used Playback time Approx. 250 min When the interchangeable lens (H-FS45150) is used Playback time Approx. 250 min When the interchangeable lens (H-FS14140) is used Playback time Approx. 250 min • The operating times and number of recordable pictures will differ according to the environment and the operating conditions.
2. Getting Started/Basic Operations Inserting and Removing the Card (optional)/ the Battery • Check that this unit is turned off. • We recommend using a Panasonic card. 1 1: Slide the release lever in the direction of the arrow. 2: Open the card/battery door. • Always use genuine Panasonic batteries. • If you use other batteries, we cannot guarantee the quality of this product.
2. Getting Started/Basic Operations 3 1: Close the card/battery door. 2: Slide the release lever in the direction of the arrow. • Remove the battery after use. (The battery will be exhausted if left for a long period of time after being charged.) • The battery becomes warm after using it and during and after charging. The camera also becomes warm during use. This is not a malfunction.
2. Getting Started/Basic Operations About the Card Access to the card The access indication displays red when pictures are being recorded on the card. • During access (image writing, reading and deleting, 25p 4:3 L formatting etc.), do not turn this unit off, remove the battery, card or disconnect the AC adaptor (optional). Furthermore, do not subject the camera to vibration, impact or static electricity. The card or the data on the card may be damaged, and this unit may no longer operate normally.
2.
2. Getting Started/Basic Operations • When the ambient temperature is high or motion picture is recorded continuously, the camera may display [ ] and stop the recording to protect itself. Wait until the camera cools down. • Depending on the recording conditions and the type of card, the number of recordable pictures and available recording time vary. • AVCHD motion pictures: Recording stops when the continuous recording time exceeds 29 minutes and 59 seconds.
2. Getting Started/Basic Operations Attaching/Removing the Lens By changing the lens, you will increase your picture taking-options and further your enjoyment of the camera. Change the lens using the following procedure. • Check that the camera is turned off. • Change lenses where there is not a lot of dirt or dust. Refer to P403 when dirt or dust gets on the lens. Attaching the lens 1 Turn the lens rear cap A and the body cap B in the direction of the arrow to detach them.
2. Getting Started/Basic Operations Detaching the lens • Attach the lens cap. While pressing on the lens release button A, rotate the lens toward the arrow until it stops and then remove. A Lens release button • When the lens is removed from the camera body, make sure to attach the body cap to the camera body and attach the lens rear cap to the lens. To enable/disable the shutter release without lens. MENU > [Custom] > [Shoot w/o Lens] [ON]: Shutter will operate regardless of the lens on the unit.
2. Getting Started/Basic Operations Attaching the Lens Hood When recording into strong backlight, irregular reflection may occur within the lens. The lens hood reduces the inclusion of unwanted light in the recorded images and lowers the drop in contrast. The lens hood cuts off excess lighting and improves the picture quality. To attach the lens hood (flower shape) that came with the interchangeable lenses (H-FS1442A/H-FS14140) Hold the lens hood by placing your fingers as shown in the figure.
2. Getting Started/Basic Operations ∫ Interchangeable Lens (H-FS45150) To attach the lens hood that came with the interchangeable lens (H-FS45150) 1 Align the mark A ( ) on the lens hood with the mark on the tip of the lens. 2 Rotate the lens hood in the direction of the arrow until it clicks and then align the mark B ( ) on the lens hood with the mark on the tip of the lens. Temporarily Storing the Lens Hood 1 Turn the lens hood in the direction of the arrow to detach it.
2. Getting Started/Basic Operations Opening the Monitor/Adjusting the Monitor At the time when this camera is purchased, the monitor is stowed in the camera body. Bring out the monitor as shown below. 1 Open the monitor. (Maximum 180o) 2 It can be rotated 180o forward. 3 Return the monitor to its original position. • Only rotate the monitor after opening it wide enough, and be careful not to use excessive force as it may be damaged. ∫ Free angle shooting The monitor can be rotated to suit your needs.
2. Getting Started/Basic Operations Setting Date/Time (Clock Set) • The clock is not set when the camera is shipped. 1 Turn the camera on. • When the camera is turned on, the status indicator 1 ON OFF lights up green. • If the language select screen is not displayed, proceed to step 4. 2 3 4 5 Press [MENU/SET]. Press 3/4 to select the language, and press [MENU/SET]. Press [MENU/SET]. Press 2/1 to select the items (year, month, day, hour, minute), and press 3/4 to set.
2. Getting Started/Basic Operations Re-adjusting the clock Select [Clock Set] in the [Setup] menu. (P63) • The clock can be reset as shown in steps 5 and 6 on P41. • The clock setting is maintained for 3 months using the built-in clock battery even without the battery. (Leave the charged battery in the unit for 24 hours to charge the built-in battery.
2. Getting Started/Basic Operations Basic Operations Tips for taking good pictures Hold the camera gently with both hands, keep your arms still at your side and stand with your feet slightly apart. • Do not cover the flash, AF Assist lamp A, microphone B, or speaker C with your fingers or other objects. • Be careful not to move the camera when you press the shutter button. • Be sure to remove the lens cap when recording.
2. Getting Started/Basic Operations Shutter button (Taking pictures) The shutter button works in two steps. To take a picture, press it. Press the shutter button halfway to focus. A Aperture value B Shutter speed C Focus indication • Aperture value and shutter speed are displayed. (It will flash in red if the correct exposure is not achieved, except when set to flash.) • Once the subject is in focus, the focus indication is displayed. (When the subject is not in focus, the indication flashes) C 3.
2. Getting Started/Basic Operations Displaying a picture right after it is taken MENU > [Custom] > [Auto Review] [Duration Time] Set the length of time that the picture is displayed after taking the still picture. [HOLD]: The pictures are displayed until shutter button is pressed halfway. [5SEC]/[4SEC]/[3SEC]/[2SEC]/[1SEC]/[OFF] [Playback Operation Priority] [ON] Switching the display of the playback screen, deleting pictures, etc. are possible during [Auto Review].
2. Getting Started/Basic Operations Mode dial (Selecting a Recording Mode) Select the mode by rotating the mode dial. • Rotate the mode dial slowly to select the desired mode. Intelligent Auto Mode (P83) The subjects are recorded using settings automatically selected by the camera. Intelligent Auto Plus Mode (P90) Allows you to adjust the brightness and colour hue when in Intelligent Auto Mode. Programme AE Mode (P92) Records at the aperture value and shutter speed set by the camera.
2. Getting Started/Basic Operations Front Dial/Rear Dial Rotating: Selection of items or setting of values is performed during the various settings. • These operating instructions describe operations of the front dial/rear dial as follows: e.g.: When rotating the front dial to the left or right e.g.: When rotating the rear dial to the left or right Allows you to set the aperture, shutter speed, and other settings when in modes.
2. Getting Started/Basic Operations Temporarily changing the items assigned to the front/rear dials ([Dial Operation Switch]) You can temporarily change the items assigned to the front/ rear dials using the function button to which [Dial Operation Switch] is assigned. [Dial Operation Switch] is assigned to [Fn11] at the time of purchase. (P70) A A Function button [Fn11] Scenes and recommended settings Below are examples of recommended front/rear dial assignment settings for scenes.
2. Getting Started/Basic Operations 3 Press [MENU/SET] and set. • When the recording screen is displayed, the original assignment settings for the dials are restored. • You can also complete this step by performing either of the operations below: – Press the shutter button halfway – Press [Fn11] • Items that are temporarily assigned to the front/rear dials can be used only while the guide (step 1 ) or setting screen (step 2 ) is displayed.
2. Getting Started/Basic Operations Cursor buttons/[MENU/SET] button Pressing the cursor button: Selection of items or setting of values etc., is performed. Pressing [MENU/SET]: Confirmation of setting contents, etc., is performed. • These operating instructions expresses the up, down, left, and right of the cursor button as 3/4/2/1.
2. Getting Started/Basic Operations [DISP.] button (Switching the displayed information) Press [DISP.] to switch the information displayed on the screen. ュリヴヱハ In Recording Mode • You can select between [ ] (monitor style) and [ ] (viewfinder style) for each of the monitor and the viewfinder display screen using [Monitor Disp. Style] and [LVF Disp.Style] in the [Custom] menu.
2. Getting Started/Basic Operations ([ ] viewfinder style) • Screen will switch as follows: (Example of display on viewfinder) With information (detailed information)¢ 25p 4:3 L 0 With information (detailed information, tilt sensor display)¢ With information AFS 25p 98 0 4:3 L AFS 0 98 With information (tilt sensor display) 98 0 98 ¢ Histograms are displayed when the [Histogram] of the [Custom] menu is set to [ON].
2. Getting Started/Basic Operations Displaying/not displaying the histogram MENU > [Custom] > [Histogram] > [ON]/[OFF] You can set the position by pressing 3/4/2/1. • Direct touch operation is also possible from the recording screen. • A histogram is a graph that displays brightness along the horizontal axis (black to white) and the number of pixels at each brightness level on the vertical axis. It allows you to easily check a picture’s exposure.
2. Getting Started/Basic Operations ∫ About the tilt sensor display With the tilt sensor displayed, it is easy to correct the tilt of the camera etc. 1 2 Press [DISP.] to display the tilt sensor. Check the tilt of the camera. A Horizontal direction: Correcting tilt to the left B Vertical direction: Correcting downward tilt • When the tilt of the camera is little, the indicator changes to green.
2. Getting Started/Basic Operations In Playback Mode • Screen will switch as follows: Detailed information display¢2 With information¢1 4:3 L 1/98 98 Histogram display¢2 Without information (Highlight display)¢1, 2, 3, 4 60 F3.5 0 AWB ISO 200 WB AFS P F3.5 60 STD. 0 ISO200 10:00 1. DEC.2015 F3.5 60 0 200 AWB 4:3 L s RGB 1/98 100-0001 100-0001 Without information¢4 ¢1 If approximately 1 minute elapses without an operation being performed, the display will disappear. Press [DISP.
2. Getting Started/Basic Operations Displaying/not displaying white saturated areas MENU > [Custom] > [Highlight] > [ON]/[OFF] When the Auto Review function is activated or when playing back, white saturated areas appear blinking in black and white. This does not affect the recorded image. [ON] • If there are any white saturated areas, we recommend compensating the exposure towards negative (P173) referring to the histogram (P53) and then taking the picture again.
2. Getting Started/Basic Operations [LVF] button (Switching the Monitor/Viewfinder) Press [LVF] to switch between the Monitor and Viewfinder. A [LVF] button B Eye sensor [LVF]/[Fn5] button can be used in two ways, as [LVF] or as [Fn5] (function 5). The button can be used as the [LVF] button at the time of purchase. • Refer to P70 for details about the function button. Fn5 ロヷョ Press [LVF].
2. Getting Started/Basic Operations Setting the eye sensor sensitivity and the automatic switching of the display between the Monitor and Viewfinder MENU > [Custom] > [Eye Sensor] [Sensitivity] This will set the sensitivity of the eye sensor. [HIGH]/[LOW] [LVF/Monitor Switch] This will set the method for switching between the monitor and viewfinder.
2. Getting Started/Basic Operations Touch screen (Touch operations) Touch screen of this unit is capacitive. Touch the panel directly with your bare finger. ∫ Touch To touch and release the touch screen. • When selecting features using the touch screen, be sure Fn6 Fn7 to touch the centre of the desired icon. Fn8 Fn9 SNAP Fn10 ∫ Drag A movement without releasing the touch screen. This can also be used to move to the next image during playback, etc.
2. Getting Started/Basic Operations Enabling/disabling the touch operation MENU > [Custom] > [Touch Settings] • When set to [OFF], no corresponding touch tab or touch icon is displayed on the screen. [Touch Screen] [Touch Tab] All touch operations. When set to [OFF], only button and dial operations can be used. [ON]/[OFF] Operation to display the touch icons by touching tabs such as [ ] displayed on the right of the screen.
2. Getting Started/Basic Operations Taking Pictures Using the Touch Function Taking pictures using the Touch Shutter function Applicable modes: Just by touching the subject you want as your point of focus, the camera will focus on the subject and take the picture automatically. 1 Touch [ ]. 2 Touch [ × ]. • Icon will change to [ ], and taking a picture with the Touch Shutter function becomes possible. AE 3 Touch the subject you wish to focus on, and then take a picture.
2. Getting Started/Basic Operations Easily Optimising the Brightness for a Specified Area (Touch AE) Applicable modes: You can easily optimise the brightness for a touched position. When the face of the subject appears dark, you can brighten the screen according to the brightness of the face. 1 Touch [ ]. 2 Touch [ AE ]. • The setting screen for the brightness optimisation position is displayed. • [Metering Mode] is set to [ AE ], which is used AE exclusively for the Touch AE.
2. Getting Started/Basic Operations Setting menu items You can set the menus using two types of operation—touch operations in which you touch the screen, and button operations in which you press the cursor button and rotate the rear dials. In these operating instructions, steps for setting a menu item are described as follows. Example: In the [Rec] menu, change [Quality] from [A] to [›] MENU 1 > [Rec] > [Quality] > [›] Press [MENU/SET].
2. Getting Started/Basic Operations ∫ Switching to other menus e.g.: Switching to the [Setup] menu from [Rec] menu. 1 2 Press 2. Press 3/4 to select a menu selector icon, such as [ ]. • You can also select the menu toggle icons by rotating 3 Press [MENU/SET]. • Select a menu item next and set it. the front dial. (In touch operation) Touch a menu selector icon, such as [ 2 ]. Press 3/4 of the cursor button to select the menu item and press [MENU/SET].
2. Getting Started/Basic Operations ∫ Close the menu Press [ ] or press the shutter button halfway. (In touch operation) Touch [ ]. • When [Menu Information] (P80) in the [Setup] menu is set to [ON], explanations of the menu items and settings are displayed on the menu screen. • If you set [Menu Resume] (P79) in the [Setup] menu to [ON], the screen shows the last selected menu item. It is set to [ON] at the time of purchase.
2. Getting Started/Basic Operations Calling frequently-used menus instantly (Quick Menu) By using the Quick Menu, some of the menu settings can be easily found. • The features that can be adjusted using Quick Menu are determined by the mode or a display style the camera is in. [Q.MENU]/[Fn2] button can be used in two ways, as [Q.MENU] or as [Fn2] (function 2). At the time of purchase, it is initially set to [Q.MENU]. • Refer to P70 for details about the function button. 1 Press [Q.
2. Getting Started/Basic Operations Switching the method for setting Quick Menu items MENU > [Custom] > [Q.MENU] [PRESET]: The default items can be set. [CUSTOM]: The Quick Menu will consist of desired items.
2. Getting Started/Basic Operations Change the Quick Menu to your preferred item When [Q.MENU] (P67) in the [Custom] menu is set to [CUSTOM], the Quick Menu can be changed as desired. Up to 15 items can be set to the Quick Menu. 1 Press 4 to select [ ] and then press [MENU/SET]. AFS 4:3 L 2 3 Press 3/4/2/1 to select the menu item in the top row and then press [MENU/SET]. Press 2/1 to select the empty space in the bottom row and then press [MENU/SET].
2. Getting Started/Basic Operations [Motion Picture] menu – [Snap Movie] (P251) – [Motion Pic. Set] – [Picture Mode] (P249) ([Rec Format] (P246)/[Rec Quality] (P246)) [Custom] menu – [Silent Mode] (P212) – [Peaking] (P170) – [Histogram] (P53) – [Guide Line] (P53) – [Zebra Pattern] (P220) 4 – [Monochrome Live View] (P221) – [Rec Area] (P243) – [Step Zoom] (P228) – [Zoom Speed] (P228) – [Touch Screen] (P60) Press [ ]. • It will return to screen of step 1.
2. Getting Started/Basic Operations Assigning frequently used functions to the buttons (function buttons) You can assign recording functions, etc. to specific buttons and icons. 1 Select the menu. (P63) MENU 2 3 4 > [Custom] > [Fn Button Set] Press 3/4 to select [Setting in REC mode] or [Setting in PLAY mode] and then press [MENU/SET]. Press 3/4 to select the function button you want to assign a function to and then press [MENU/SET].
2. Getting Started/Basic Operations [Motion Picture] menu – [Snap Movie] (P251): [Fn9]¢ – [Motion Pic. Set] – [Picture Mode] (P249) – [Mic.
2. Getting Started/Basic Operations • Some functions cannot be used depending on the mode or displayed screen. • When using [Ex. Tele Conv.] (still pictures), check that [Picture Size] is set to [M] or [S]. • When set to [Focus Area Set], it is possible to display the position setting screen of either AF area or MF Assist. • Operations of the cursor button and [MENU/SET] are disabled when [Cursor Button Lock] is set. Press the function button again to enable them.
2. Getting Started/Basic Operations Configuring basic settings of this unit (Setup Menu) For details on how to select the [Setup] menu settings, refer to P63. [Clock Set] and [Economy] are important items. Check their settings before using the camera. — [Clock Set] • Refer to P41 for details. Set the time in your home area and travel destination. You can display the local times at the travel destinations and record them on the pictures you take. • Set [Home] first thing after purchasing.
2. Getting Started/Basic Operations Departure date and return date of the trip as well as the name of the travel destination can be set. You can display the number of days that have passed when playing back the pictures and stamp it on the recorded pictures with [Text Stamp] (P276). [Travel Setup]: [SET]: Departure date and return date are set. Elapsed days (how many days after) of the trip are recorded.
2. Getting Started/Basic Operations This allows you to set the volume for electronic sound and the electronic shutter sound. [Beep Volume]: [Beep] [E-Shutter Vol]: [u] (High) [ ] (High) [t] (Low) [ ] (Low) [s] (OFF) [ ] (OFF) [E-Shutter Tone]: [ 1 ]/[ 2 ]/[ 3 ] • When [Silent Mode] is set to [ON], [Beep Volume] and [E-Shutter Vol] is set to [OFF]. Set the frame rate of the recording screen (Live View screen). [Live View Mode] [30fps]: Reduces the power consumption, extending the operating time.
2. Getting Started/Basic Operations Brightness, colour, or red or blue tint of the Monitor/viewfinder is adjusted. [ ] ([Brightness]): Adjust the brightness. [ [Monitor Display]/ [Viewfinder] ] ([Contrast]): Adjust the contrast. [ ] ([Saturation]): Adjust the clarity of colours. [ ] ([Red Tint]): Adjust the red tint. [ ] ([Blue Tint]): Adjust the blue tint. 1 2 Select the settings by pressing 3/4, and adjust with 2/1. • Adjusting can also be performed by rotating the rear dial.
2. Getting Started/Basic Operations The unit can be set up to prevent unnecessary battery consumption. [Economy] [Sleep Mode]: The camera is automatically turned off if the camera has not been used for the time selected on the setting. [10MIN.]/[5MIN.]/[2MIN.]/[1MIN.]/[OFF] [Auto LVF/Monitor Off]: The monitor/viewfinder is automatically turned off if the camera has not been used for the time selected on the setting. [5MIN.]/[2MIN.]/[1MIN.
2. Getting Started/Basic Operations This sets how the unit connects to a television etc. [Video Out]: Set to match the colour television system in each country. [NTSC]: Video output is set to NTSC system. [PAL]: Video output is set to PAL system. • This will operate when the AV cable (optional) or HDMI micro cable is connected. [TV Aspect]: Set to match the type of TV. [16:9]: When connecting to a 16:9 screen TV. [4:3]: When connecting to a 4:3 screen TV.
2. Getting Started/Basic Operations [HDMI Info Display (Rec)]: Set whether or not to display information when recording an image on the camera while monitoring it on a TV. [ON]: The camera display is output as is. [OFF]: Only images are output. • This will work when the HDMI micro cable is connected. • When the camera is connected to a TV, lower the volume of the TV. [3D Playback]: Set the output method for 3D pictures. [ ]: Set when connecting to a 3D compatible television.
2. Getting Started/Basic Operations [Menu Information] Explanations of the menu items and settings are displayed on the menu screen. [ON]/[OFF] [Language] Set the language displayed on the screen. • If you set a different language by mistake, select [~] from the menu icons to set the desired language. — [Version Disp.] • This enables the firmware versions of the camera and lens to be checked. • Press [MENU/SET] on the version display screen to display information about the software on the unit.
2. Getting Started/Basic Operations [Reset Wi-Fi Settings] Reset all settings in the [Wi-Fi] menu to factory default settings. (Excluding [LUMIX CLUB] (P327)) • Always reset the camera when disposing or selling it to prevent personal information saved within the camera from being misused. • Always reset the camera after making a copy of personal information when sending the camera in to be repaired. [Pixel Refresh] It will perform optimisation of imaging device and image processing.
2. Getting Started/Basic Operations Entering Text It is possible to enter babies’ and pets’ names and the locations when recording. When a screen that looks like the one on the right is displayed, you can enter characters. (Only alphabetical characters and symbols can be entered.) • Example of operation for displaying a screen: MENU 1 > [Rec] > [Profile Setup] > [SET] > [Baby1] > [Name] > [SET] Press 3/4/2/1 to select text and then press [MENU/SET] to register.
3. Recording Modes Taking Pictures using the Automatic Function (Intelligent Auto Mode) Recording Mode: In this mode, the camera makes the optimal settings for the subject and scene, so we recommend it when you wish to leave the settings to the camera and record without thinking about them.
3. Recording Modes 1 Set the mode dial to [¦]. • The camera will switch to either the most recently used of Intelligent Auto Mode or Intelligent Auto Plus Mode. At the time of purchase, the mode is set to Intelligent Auto Plus Mode. (P90) 2 Align the screen with the subject. • When the camera identifies the optimum scene, the icon of the scene concerned is displayed in blue for 2 seconds, after which its colour changes to the usual red.
3. Recording Modes ∫ Auto Focus, Face/Eye Detection , and Face Recognition The Auto Focus Mode is automatically set to [š]. If you touch the subject, the AF tracking function will work. The AF tracking function will also work if you press 2 and then press the shutter button halfway. (About tracking AF, refer to P154 for details.) • When [ ], [ ], or [ ] is set, an eye closer to the camera will be in focus, while the exposure will be optimised for the face.
3. Recording Modes Recording night scenes ([iHandheld Night Shot]) Recording Mode: When [iHandheld Night Shot] is set to [ON] and [ ] is detected while taking handheld night shots, pictures of the night scenery will be taken at a high burst speed and composed into a single picture. This mode is useful if you want to take stunning night shots with minimal jitter and noise, without using a tripod. MENU > [Rec] > [iHandheld Night Shot] > [ON]/[OFF] • The angle of view will be slightly narrower.
3. Recording Modes Combining pictures into a single picture with rich gradation ([iHDR]) Recording Mode: When [iHDR] is set to [ON] and there is, for example, strong contrast between the background and the subject, multiple still pictures are recorded with differing exposures and combined to create a single still picture rich in gradation. [iHDR] works automatically as needed. When it does, [ ] is displayed on the screen. MENU > [Rec] > [iHDR] > [ON]/[OFF] • The angle of view will be slightly narrower.
3. Recording Modes Taking a picture with a blurred background (Defocus Control) Recording Mode: You can easily set the blurriness of the background while checking the screen. 1 2 Press [Fn4] to display the setting screen. Set the blurriness by rotating the rear dial. SS F Strong defocus 500 250 125 60 30 4.0 5.6 8.0 Weak defocus • If you press [MENU/SET], you can return to the recording screen. ∫ When operating the touch screen 1 Touch [ 2 Touch [ ]. ] to display the setting screen.
3. Recording Modes Recording images by changing the brightness or colour tone Recording Mode: This mode enables you to change the brightness and colour tone to your preferred settings from the ones set by the camera. Setting brightness 1 2 Press [ ]. Rotate the rear dial to adjust brightness. • Press [ ] again to return to the recording screen. +1 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 0 +5 Setting colour 1 2 Press 1 to display the setting screen. Rotate the rear dial to adjust colour.
3. Recording Modes About Intelligent Auto Plus Mode and Intelligent Auto Mode ∫ Switching between Intelligent Auto Plus Mode and Intelligent Auto Mode 1 Press [MENU/SET]. 2 3 4 Press 2. Press 3/4 to select the [ ] or [ ] tab. Press 1 to select [ ] or [ ] and then press [MENU/SET]. • If [DISP.] is pressed, the description of the selected mode will be displayed. It is also possible to display the selection screen by touching the Recording Mode icon in recording screen.
3. Recording Modes ∫ Menus that can be set Only the following menus can be set. Intelligent Auto Plus Mode Menu Item [Rec] [Photo Style]/[Aspect Ratio]/[Picture Size]/[Quality]/[AFS/AFF]/[Burst Rate]/ [4K PHOTO]/[Auto Bracket]/[Self Timer]/[Time Lapse/Animation]/ [iHandheld Night Shot]/[iHDR]/[Electronic Shutter]/[Shutter Delay]/[Ex. Tele Conv.]/[Color Space]/[Stabilizer]/[Face Recog.
3. Recording Modes Taking Pictures with Automatically Adjusted Aperture and Shutter Speed (Programme AE Mode) Recording Mode: The camera automatically sets the shutter speed and the aperture value according to the brightness of the subject. You can take pictures with greater freedom by changing various settings in the [Rec] menu. 1 2 Set the mode dial to [ ]. Press the shutter button halfway and display the aperture value and shutter speed value on the screen. 3.
3. Recording Modes Programme Shift In Programme AE Mode, you can change the preset aperture value and shutter speed without changing the exposure. This is called Programme Shift. You can make the background more blurred by decreasing the aperture value or record a moving subject more dynamically by slowing the shutter speed when taking a picture in Programme AE Mode. 1 2 Press the shutter button halfway and display the aperture value and shutter speed value on the screen.
3. Recording Modes Example of Programme Shift [When the interchangeable lens (H-FS1442A) is used] 㸫1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 㸦(Y㸧 2 17 2.8 18 4 19 (A) 5.6 20 8 21 11 22 16 23 22 4 2 1 1/2 1/4 1/8 1/15 1/30 1/60 1/125 1/250 1/500 1/1000 1/2000 1/4000 1/8000 1/16000 (B) (A): Aperture value (B): Shutter speed 1 Programme Shift line chart Represents the aperture and shutter speed set automatically by the camera at each exposure value.
3. Recording Modes Taking Pictures by Specifying the Aperture/ Shutter Speed Recording Mode: • The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check on the recording screen, please use [Preview]. (P100) • The brightness of the screen and the recorded pictures may differ. Check the pictures on the playback screen.
3. Recording Modes Shutter-Priority AE Mode When you set the shutter speed, the camera automatically optimises the aperture value for the brightness of the subject. When you want to take a sharp picture of a fast moving subject, set with a faster shutter speed. When you want to create a trail effect, set to a slower shutter speed. 1 2 Set the mode dial to [ ]. Set the shutter speed by rotating the rear dial or the front dial. A Shutter speed B Exposure meter SS F 60 8.0 125 5.6 250 500 1000 4.
3. Recording Modes Manual Exposure Mode Determine the exposure by manually setting the aperture value and the shutter speed. The Manual Exposure Assistance appears on the lower portion of the screen to indicate the exposure. 1 2 Set the mode dial to [ ]. A Rotate the rear dial to set the shutter speed, and rotate the front dial to set the aperture value. A B C D Exposure meter Aperture value Shutter speed Manual Exposure Assistance SS F 8 15 30 60 125 4.0 5.6 8.0 11 5.
3. Recording Modes Optimising the ISO sensitivity for the shutter speed and aperture value When the ISO sensitivity is set to [AUTO], the camera sets the ISO sensitivity automatically so that the exposure will be appropriate for the shutter speed and aperture value. • Depending on recording conditions, an appropriate exposure may not be set or the ISO sensitivity may become higher. Manual Exposure Assistance 0 −3 0 The exposure is adequate. +3 Set to faster shutter speed or larger aperture value.
3. Recording Modes Checking/not checking the effects of aperture and shutter speed on the recording screen MENU > [Custom] > [Constant Preview] > [ON]/[OFF] • This function does not work when using the flash. Close the flash. • It can only be used with Manual Exposure Mode. • Rotate the front/rear dial to display the Exposure Meter. Unsuitable areas of the range are displayed in red.
3. Recording Modes Confirm the Effects of Aperture and Shutter Speed (Preview Mode) Applicable modes: The effects of aperture and shutter speed can be checked by using the Preview Mode. • Confirm the effects of aperture: You can check the depth of field (effective focus range) before taking a picture by closing the leaf shutter to the aperture value you set. • Confirm the effects of shutter speed: Movement can be confirmed by displaying the actual picture that will be taken with that shutter speed.
3. Recording Modes Easily set aperture/shutter speed for suitable exposure (One Push AE) Applicable modes: When the exposure setting is too bright or too dark, you can use one push AE to achieve a suitable exposure setting. How to tell if the exposure is not adequate • If the aperture values and shutter speed blink red A when the shutter button is pressed halfway. • If the Manual Exposure Assistance is anything other than 3.5 4000 when in Manual Exposure mode.
3. Recording Modes Taking panorama pictures (Panorama Shot Mode) Recording Mode: Consecutive photos taken while the camera is moved are combined to form a panorama. 1 Set the mode dial to [ ]. • After the screen that asks you to check the recording direction is displayed, the horizontal/vertical guidelines will be displayed. 2 3 Press the shutter button halfway to focus. Press the shutter button fully and move the camera in a small circle in the direction of the arrow on the screen.
3. Recording Modes 4 Press the shutter button once again to end the picture recording. • Recording can also be ended by keeping the camera still while recording. • Recording can also be ended by moving the camera to the end of the guide. ∫ Changing the recording direction and angle of view (image size) of panorama pictures MENU > [Rec]>[Panorama Settings] Sets the recording direction.
3. Recording Modes ∫ About playback Pressing 3 will start scrolling playback automatically in the same direction as the recording. • The following operations can be performed during scrolling 1/98 playback. 3 Start panorama playback/Pause¢ 4 Stop ¢ When the playback is paused, you can scroll forwards and backwards by dragging the screen. When the scroll bar is touched, the playback position jumps to the touched position.
3. Recording Modes Taking Pictures that match the Scene being recorded (Scene Guide Mode) Recording Mode: If you select a scene to suit the subject and recording conditions with reference to the example images, the camera will set optimal exposure, colour, and focus, allowing you to record in a manner appropriate to the scene. 1 2 Set the mode dial to [ ]. Press 2/1 to select the scene. • The scene can also be selected by dragging an example image or the slide bar. 3 Press [MENU/SET] to set.
3. Recording Modes ∫ Switching the scene selection screen display Press [DISP.] to switch the monitor screen. • When it is set to the guide display, tips for creating picture effects suitable for each scene, etc. is displayed. Normal display Guide display List display Displaying/not displaying the selection screen when the mode dial is switched to / . MENU > [Custom] > [Menu Guide] [ON]: Displays the selection screen for the Scene Guide or the Creative Control Mode.
3. Recording Modes For details on “Scene Guide Mode” settings, refer to P105. [Clear Portrait] The brightness of the face is adjusted and the background is defocused to create a clear portrait. Tips • If you are using a lens with the zoom function, you can enhance the effect by zooming in as much as possible and closing the distance between the camera and the subject. [Silky Skin] Brighter face and softer skin colour creates a healthy younger look.
3. Recording Modes [Clear in Backlight] Outdoors, the flash will be used to more evenly illuminate the subject’s face. Tips • Open the flash. (You can set to [ ‰ ].) • White saturation can occur if the subject is too close. • Flash pictures taken closer or beyond the flash’s rated distance may appear too bright or too dark. • When [Silent Mode] is set to [ON], the flash is not activated. [Relaxing Tone] The warm colour tone creates an image with a relaxing mood.
3. Recording Modes [Distinct Scenery] Saturation of sky and trees creates more distinct scenery. [Bright Blue Sky] On a sunny day, the overall screen brightness is increased to create a vibrant image of the blue sky. [Romantic Sunset Glow] The enhanced purple tone creates a romantic image of the sky just after sunset.
3. Recording Modes [Vivid Sunset Glow] Red is enhanced to create a vivid image of the sunset. [Glistening Water] The glisten of the water is enhanced to look brighter and slightly bluish. • Display of the recording screen will be delayed more than usual and the screen will look as if frames are dropping. • Star filter used in this mode may cause glistening effects on the objects other than water surface. [Clear Nightscape] Colour saturation of the night light is increased to accentuate the nightscape.
3. Recording Modes [Cool Night Sky] Blue tones are enhanced to create a cool and sophisticated image of the night sky after sunset. Tips • We recommend using a tripod and the self-timer. • The shutter may remain closed after taking the picture. This is due to signal processing and is not a malfunction. • Noise may become visible when you take pictures in dark places. [Warm Glowing Nightscape] The warm colour tone creates a warm image of the nightscape.
3. Recording Modes [Glittering Illuminations] The star filter enhances pinpoints of light. Tips • We recommend using a tripod and the self-timer. • Display of the recording screen will be delayed more than usual and the screen will look as if frames are dropping. • The shutter may remain closed after taking the picture. This is due to signal processing and is not a malfunction. • Noise may become visible when you take pictures in dark places.
3. Recording Modes [Soft Image of a Flower] The soft focus creates a diffused image. Tips • We recommend using a tripod and the self-timer. • For close-up recording, we recommend that you close the flash and avoid using it. • Display of the recording screen will be delayed more than usual and the screen will look as if frames are dropping. • The focus range is different depending on lens used. Refer to “About the focus distance reference mark” on P168 for the focus range.
3. Recording Modes [Cute Dessert] The overall screen brightness is set higher to enhance the cuteness of the dessert. Tips • If you are using a lens with the zoom function, you can enhance the effect by zooming in as much as possible and closing the distance between the camera and the subject. • We recommend using a tripod and the self-timer. • For close-up recording, we recommend that you close the flash and avoid using it.
3. Recording Modes Taking Pictures with different image effects (Creative Control Mode) Recording Mode: This mode records with additional image effects. You can set the effects to add by selecting example images and checking them on the screen. 1 2 Set the mode dial to [ ]. Press 3/4 to select the image effects (filters). • The image effect of the selected example image will be applied in a preview display A. • You can also select the image effects (filters) by touching the example images.
3. Recording Modes ∫ Switching the image effect (filter) selection screen display Press [DISP.] to switch the monitor screen. • When the image effect selection screen display is set to the guide display, description of the selected image effect is displayed. Normal display Guide display List display • If you select the [ ] tab on the menu screen, you can select the following menu items: – [Filter Select]: Displays the image effect (filter) selection screen.
3. Recording Modes Taking a picture with a blurred background (Defocus Control) You can easily set the blurriness of the background while checking the screen. 1 2 Press [Fn4] to display the setting screen. Rotate the rear dial to set. • If you press [MENU/SET], you can return to the recording screen. • Pressing [Fn4] on the blurriness setting screen will cancel SS F the setting. 500 250 125 60 30 4.0 5.6 8.
3. Recording Modes For details on “Creative Control Mode” settings, refer to P115. [Expressive] This effect emphasises the colour to make a pop art picture. Items that can be set Freshness Understated colours Pop colours [Retro] This effect gives a faded image. Items that can be set Colour Yellow emphasised Red emphasised [Old Days] This effect adds a bright, soft and nostalgic feel to the overall image.
3. Recording Modes [Low Key] This effect adds a dark and relaxing feel to the overall image and enhances bright parts. Items that can be set Colour Red emphasised Blue emphasised [Sepia] This effect creates a sepia image. Items that can be set Contrast Low contrast High contrast [Monochrome] This effect creates a black and white picture.
3. Recording Modes [Rough Monochrome] This effect creates a black and white picture with granular noise. Items that can be set Grittiness Less gritty Grittier • Display of the recording screen will be delayed more than usual and the screen will look as if frames are dropping. [Silky Monochrome] This effect blurs the overall image to add a soft feel to a black and white picture.
3. Recording Modes [Cross Process] This effect gives your photo a dramatic colour look. Items that can be set Colour Green tone/Blue tone/Yellow tone/Red tone • Select the desired colour tone by rotating the rear dial, and then press [MENU/SET]. [Toy Effect] This effect reduces peripheral brightness to give the impression of a toy camera. Items that can be set Orange emphasised Colour Blue emphasised [Toy Pop] This effect creates a vivid and bright image with the look of a toy camera.
3. Recording Modes [Miniature Effect] This effect blurs peripheral areas to give the impression of a diorama. Items that can be set Freshness Understated colours Pop colours ∫ Setting the type of defocus With [Miniature Effect] you can make the subject stand out by intentionally creating defocused and in-focus portions. You can set the recording orientation (defocus orientation) and the position and size of the in-focus portion. 1 Press [Fn4] to display the setting screen.
3. Recording Modes [Soft Focus] This effect blurs the overall image to produce a soft feel. Items that can be set Extent of defocus Weak defocus Strong defocus • Display of the recording screen will be delayed more than usual and the screen will look as if frames are dropping. [Fantasy] This effect creates a fantastical image in a pale colour tone.
3. Recording Modes [One Point Color] This effect leaves one selected colour to emphasise impressiveness. Items that can be set Amount of colour left Small amount of colour Large amount of colour ∫ Set the colour to leave in Set the colour to leave in by selecting a location on the screen. 1 Press [Fn4] to display the setting screen. • Setting screen can also be displayed by touching in order of [ 2 Select the colour you want to leave by moving the frame with 3/4/2/1.
3. Recording Modes [Sunshine] This effect adds a cast of light to the scene. Items that can be set Colour Yellow tone/Red tone/Blue tone/White tone • Select the colour tone by rotating the rear dial, and then press [MENU/SET]. ∫ Setting the light source You can change the position and size of the light source. 1 2 Press [Fn4] to display the setting screen. • Setting screen can also be displayed by touching in order of [ ] then [ ]. Press 3/4/2/1 to move the centre position of the light source.
3. Recording Modes Recording motion pictures with manually set aperture value/shutter speed (Creative Video Mode) Recording Mode: It is possible to manually change the aperture and shutter speed and record motion pictures. 1 2 Set the mode dial to [ Select the menu. (P63) MENU 3 ]. > [Motion Picture] > [Exposure Mode] Press 3/4 to select [P], [A], [S] or [M], and then press [MENU/SET].
3. Recording Modes Minimising operational sounds during motion picture recording The operational sound of the zoom or button operation may be recorded when it is operated during the recording of a motion picture. Using touch icons allows silent operation while recording motion pictures. Select the menu. (P63) MENU 1 2 3 > [Motion Picture] > [Silent Operation] > [ON] Start recording. Touch [ ]. Touch icon.
3. Recording Modes Registering your preferred settings (Custom Mode) Recording Mode: You can register the current camera settings as custom settings. If you then record in Custom Mode, you can use the registered settings. • Initial setting of the Programme AE Mode is registered as the custom settings initially. Registering Personal Menu Settings (Registering custom settings) To allow recording using the same settings, up to 3 sets of current camera settings can be registered using [Cust.Set Mem.].
3. Recording Modes Recording using registered custom set You can easily call up the settings you have registered using [Cust.Set Mem.]. Set the mode dial to [ ] • The custom set you used last time ([ ], [ ], or [ ]) will be called up. ∫ To change a custom set 1 2 3 Set the mode dial to [ ]. Press [MENU/SET] to display the menu. Press 2/1 to select the custom setting you want to use, and then press [MENU/SET].
4. Picture Quality and Colour Tone Settings Adjusting the Picture Quality by Adding an Effect ([Photo Style]) Applicable modes: You can select effects to match the type of image you wish to record. It is possible to adjust the items such as colour or picture quality of the effect to your desire. MENU > [Rec] > [Photo Style] [Standard] This is the standard setting. [Vivid]¢1 Brilliant effect with high saturation and contrast. [Natural]¢1 Soft effect with low saturation.
4. Picture Quality and Colour Tone Settings ∫ Adjusting the picture quality • Picture quality cannot be adjusted in the Intelligent Auto Plus Mode. 1 2 Press 2/1 to select the type of Photo Style. Press 3/4 to select the items, and then press 2/1 to adjust. 6WDQGDUG -5 0 +5 ±0 S ±0 ±0 ±0 DISP.カスタム登録 [r] Increases the difference between the brightness and the darkness in the picture. [s] Decreases the difference between the brightness and the darkness in the picture.
4. Picture Quality and Colour Tone Settings Recording Images with Image Effects ([Filter Settings]) Applicable modes: You can apply image effects (filters) that are available for Creative Control Mode to images in other modes, such as Aperture-Priority AE Mode or Panorama Shot Mode. MENU > [Rec] > [Filter Settings] > [Filter Select] • You can apply image effects that are available for Creative No Effect Control Mode by performing the same operations as those for Creative Control Mode.
4. Picture Quality and Colour Tone Settings • [Rough Monochrome]/[Silky Monochrome]/[Miniature Effect]¢/[Soft Focus]/[Star Filter]/ [Sunshine] are not available in the following cases. – Creative Video Mode – When recording motion pictures – When recording 4K photos ¢ In Creative Video Mode or when recording motion pictures, this item is not available only if the motion picture size is set to [4K] in [Rec Quality].
4. Picture Quality and Colour Tone Settings Taking a picture with and without an image effect simultaneously ([Simultaneous record w/o filter]) You can press the shutter button once and take two pictures simultaneously, one with an image effect and the other one without it. MENU > [Rec] > [Filter Settings] > [Simultaneous record w/o filter] Settings: [ON]/[OFF] • When this item is set to [ON], a picture with an image effect will be taken first, followed by a picture without it.
4. Picture Quality and Colour Tone Settings Adjusting Bright/Dark Portions ([Highlight Shadow]) Applicable modes: You can adjust the brightness of bright and dark portions on an image while checking the brightness on the screen. 1 Select the menu. (P63) MENU 2 [Rec] > [Highlight Shadow] Press 2/1 to select the item. ヤヒ 3 > (Standard) A state with no adjustments is set. (Raise the contrast) Bright areas are brightened, and dark areas are darkened.
4. Picture Quality and Colour Tone Settings Adjusting the White Balance Applicable modes: In sunlight, under incandescent lights or in other such conditions where the colour of white takes on a reddish or bluish tinge, this item adjusts to the colour of white which is closest to what is seen by the eye in accordance with the light source. 1 Press 1 ( ). リヴヰ ョㄏピ 2 Rotate the rear dial or front dial to select the White Balance.
4. Picture Quality and Colour Tone Settings [ ] You can set the colour temperature manually for 6500K taking natural pictures in different lighting conditions. The colour of light is measured as a number in degrees Kelvin. As the colour temperature increases, the picture becomes more bluish. As the colour temperature decreases, the picture becomes more reddish. 1 Press 3 2 Press 3/4 to select the colour temperature and then press [MENU/SET]. • You can set a colour temperature from [2500K] to [10000K].
4. Picture Quality and Colour Tone Settings ∫ Auto White Balance Depending on the conditions prevailing when pictures are taken, the pictures may take on a reddish or bluish tinge. Furthermore, when a multiple number of light sources are being used or there is nothing with a colour close to white, Auto White Balance may not function properly. In a case like this, set the White Balance to a mode other than [AWB]. 1 Auto White Balance will work within this range.
4. Picture Quality and Colour Tone Settings White Balance Bracket Bracket setting is performed based on the adjustment values for the White Balance fine adjustment, and 3 pictures with different colours are automatically recorded when the shutter button is pressed once. 1 2 Fine-adjust the White Balance in step 2 of “Finely adjusting the White Balance” and then perform the bracket setting by rotating the rear dial.
4. Picture Quality and Colour Tone Settings Setting the Picture Quality and Size Setting the aspect ratio of pictures Applicable modes: This allows you to select the aspect ratio of the pictures to suit printing or the playback method. MENU > [Rec] > [Aspect Ratio] [4:3] [Aspect Ratio] of a 4:3 TV [3:2] [Aspect Ratio] of a 35 mm film camera [16:9] [Aspect Ratio] of a high-definition TV, etc.
4. Picture Quality and Colour Tone Settings • When [Ex. Tele Conv.] (P225) is set, [ ] is displayed on the picture sizes of each aspect ratio except for [L]. • The picture size will be fixed to [S] when [Burst Rate] is set to [SH]. • The picture size will be fixed to [4K] ([4:3]: 3328k2496; [3:2]: 3504k2336; [16:9]: 3840k2160; [1:1]: 2880k2880) when recording 4K photos. Setting the compression rate of pictures ([Quality]) Applicable modes: Set the compression rate at which the pictures are to be stored.
4. Picture Quality and Colour Tone Settings • The setting is fixed to [A] when recording 4K photos. Not available in these cases: • The following effects are not reflected in RAW images: – Intelligent Auto Plus Mode – Scene Guide Mode – Creative Control Mode – White Balance – [Photo Style]¢1/[Highlight Shadow]¢1/[i.Dynamic]¢1/[Red-Eye Removal]¢2/[i.
4. Picture Quality and Colour Tone Settings Using Image Correction Functions Compensating the contrast and exposure ([i.Dynamic]) Applicable modes: Contrast and exposure are compensated when the brightness difference between the background and subject is great, etc. MENU > [Rec] > [i.Dynamic] Settings: [AUTO]/[HIGH]/[STANDARD]/[LOW]/[OFF] • [AUTO] automatically sets the intensity of the effect according to the recording conditions.
4. Picture Quality and Colour Tone Settings Combining pictures with different exposures ([HDR]) Applicable modes: You can combine 3 pictures with different levels of exposure into a single picture with rich gradation. You can minimise the loss of gradations in bright areas and dark areas when, for example, the contrast between the background and the subject is large. An image combined by HDR is recorded in JPEG. MENU > [Rec] > [HDR] [ON] Records HDR pictures. [OFF] Does not record HDR pictures.
4. Picture Quality and Colour Tone Settings Reducing the long shutter noise ([Long Shtr NR]) Applicable modes: The camera automatically removes noise that appears when the shutter speed becomes slower to take pictures of night scenery etc. so you can take beautiful pictures. MENU > [Rec] > [Long Shtr NR] Settings: [ON]/[OFF] • [Long shutter noise reduction ongoing] is displayed for the same time as the shutter speed for signal processing.
4. Picture Quality and Colour Tone Settings Raising the resolution when the aperture is closed ([Diffraction Compensation]) Applicable modes: The camera raises the resolution by correcting the blurriness caused by diffraction when the aperture is closed. MENU > [Rec] > [Diffraction Compensation] Settings: [AUTO]/[OFF] • This feature may be automatically disabled, depending on the recording conditions. • Noise may stand out with higher ISO sensitivity.
5. Focus and Brightness (Exposure) Settings Adjusting Focus Automatically By setting the optimum Focus Mode or Auto Focus Mode for the subject or recording condition, you can let the camera automatically adjust focus in various scenes. 1 Set the focus mode lever to [AFS/AFF] or [AFC]. • The Focus Mode will be set. (P149) 2 3 Press 2 ( AFS/ AFF AFC MF ). リヴヰ Press 2/1 to select AF Mode and then press [MENU/SET]. ョㄏピ • The Auto Focus Mode will be set.
5. Focus and Brightness (Exposure) Settings • If the camera detects stars in the night sky after displaying [ LOW ], Starlight AF will be activated. When focus is achieved, the focus indication [ STAR ] and AF areas in focus are displayed. (Detection with Starlight AF works only for approximately 1/3 of the centre area of the screen.) • If you zoom in/out after focusing on a subject, the focus may lose its accuracy. In that case, re-adjust the focus. • When the Focus Mode is set to [AFF] or [AFC].
5. Focus and Brightness (Exposure) Settings Selecting the Focus Mode (AFS/AFF/AFC) Applicable modes: The method for achieving focus when the shutter button is pressed halfway is set. Set the focus mode lever to [AFS/AFF] or [AFC]. AFS/ AFF AFC MF Item The movement of the subject and the scene (recommended) [AFS] Subject is still (Auto (Scenery, anniversary Focus photograph, etc.) Single) [AFS/ AFF] [AFF] Movement cannot be (Auto predicted Focus (Children, pets, etc.
5. Focus and Brightness (Exposure) Settings ∫ About [AFS/AFF] of the focus mode lever In [AFS/AFF] in the [Rec] menu or the [Motion Picture] menu, you can assign [AFS] or [AFF] to [AFS/AFF] of the focus mode lever. When recording using [AFF], [AFC] • It may take time to focus on the subject when you operate the zoom from Wide to Tele or suddenly change the subject from a distant one to a nearby one. • Press the shutter button halfway again when it is difficult to focus on the subject.
5. Focus and Brightness (Exposure) Settings Selecting the Auto Focus Mode Applicable modes: This allows the focusing method that suits the positions and number of the subjects to be selected. 1 Press 2 ( ). リヴヰ ョㄏピ 2 Press 2/1 to select AF Mode and then press [MENU/SET]. ([Face/Eye Detection]) ([Tracking]) ([49-Area]) , etc. ([Custom Multi]) The camera automatically detects the person’s face and eyes.
5. Focus and Brightness (Exposure) Settings ([1-Area]) ([Pinpoint]) The camera focuses on the subject in the AF area on the screen. • Position and size of the AF area can be changed. (P158) You can achieve a more precise focus on a point that is smaller than [Ø]. If you press the shutter button halfway, the screen that lets you check the focus will be enlarged. • The focus position can be set on an enlarged screen.
5. Focus and Brightness (Exposure) Settings ([Tracking]) •[ ] cannot be used with [Time Lapse Shot]. • In the following cases, [ ] operates as [Ø].
5. Focus and Brightness (Exposure) Settings Locking the subject to be tracked ( [Tracking]) Button operation Aim the AF tracking frame over the subject, and press the shutter button halfway. A AF tracking frame • AF area will turn green when the camera detects the subject. • The AF area turns yellow when the shutter button is released. • Lock is cancelled when [MENU/SET] is pressed. A Touch operation Touch the subject. • Perform the operation after cancelling the touch shutter function.
5. Focus and Brightness (Exposure) Settings Setting the shape of the AF area ([Custom Multi]) Selecting from 49 AF areas, you can freely set the optimum shape of the AF area for the subject. 1 2 3 Press 2 ( ). Select a Custom Multi icon ([ ], etc.), and press 3. • If you press 4, the AF area setting screen will be displayed. Press 2/1 to select a setting. • The current shape of the AF area A is displayed on the FREE bottom left of the screen.
5. Focus and Brightness (Exposure) Settings When selecting [ ]/[ ] When [ ] is selected, you can change the vertical size and position; when [ ] is selected, you can change the horizontal size and position. Button operation Touch operation 3/4/2/1 Touching / Pinching in/out [DISP.
5. Focus and Brightness (Exposure) Settings Setting up position of the AF area/changing size of the AF area Applicable modes: When [š], [ ], [Ø], or [ ] in Auto Focus Mode is selected, you can change the position and size of the AF area. • Perform the operation after cancelling the touch shutter function. • When setting with touch operation, set [Touch AF] in [Touch Settings] of the [Custom] menu to [AF].
5. Focus and Brightness (Exposure) Settings When selecting [š], [Ø] Position and size of the AF area can be changed. 1 2 Press 2 ( ). Select [š] or [Ø] and press 4. • AF area setting screen is displayed. • You can also display the AF area setting screen by touching the screen. 3 Change the position and size of the AF area. Button operation Touch operation 3/4/2/1 Touching Description of operation Moves the AF area. Pinching out/in Enlarges/reduces the AF area in small steps. s [DISP.
5. Focus and Brightness (Exposure) Settings When selecting [ ] You can set the focus position precisely by enlarging the screen. • The focus position cannot be set at the edge of the screen. 1 2 3 Press 2 ( ). Select [ ] and press 4. Press 3/4/2/1 to set the focus position and then press [MENU/SET]. • The assist screen for setting the focus position is displayed in an enlarged size. • The assist screen can also be displayed by touching the 4 subject. Move [+] to the position to be in focus.
5. Focus and Brightness (Exposure) Settings Setting the AF area position with the Touch Pad Applicable modes: By setting [Touch Pad AF] in [Touch Settings] (P60) in the [Custom] menu, you can move the AF area displayed on the viewfinder by touching the monitor. • If you touch the monitor when the Auto Focus Mode is set to [Custom Multi] such as [ displayed.
5. Focus and Brightness (Exposure) Settings Optimising the focus and brightness for a touched position Applicable modes: By setting [Touch AF] (P60) in [Touch Settings] of the [Custom] menu to [AF+AE], you can optimise the focus and brightness for the position you have touched. 1 Select the menu. (P63) MENU 2 3 > [Custom] > [Touch Settings] > [Touch AF] Press 3/4 to select [AF+AE], and press [MENU/SET]. Touch the subject you want to optimise the brightness for. • AF area setting screen is displayed.
5. Focus and Brightness (Exposure) Settings • When recording with the Touch Shutter, the focus and brightness are optimised for the touched position before recording takes place. • At the edge of the screen, the metering may be affected by the brightness around the touched location. Not available in these cases: • [AF+AE], which optimises the focus and brightness, does not work in the following cases.
5. Focus and Brightness (Exposure) Settings Turning on/not turning on the AF Assist Lamp MENU > [Custom] > [AF Assist Lamp] > [ON]/[OFF] AF assist lamp will illuminate the subject when the shutter button is pressed halfway, making it easier for the camera to focus when recording in low light conditions. (Larger AF area is displayed depending on the recording conditions.) • The effective range of the AF Assist Lamp is different depending on the lens used.
5. Focus and Brightness (Exposure) Settings Recording/not recording even when focus is not achieved MENU > [Custom] > [Focus/Release Priority] [FOCUS]: You cannot take a picture until the subject is brought into focus. [RELEASE]: This gives priority to the best time to take a picture so you can take a picture when the shutter button is pressed fully. • When set to [RELEASE], please be aware that focus may not be achieved even with focus mode set to [AFS], [AFF] or [AFC].
5. Focus and Brightness (Exposure) Settings Adjusting Focus Manually Applicable modes: Use this function when you want to fix the focus or when the distance between the lens and the subject is determined and you do not want to activate Auto Focus. The operations used to focus manually differ depending on the lens.
5. Focus and Brightness (Exposure) Settings • You can also enlarge the area by rotating the focus ring, moving the focus lever, or pinching out (P59) the screen or touching the screen twice. 4 • You can also adjust the focus position by dragging (P59) the screen. • Pressing [DISP.] resets the focus position back to the centre. B Adjust the focus. C + A Indicator for ¶ (infinity) B MF Assist (enlarged screen) C Peaking D MF Guide • The in-focus portions will be highlighted.
5. Focus and Brightness (Exposure) Settings 5 Press the shutter button halfway. • The assist screen will close. The recording screen will be displayed. • You can also close the assist screen by pressing [MENU/SET]. • If you have enlarged the picture by rotating the focus ring or moving the focus lever, the assist screen will close approximately 10 seconds after the operation.
5. Focus and Brightness (Exposure) Settings ∫ About the focus distance reference mark The focus distance reference mark is a mark used to measure the focus distance. Use this when taking pictures with Manual Focus or taking close-up pictures. Focus range A Focus distance reference mark B Focus distance reference line C 0.2 m (0.66 feet) (focal length 14 mm to 20 mm) [When the interchangeable lens (H-FS1442A) is used] D 0.3 m (0.
5. Focus and Brightness (Exposure) Settings Setting the display method of the MF Assist (enlarged screen) > MENU [Custom] > [MF Assist] • Available settings vary depending on the lens used. When an interchangeable lens having a focus ring (H-FS1442A/H-FS45150/H-FS14140) is used [ ] [ The screen is enlarged by operating the focus ring or the focus lever of the lens or by pressing 2( ). ] The screen is enlarged by operating the focus ring or the focus lever of the lens.
5. Focus and Brightness (Exposure) Settings Highlighting/not highlighting in-focus portions MENU > [Custom]>[Peaking] [ON] In-focus portions are highlighted with colour. [OFF] In-focus portions are not highlighted. The detection level for in-focus portions is set. When [HIGH] is set, portions to be highlighted are [Detect Level] reduced, allowing you to achieve a more precise focus. [HIGH]/[LOW] • The detection level setting does not affect the focus range.
5. Focus and Brightness (Exposure) Settings Fixing the Focus and the Exposure (AF/AE Lock) Applicable modes: This is useful when you want to take a picture of a subject outside the AF area or the contrast is too strong and you cannot achieve appropriate exposure. 1 2 Align the screen with the subject. Press and hold [AF/AE LOCK] to fix the focus or exposure. AF/AE LOCK • If you release [AF/AE LOCK], AF/AE Lock is cancelled. • Only the exposure is locked in the default setting.
5. Focus and Brightness (Exposure) Settings Setting the functions of [AF/AE LOCK] MENU > [Custom] > [AF/AE Lock] [AE LOCK] Only the exposure is locked. • When the exposure is set, [AEL], the aperture value, and the shutter speed are displayed. [AF LOCK] Only the focus is locked. • When the subject is focused, [AFL], the focus indication, the aperture value, and the shutter speed are displayed. Both focus and exposure are locked.
5. Focus and Brightness (Exposure) Settings Compensating the Exposure Applicable modes: Use this function when you cannot achieve appropriate exposure due to the difference in brightness between the subject and the background. The [ ]/[Fn1] button can be used in two ways, as [ ] (exposure compensation) or [Fn1] (function 1). At the time of purchase, the button is set to [ ]. • For details on the function buttons, refer to P70. 1 2 Press [ ]. Fn1 Rotate the rear dial to compensate the exposure.
5. Focus and Brightness (Exposure) Settings 4 Press [ ] to set. • You can also press the shutter button halfway to set. • When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of the flash will automatically be set to the level appropriate to the selected Exposure Compensation. (P237) • When the exposure value is out of the j3 EV to i3 EV range, the brightness of the recording screen will no longer change.
5. Focus and Brightness (Exposure) Settings Setting the Light Sensitivity Applicable modes: This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure enables pictures to be taken even in dark places without the resulting pictures coming out dark. 1 Press 3 ( ). リヴヰ ョㄏピ 2 Select the ISO sensitivity by rotating the rear dial. • You can switch the functions between the rear dial and the front dial by pressing [DISP.].
5. Focus and Brightness (Exposure) Settings AUTO The ISO sensitivity is automatically adjusted according to the brightness. • Maximum [ISO3200] (With the flash on [ISO1600])¢1 The camera detects movement of the subject and then automatically sets the optimum ISO sensitivity and shutter speed to suit the movement of the subject and brightness of the scene to minimise the jitter of the subject.
5. Focus and Brightness (Exposure) Settings Setting the upper limit on ISO sensitivity Applicable modes: It will select optimal ISO sensitivity with set value as limit depending on the brightness of the subject. ].
5. Focus and Brightness (Exposure) Settings Setting the Metering Mode Applicable modes: Type of optical measurement to measure brightness can be changed. MENU > [Rec] > [Metering Mode] [ ] (Multiple) This is the method in which the camera measures the most suitable exposure by judging the allocation of brightness on the whole screen automatically. Usually, we recommend using this method.
6. Shutter and Drive Settings Setting the Shutter Type ([Electronic Shutter]) Applicable modes: You can use either of the two shutters to take pictures: the mechanical shutter or the electronic shutter. Mechanical shutter Electronic Shutter Flash ± — Shutter Speed (Sec.) B (Bulb)¢1/60 to 1/4000th 1¢2 to 1/16000th Shutter sound Mechanical shutter sound¢3 Electronic shutter sound¢4 ¢1 This setting is available only in Manual Exposure Mode. (P97) ¢2 Up to an ISO sensitivity of [ISO3200].
6. Shutter and Drive Settings Minimising vibration of the shutter Applicable modes: To reduce the influence of hand shake or shutter vibration, shutter is released after the specified time has passed. Select the menu.
6. Shutter and Drive Settings Select a Drive Mode Applicable modes: You can change what the camera will do when you press the shutter button. Rotating the drive mode dial. [Single] When the shutter button is pressed, only one picture is recorded. [Burst] (P182) Recordings are made in succession while the shutter button is pressed. [4K PHOTO] (P185) When the shutter button is pressed, a 4K photo is recorded.
6. Shutter and Drive Settings Taking Pictures using Burst Mode Applicable modes: Pictures are taken continuously while the shutter button is pressed. • Pictures taken with a burst speed of [SH] will be recorded as a single burst group (P262). 1 Set the drive mode dial to [ 2 Focus on the subject and take a picture. ]. 25p 4:3 L AFS H • Hold down the shutter button fully to activate the Burst Mode. ∫ Changing the burst speed 1 Select the menu.
6. Shutter and Drive Settings ¢3 Depending on the recording conditions, the number of frames in a burst may be reduced. (For example, when you set [i.Resolution] of the [Rec] menu, the number of frames in a burst may be reduced) ¢4 Pictures can be taken until the capacity of the card becomes full. However the burst speed will become slower halfway. The exact timing of this depends on the aspect ratio, the picture size, the setting for the quality and the type of card used.
6. Shutter and Drive Settings • We recommend using the shutter remote control (DMW-RSL1: optional) when you want to keep the shutter button pressed fully while taking pictures in Burst Mode. Refer to P363 for information about the shutter remote control. • When the burst speed is set to [SH] or [H] (when focus mode is [AFS] or [MF]), the exposure and White Balance are fixed at the settings used for the first picture for the subsequent pictures as well.
6. Shutter and Drive Settings Recording 4K Photos Applicable modes: Press the shutter button to record a 4K photo. You can select the desired moment from a burst of pictures taken at 30 frames/second and save that moment as a picture of 8 million pixels (approx.). 1 Record a 4K photo. 2 Select and save pictures. 3 The picture is complete. • Use a UHS Speed Class 3 card to record 4K photos. (P22) • When recording 4K photos, the angle of view is slightly narrower. 1 Set the drive mode dial to [ ].
6. Shutter and Drive Settings For capturing the best shot of a fast-moving subject (e.g., sports, aeroplanes, trains) [ ] [4K Burst] (P188) Burst recording is performed while the shutter button is pressed and held. The shutter sound will be heard repeatedly. A Press and hold B Recording is performed Continuous recording length: Up to 29 minutes and 59 seconds¢1 Audio recording: Not available For capturing unpredictable photo opportunities (e.g.
6. Shutter and Drive Settings 4 Press the shutter button halfway. 25p • The recording screen will be displayed. You can also perform the same operation by pressing and holding [ ] until the recording screen is displayed. 5 Press the shutter button to perform recording. Recording with [ ] ([4K Burst]) ≠ (P188) Recording with [ ] ([4K Burst(S/S)]) ≠ (P189) Recording with [ ] ([4K Pre-Burst]) ≠ (P190) • After the 4K burst photo recording, a 4K burst file will be saved.
6. Shutter and Drive Settings Recording with [4K Burst] 1 2 3 Select [ ] ([4K Burst]). (P185) 25p 4:3 4K AFS Press the shutter button halfway. Press and hold the shutter button fully for as long as you want to perform recording. A Available recording time 0 529m59s • Press the button fully slightly in advance. Recording starts approximately 0.5 seconds after it has been pressed fully. A • A 4K burst file will be recorded while the shutter button is pressed and held.
6. Shutter and Drive Settings Recording with [4K Burst(S/S)] 1 2 Select [ ] ([4K Burst(S/S)]). (P185) Press the shutter button fully. • Recording of a 4K burst file will start. • If you are using Auto Focus, [Continuous AF] will work 3 Press the shutter button fully again. 25p 4:3 4K AFS during recording. Focus will be adjusted continuously. 0 529m59s A Available recording time • Recording of the 4K burst file will stop.
6. Shutter and Drive Settings Recording with [4K Pre-Burst] 1 Select [ ] ([4K Pre-Burst]). (P185) • If you press the shutter button halfway, the aperture value 2 Press the shutter button fully. 25p 4:3 4K AFS and shutter speed will be displayed. A Number of recordings that can be made • Recording of a 4K burst file will be performed for 0 1200 3.5 1000 approximately 1 second before and after the moment that A the shutter button is pressed. • The shutter sound will be heard only once.
6. Shutter and Drive Settings Selecting pictures from 4K burst file and saving • The picture will be saved in JPEG format. • The picture will be saved with recording information (Exif information), including its shutter speed, aperture and ISO sensitivity information. Setting [Playback Mode] in the [Playback] menu to [4K PHOTO] enables you to play back only 4K burst files and pictures created from them.
6. Shutter and Drive Settings Button operation 2/1 Touch operation Touching>Dragging Description of operation Selects a frame • You can select a frame from 60 frames (continuous burst time of approximately 2 seconds). Displays the previous or next frames in slide view • The previous or next 45 frames (burst time Select / with 2/1 > [MENU/SET] s of approximately 1.5 seconds) will replace 45 of the frames that are currently displayed in slide view.
6. Shutter and Drive Settings <4K burst playback screen> Fn1 Fn2 During pause Button operation 0.5 second intervals at a faster speed than that of continuous playback.
6. Shutter and Drive Settings 4K burst files recorded with [ 1 ] ([4K Pre-Burst]) Select a 4K burst file ( ) on the playback screen, and press 3. • You can also perform the same operation by touching the icon [ ]. • The slide view screen for selecting pictures will be 2 displayed. It takes a few seconds until the screen is displayed. Touch and drag the frames to select the frame you want to save as a picture. • You can also perform the same operation by pressing 2/1.
6. Shutter and Drive Settings ∫ Selecting and saving pictures on the TV screen Preparation: Set [HDMI Mode (Play)] (P78) to [AUTO] or [4K]. • When connecting to a TV that does not support 4K motion picture, select [AUTO]. Connect the camera and a TV with an HDMI micro cable, and display the playback screen. (P341) • To select and save pictures when the camera is connected to a TV with an HDMI micro cable, set [VIERA Link] in [TV Connection] to [OFF].
6. Shutter and Drive Settings Notes on the 4K Photo function ∫ To change the aspect ratio Selecting [Aspect Ratio] in the [Rec] menu allows you to change the aspect ratio for 4K photos. ∫ To record the subject with reduced blur You can reduce the blur of the subject by setting a faster shutter speed. 1 Set the mode dial to [ ]. 2 Set the shutter speed by rotating the rear dial or the front dial. • To record a fast-moving subject, increase the shutter speed.
6. Shutter and Drive Settings ∫ Limitations on the 4K Photo function To optimise settings for 4K photo recording, certain limitations apply to some recording functions, menu items and other settings.
6. Shutter and Drive Settings • The following menu items are disabled: Applicable to [ ] ([4K Burst])/[ ] ([4K Burst(S/S)])/[ ] ([4K Pre-Burst]) [Rec] [Picture Size]/[Quality]/[AFS/AFF]/[iHandheld Night Shot]/[iHDR]/ [Panorama Settings]/[Electronic Shutter]/[Shutter Delay]/[Flash]/[Extended ISO]/ [Long Shtr NR]/[Shading Comp.]/[Ex. Tele Conv.]/[Color Space]/[Face Recog.
6. Shutter and Drive Settings Taking Pictures using Auto Bracket Applicable modes: Maximum of 7 pictures will be recorded with different exposure settings following the Exposure Compensation range every time the shutter button is pressed. With Auto Bracket [Step]: [3•1/3], [Sequence]: [0/s/r] 1st picture 2nd picture 3rd picture d0 EV j1/3 EV i1/3 EV 1 Set the drive mode dial to [ 2 Focus on the subject and take a picture. ].
6. Shutter and Drive Settings ∫ Changing the settings for [Single/Burst Settings], [Step] and [Sequence] in Auto Bracket 1 Select the menu. (P63) MENU 2 3 > [Rec] > [Auto Bracket] Press 3/4 to select [Single/Burst Settings], [Step] or [Sequence] and then press [MENU/SET]. Press 3/4 to select the setting and then press [MENU/SET].
6. Shutter and Drive Settings Taking Pictures with the Self-timer Applicable modes: 1 2 Set the drive mode dial to [ ]. Press the shutter button halfway to focus and then press it fully to take the picture. • Focus and exposure will be set when the shutter button is pressed halfway. • After the self-timer indicator flashes, recording starts. ∫ Changing the time setting for the self-timer 1 Select the menu.
6. Shutter and Drive Settings • We recommend using a tripod when recording with the self-timer. • The flash output may vary slightly when the [ ] is selected. Not available in these cases: ] in the following cases. • It cannot be set to [ – When White Balance Bracket is set – When recording with the shutter speed set to [B] (Bulb) – When [Simultaneous record w/o filter] of [Filter Settings] is set to [ON] – When using [Multi Exp.] • Self-timer is disabled in the following cases.
6. Shutter and Drive Settings Taking Pictures with Time Lapse Shot/Stop Motion Animation Applicable modes: You can take pictures with Time Lapse Shot or Stop Motion Animation. In addition, the pictures taken can be combined into a motion picture. • Set the date and time settings in advance. (P41) • Recorded pictures are displayed as group pictures. (P262) • When only one picture is taken, it will not be saved as a group picture.
6. Shutter and Drive Settings Taking Pictures Automatically at Set Intervals ([Time Lapse Shot]) Applicable modes: If you set the start time of recording, the recording interval and the number of pictures, the camera can automatically take pictures of subjects such as animals or plants as time elapses and create a motion picture. 1 2 Set the drive mode dial to [ 3 Press 3/4 to select the item and then press [MENU/ SET]. ]. Display the setup screen.
6. Shutter and Drive Settings 4 5 Press the shutter button halfway. • The recording screen will be displayed. You can also 4:3 L AFS perform the same operation by pressing and holding [ ] until the recording screen is displayed. Press the shutter button fully. • The recording starts automatically. • During recording standby, the power will turn off automatically if no operation is performed for a certain period. The Time Lapse Shot is continued even with the power turned off.
6. Shutter and Drive Settings Creating Stop Motion Pictures ([Stop Motion Animation]) Applicable modes: A stop motion picture is created by splicing pictures together. Before creating a motion picture with [Stop Motion Animation] With [Stop Motion Animation], you can make a motion picture in which objects appear to be moving by making a recording each time you move a doll, etc., in small increments, and then splicing the recordings together.
6. Shutter and Drive Settings 3 Press 3/4 to select the recording method, and then press [MENU/SET]. [Auto Shooting] [ON] Takes pictures automatically at a set recording interval. When the shutter button is pressed fully, recording starts. [OFF] This is for taking pictures manually, frame by frame. (Only when [Auto Shooting] is set to [ON]) Sets the interval for automatic recording. A value between 1 and 60 seconds can be set in 1 second intervals.
6. Shutter and Drive Settings ∫ Changing the settings of Stop Motion Animation You can change the settings in [Time Lapse/Animation] in the [Rec] menu. ∫ Adding pictures to the Stop Motion Animation group Selecting [Add to Picture Group] in step 3 will display group pictures recorded with [Stop Motion Animation]. Select a set of group pictures, press [MENU/SET], and then select [Yes] on the confirmation screen. • If only one picture was taken, the picture is not saved as a group picture.
6. Shutter and Drive Settings Creating motion pictures from recorded pictures To create motion pictures after taking pictures, follow the steps below. 1 Select the methods for creating a motion picture. • The recording format is set to [MP4]. [Rec Quality] Sets the quality of a motion picture. [4K/25p]/[4K/24p]/[FHD/50p]/[FHD/25p]/[HD/25p]/[VGA/25p] [Frame Rate] Sets the number of frames per second. The larger the number is, the smoother the motion picture will be. [50fps]¢/[25fps]/[12.5fps]/[8.
7. Functions Customised for Various Subjects and Purposes Making Multiple Exposures on One Picture ([Multi Exp.]) Applicable modes: Gives an effect like multi exposure. (up to 4 times equivalent per a single image) 1 Select the menu. (P63) MENU > [Rec] > [Multi Exp.] 2 Press 3/4 to select [Start] and then press [MENU/ SET]. 3 Decide on the composition, and take the first picture. • After taking the picture, press the shutter button halfway down to take the next picture.
7. Functions Customised for Various Subjects and Purposes ∫ About Automatic Gain Control setting Select [Auto Gain] on the screen shown in step 2 and set it. • [ON]: The brightness level is adjusted according to the number of pictures taken and the pictures are superimposed over each other. • [OFF]: Compensate the exposure to match the subject so that all the superimposed exposure effects will be just right.
7. Functions Customised for Various Subjects and Purposes Disabling Operational Sounds and the Output of Light at once ([Silent Mode]) Applicable modes: This function is useful for recording images in a quiet environment, public facility, etc. or recording images of subjects such as babies or animals. Select the menu. (P63) MENU > [Custom] > [Silent Mode] Settings: [ON]/[OFF] • Audio from the speaker will be muted and the flash and the AF Assist lamp will be disabled. The following settings are fixed.
7. Functions Customised for Various Subjects and Purposes Taking Pictures with the Face Recognition Function ([Face Recog.]) Applicable modes: Face Recognition is a function which finds a face resembling a registered face and priorities focus and exposure automatically. Even if the person is located towards the back or on the end of a line in a group photo, the camera can still take a clear picture. KEN KEN Select the menu. (P63) MENU > [Rec] > [Face Recog.
7. Functions Customised for Various Subjects and Purposes • [Face Recog.] only works when the AF Mode is set to [š]. • During the Burst Mode, [Face Recog.] picture information can be attached to only the first picture. • When group pictures are played back, the name of the first picture of the set is displayed. • Face Recognition may take more time to select and recognise distinctive facial features than regular Face/Eye Detection.
7. Functions Customised for Various Subjects and Purposes Face Settings You can register information such as names and birthdays for face images of up to 6 people. ∫ Point of recording when registering the face images • Face front with eyes open and mouth closed, making (Good example for registering) sure the outline of the face, the eyes, or the eyebrows are not covered with hair when registering. • Make sure there is no extreme shading on the face when registering.
7. Functions Customised for Various Subjects and Purposes 4 Set the item. • You can register up to 3 face images. It is possible to register names. [Name] 1 Press 4 to select [SET] and then press [MENU/SET]. 2 Enter the name. • For details on how to enter characters, refer to “Entering Text” section on P82. It is possible to register the birthday. [Age] 1 Press 4 to select [SET] and then press [MENU/SET].
7. Functions Customised for Various Subjects and Purposes Change or delete the information for a registered person You can modify the pictures or information of an already registered person. You can also delete the information of the registered person. 1 2 3 Press 3/4 to select [MEMORY] and then press [MENU/SET]. Press 3/4/2/1 to select the face image to edit or delete and then press [MENU/SET]. Press 3/4 to select the item and then press [MENU/SET].
7. Functions Customised for Various Subjects and Purposes Recording Profiles of Babies and Pets on Images Applicable modes: If you set the name and birthday of your baby or pet in advance, you can record their name and age in months and years in the images. You can display these at playback or stamp the recorded images using [Text Stamp] (P276). JOE LUCKY ∫ Setting [Age] or [Name] 1 Select the menu.
7. Functions Customised for Various Subjects and Purposes Using screens and displays suitable for recording Displaying the centre of the screen ([Center Marker]) Applicable modes: The centre of the recording screen will be displayed as [+]. This is convenient for operating the zoom while keeping the subject at the centre of the screen.
7. Functions Customised for Various Subjects and Purposes Checking areas that may be white saturated ([Zebra Pattern]) Applicable modes: You can check areas that may be white saturated by displaying areas above a certain luminance level in a zebra pattern. You can also set the minimum luminance level (brightness) to be processed as a zebra pattern. MENU > [ZEBRA1] [ZEBRA2] [Custom] > [Zebra Pattern] Displays areas above a certain luminance level by a right-leaning zebra pattern.
7. Functions Customised for Various Subjects and Purposes Displaying the recording screen in black and white ([Monochrome Live View]) Applicable modes: You can display the recording screen in black and white. This function is convenient when a black and white screen will make it easier to set focus with Manual Focus. MENU > [Custom] > [Monochrome Live View] Settings: [ON]/[OFF] • Even if you use the HDMI output during recording, this function will not work for the connected device.
8. Stabiliser, Zoom and Flash Optical Image Stabiliser Applicable modes: The camera detects jitter during recording and automatically corrects it, so you can record images with reduced jitter. A lens which supports the stabiliser function is required. • The interchangeable lens (H-FS1442A/H-FS45150/H-FS14140) supports the Optical Image Stabiliser function. • When using an interchangeable lens with O.I.S. switch (such as H-FS14140), stabiliser function is activated if the O.I.S.
8. Stabiliser, Zoom and Flash Preventing jitter (camera shake) When the jitter alert [ ] appears, use [Stabilizer], a tripod, the self-timer (P201) or the remote shutter (DMW-RSL1: optional) (P363). • Shutter speed will be slower particularly in the following cases. Keep the camera still from the moment the shutter button is pressed until the picture appears on the screen. We recommend using a tripod. – Slow Sync. – Slow Sync.
8. Stabiliser, Zoom and Flash Taking Pictures with the Zoom Optical zoom Applicable modes: You can zoom-in to make people and objects appear closer or zoom-out to record landscapes, etc. T side: Enlarges distant subject W side: Widens angle of view Interchangeable lens with a zoom ring (H-FS1442A/ H-FS45150/ H-FS14140) Interchangeable lens that supports the power zoom (electrically operated zoom) Interchangeable lens that does not support the zoom Rotate the zoom ring. T W Move the zoom lever.
8. Stabiliser, Zoom and Flash Raising the telescopic effect [Ex. Tele Conv.] Applicable modes: The Extra Tele Conversion enables you to take pictures that are further enlarged without deteriorating the picture quality. When taking pictures [Ex. Tele Conv.] ([Rec]) 1.2k: [ 1.4k: [ 2.0k: [ • Set the picture size to [M]or [S] (picture sizes indicated with M] ([16:9]) M] ([4:3]/[3:2]/[1:1]) S] ([4:3]/[3:2]/[16:9]/[1:1]) ), and set the quality to [A] or [›]. When recording motion pictures [Ex. Tele Conv.
8. Stabiliser, Zoom and Flash ∫ Increasing the zoom magnification in steps • This can be used only when recording pictures. 1 Select the menu. (P63) 2 Set a function button to [Zoom Control]. (P70) • The following step is an example in which [Zoom Control] is assigned to [Fn1]. Press [Fn1]. Press 2/1 or 3/4. > MENU 3 4 [Rec] > [Ex. Tele Conv.
8. Stabiliser, Zoom and Flash • When the Extra Tele Conversion is used, angle of view for still pictures will be different from the angle of view for motion pictures because the zoom factor is different between them. Angle of view for recording can be checked beforehand by matching the [Rec Area] (P243) setting to the mode you wish to record in. • If you assign [Ex. Tele Conv.
8. Stabiliser, Zoom and Flash Changing the settings for a power zoom lens Applicable modes: Sets the screen display and lens operations when using an interchangeable lens that is compatible with power zoom (electrically operated zoom). This may only be selected when using a lens that is compatible with power zoom (electrically operated zoom). • The interchangeable lenses (H-FS1442A/H-FS45150/H-FS14140) are not compatible with power zoom. (For compatible lenses, please refer to our website.
8. Stabiliser, Zoom and Flash Zooming using touch operations You can perform zoom operations by touching. (Touch zoom) (Optical Zoom and Extra Tele Conversion for still picture recording are operable) • If you are using an interchangeable lens not supporting power zoom (H-FS1442A/H-FS45150/ H-FS14140), you can only operate the Extra Tele Conversion for pictures by setting [Ex. Tele Conv.] (P225) to [ZOOM]. 1 2 Touch [ ]. Touch [ ]. • The slide bar is displayed.
8. Stabiliser, Zoom and Flash Taking pictures by using the flash Applicable modes: ∫ Open/Close the built-in flash Taking a picture using the flash becomes possible by opening the built-in flash. A To open the flash Press the flash open button. B To close the flash Press the flash until it clicks. • Forcibly closing the flash can damage the camera. • Be sure to close the built-in flash when not in use. • The flash setting is fixed to [Œ] while the flash is closed.
8. Stabiliser, Zoom and Flash Forcing the flash off ([Œ]) When the flash is closed or pictures cannot be taken with the flash due to motion picture recording, etc., [Œ] (forced flash off) is displayed on the recording screen and the flash will not fire. • Close the flash in places where its use is prohibited so that it will not fire. In the following cases, the flash is fixed to [Œ] (forced flash off).
8. Stabiliser, Zoom and Flash ∫ The available flash range (approximation) When you use certain lenses, light from the flash may be blocked or fail to cover the lens field of view, causing dark areas to appear in the resulting pictures. The distance at which light from the flash is blocked by lens, and the distance to which light from the flash is delivered vary depending on the lens used. Check the distance to the subject when taking a picture.
8. Stabiliser, Zoom and Flash Setting the Flash Functions Changing the firing mode Applicable modes: Select whether to set the flash output automatically or manually. 1 Select the menu. (P63) MENU 2 > [Rec] > [Flash] > [Firing Mode] Press 3/4 to select the item and then press [MENU/SET]. [TTL] [MANUAL] The camera automatically sets the flash output. Set the luminosity ratio of the flash manually.
8. Stabiliser, Zoom and Flash Changing Flash Mode Applicable modes: Set the flash to match the recording. 1 Select the menu. (P63) 2 Press 3/4 to select the item and then press [MENU/SET]. MENU > [Rec] > [Flash] > [Flash Mode] ([Forced Flash On]) ([Forced On/ Red-Eye])¢ ‰ ([Slow Sync.]) ([Slow Sync./ Red-Eye])¢ Œ ([Forced Flash Off]) The flash is activated every time regardless of the recording conditions. • Use this when your subject is back-lit or under fluorescent light.
8. Stabiliser, Zoom and Flash ∫ Available flash settings by Recording Mode The available flash settings depend on the Recording Mode.
8. Stabiliser, Zoom and Flash ∫ Shutter speed for each flash setting Flash setting Shutter speed (Sec.) ‰ Flash setting Shutter speed (Sec.) 1/60¢ to 1/160th 1 to 1/4000th ¢ This becomes 60 seconds in Shutter-Priority AE Mode and B (Bulb) in the Manual Exposure Mode. • When the flash is activated the fastest shutter speed that can be selected is 1/160 of a second. • In Intelligent Auto ( or ) Mode, shutter speed changes depending on the identified scene.
8. Stabiliser, Zoom and Flash Adjust the flash output Applicable modes: Adjust the flash brightness when pictures taken with the flash are over or underexposed. 1 Select the menu. (P63) MENU 2 > [Rec] > [Flash] > [Flash Adjust.] Press 2/1 to set the flash output and then press [MENU/SET]. • You can adjust from [j3 EV] to [i3 EV] in steps of 1/3 EV. • Select [n0] to return to the original flash output. • [i] or [j] is displayed on the flash icon in the screen when the flash level is adjusted.
8. Stabiliser, Zoom and Flash Taking Pictures with Wireless Flashes Applicable modes: By using flashes that support the wireless control (DMW-FL360L, DMW-FL580L: optional), you can control firing of the built-in flash (or a flash attached to the hot shoe of this unit) and three flash groups separately. ∫ Placing wireless flashes Place the wireless flash with its wireless sensor facing toward the camera.
8. Stabiliser, Zoom and Flash 1 Set the wireless flashes to RC Mode and then place them. • Set a channel and groups for the wireless flash. 2 3 Press the flash button to open the built-in flash or attach a flash (DMW-FL360L, DMW-FL580L: optional) to the camera. Select the menu. (P63) MENU 4 > [Rec] > [Flash] > [Wireless] Press 3/4 to select [ON] and then press [MENU/SET]. • When [Wireless] is set to [ON], [WL] is displayed on the flash icon on the recording screen.
8. Stabiliser, Zoom and Flash [Firing Mode] [TTL]: The camera automatically sets the output. [AUTO]:¢2 Flash output is set by the external flash. [MANUAL]:¢2 Set the luminosity ratio of the external flash manually. [OFF]: [Built-in Flash]¢1/ [External Flash]¢1 The flash on the camera side emits only communication light. [Flash Adjust.] Set the flash output of the camera manually when [Firing Mode] is set to [TTL]. [Manual Flash Adjust.
8. Stabiliser, Zoom and Flash Using other settings for wireless flash recording Enabling FP firing for the wireless flashes During wireless recording, an external flash fires an FP flash (high speed repetition of flash firing). This firing allows recording with the flash at a fast shutter speed. Select the menu. (P63) MENU > [Rec] > [Flash] > [Wireless FP] Settings: [ON]/[OFF] Setting the output of communication light Set the communication light level for wireless recording. Select the menu.
9. Recording Motion Pictures Recording Motion Picture Applicable modes: This camera can record full high definition motion pictures compatible with the AVCHD format or motion pictures recorded in MP4. In addition, the camera can record 4K motion pictures in MP4. (P245) Audio will be recorded in stereo. The functions available when recording motion pictures differ according to the lens you are using, and the operational sound of the lens may be recorded. Refer to the website for compatible lenses.
9. Recording Motion Pictures About the operation sound that is produced when you stop recording Since motion picture recording stops only after you press the motion picture button, the sound of the operation may be noticeable. If the sound bothers you, try the following: – Divide the last part of the motion picture using [Video Divide] (P279) in the [Playback] menu. The motion picture may not be divided near the very end of it. To avoid this, record approximately 3 seconds longer.
9. Recording Motion Pictures • When the ambient temperature is high or motion picture is recorded continuously, the camera may display [ ] and stop the recording to protect itself. Wait until the camera cools down. • The operational sound of the zoom or button operation may be recorded when it is operated during the recording of a motion picture. • The available recording time displayed on the screen may not decrease regularly.
9. Recording Motion Pictures Recording motion pictures in 4K Applicable modes: You can create finely-detailed motion pictures in 4K by recording motion pictures with their size set to [4K] in [Rec Quality]. • When recording motion pictures in 4K, use a card rated as UHS Speed Class 3. (P22) • The angle of view of motion pictures in 4K is narrower than those of motion pictures in other sizes. To record motion pictures in 4K: 1 Set [Rec Format] in the [Motion Picture] menu to [MP4].
9. Recording Motion Pictures Setting the format, size and recording frame rate Applicable modes: 1 Select the menu. (P63) MENU 2 > [Motion Picture] > [Rec Format] Press 3/4 to select the item and then press [MENU/SET]. This data format is suitable for when playing back on a high-definition TV, etc. [AVCHD] [MP4] 3 4 This data format is suitable for when playing back on a PC, etc. Press 3/4 to select [Rec Quality] and then press [MENU/SET]. Press 3/4 to select the item and then press [MENU/SET].
9.
9. Recording Motion Pictures How to set focus when recording a motion picture ([Continuous AF]) Applicable modes: Focusing changes depending on the Focus Mode setting (P149) and the [Continuous AF] setting in the [Motion Picture] menu. Focus mode [AFS]/[AFF]/ [AFC] [MF] [Continuous AF] Description of settings [ON] The camera automatically keeps focusing on subjects during recording. [OFF] The camera maintains the focus position at the start of recording. [ON]/[OFF] You can focus manually.
9. Recording Motion Pictures Recording still pictures while recording motion pictures Applicable modes: You can record still pictures while recording a motion picture. (Simultaneous recording) During motion picture recording, press the shutter button fully to record a still picture. • Simultaneous recording indicator is displayed while recording still pictures. • Recording with the Touch Shutter function (P61) is also 13 available.
9. Recording Motion Pictures • The picture aspect ratio will be fixed to [16:9]. Not available in these cases: • This function is not available in the following cases: – When [Rec Format] is set to [MP4] and [Rec Quality] is set to [4K/100M/25p], [4K/100M/24p] or [VGA/4M/25p] – When [Rec Format] is set to [AVCHD] and [Rec Quality] is set to [FHD/24M/24p] [only when [ ] ([Photo Priority]) is set] – When the drive mode is set to 4K Photo (only when [ ] ([Photo Priority]) is set) – When using [Ex.
9. Recording Motion Pictures Recording Snap Movies Applicable modes: You can specify the recording time in advance and record motion pictures casually like you take snapshots. The function also allows you to shift a focus at the start of recording and add fade in/out effects in advance. • Motion pictures will be recorded with [FHD/20M/25p] in [MP4]. • Using the smartphone/tablet app “Panasonic Image App”, you can combine motion pictures recorded with the camera.
9. Recording Motion Pictures 7 A Start recording by pressing the motion picture button. SNAP 4SEC 3s A Elapsed recording time B Set recording time • Release the motion picture button right after you press it. • You cannot stop motion picture recording in the middle.The recording will stop automatically when the set recording time has elapsed. 4s B ∫ To deactivate Snap Movie Select [OFF] in step 2.
9. Recording Motion Pictures Setting up [Pull Focus] Set the frames that determine a focus start (first) position and focus end (second) position. The camera then measures its distance to the subjects and sets focus. When you start motion picture recording, focus shifts from the first frame to the second frame. Button operation 1 Press 2. 2 Press 3/4/2/1 to move the AF area frame, and press [MENU/SET]. (First position) • If you press [DISP.] before pressing [MENU/SET], the frame will return to the centre.
9. Recording Motion Pictures Using the [Motion Picture] Menu For details on [Motion Picture] menu settings, refer to P63. • [Photo Style], [Filter Settings], [AFS/AFF], [Metering Mode], [Highlight Shadow], [i.Dynamic], [i.Resolution], [Diffraction Compensation] and [Digital Zoom] are common to both the [Rec] menu and [Motion Picture] menu. Changing these settings in one of these menus is reflected in other menu. • [Motion Picture] menu is not displayed in the following cases.
9. Recording Motion Pictures [Ex. Tele Conv.] • Refer to P225 for details. [Flkr Decrease] Applicable modes: The shutter speed can be fixed to reduce the flicker or striping in the motion picture. Settings: [1/50]/[1/60]/[1/100]/[1/120]/[OFF] [Silent Operation] • Refer to P127 for details. [Mic Level Disp.] Applicable modes: Set whether or not the mic levels are displayed on the screen. Settings: [ON]/[OFF] • When [Mic Level Limiter] is set to [OFF], [Mic Level Disp.] is fixed to [ON].
9. Recording Motion Pictures [Mic Level Limiter] Applicable modes: The camera adjusts the sound input level automatically, minimising the sound distortion (crackling noise) when the volume is too high. Settings: [ON]/[OFF] Not available in these cases: • This function is not available in the following cases: – [Miniature Effect] (Creative Control Mode) [Wind Noise Canceller] Applicable modes: This will reduce the wind noise coming into the built-in microphone while maintaining sound quality.
10. Playing Back and Editing Images Playing Back Pictures 1 Press [(]. 2 Press 2/1. 2: Play back the previous picture 1: Play back the next picture 1/98 • If you press and hold 2/1, you can play back the pictures in succession. • Pictures can also be forwarded or rewound by rotating the front dial or dragging the screen horizontally. (P59) • You can forward or rewind pictures continuously by keeping your finger on the left or right sides of the screen after forwarding/rewinding a picture.
10. Playing Back and Editing Images Playing Back Motion Pictures This unit was designed to play motion pictures using the AVCHD and MP4 formats. • Motion pictures are displayed with the motion picture icon ([ ]). • 4K burst files recorded with the 4K Photo function are displayed with [ ]. For information on the playback of 4K burst files, refer to (P191). A 12s Press 3 to play back. A Motion picture recording time • After playback starts, the elapsed playback time is displayed on the screen.
10. Playing Back and Editing Images ∫ Operations during automatic Snap Movie playback 3 Playback from the beginning 2 Back to previous picture 1 Ahead to next picture • If you touch the screen, automatic playback will stop. • To play back the motion pictures recorded by this unit on a PC, use the “PHOTOfunSTUDIO” software on the DVD (supplied). Creating Still Pictures from a Motion Picture You can save a scene of a motion picture as a picture. 1 2 Press 3 to pause motion picture playback.
10. Playing Back and Editing Images Switching the Playback Method Using the Playback Zoom Rotate the rear dial right. A 1k 2k 4k 8k 16k • If the rear dial is rotated to the left after the image is enlarged, 2.0X the magnification will be reduced. • You can also enlarge/reduce the image by pinching out/ pinching in (P59) on the part you want to enlarge/reduce. • When you change the magnification, the zoom position indication A appears for about 1 second.
10. Playing Back and Editing Images ∫ To return to Normal Playback Press 3/4/2/1 to select a picture and then press [MENU/SET]. Displaying Pictures by Recording Date (Calendar Playback) 1 Rotate the rear dial left to display the Calendar screen. 2 Press 3/4/2/1 to select the date to be played back. 3 4 SUN MON TUE WED THU FRI SAT 2015 Press [MENU/SET] to display the images that are recorded in selected date. Press 3/4/2/1 to select a picture and then press [MENU/SET].
10. Playing Back and Editing Images Playing Back Group Pictures A picture group consists of multiple pictures. You can play back pictures in a group either continuously or one by one. • You can edit or delete all pictures in a group at once. (For example, if you delete a picture group, all pictures in the group are deleted.) [ ]: A picture group consisting of pictures taken in the Burst Mode with the burst speed [SH]. (P182) [ ]: A picture group consisting of pictures taken in a Time Lapse Shot.
10. Playing Back and Editing Images Playing back each Group Pictures 1 2 Press 4. SUB ]. • The same operation can be performed by touching [ MENU Press 3/4 to select [Display In Group], and then press [MENU/SET]. 1/98 SLF SUB MENU 3 Press 2/1 to flip through images. SUB ] and selecting [Exit Display In Group] will return you to • Pressing 4 again or touching [ MENU the normal playback screen. • Each picture in a group can be treated same as normal pictures when they are played back.
10. Playing Back and Editing Images Deleting Pictures Once deleted, pictures cannot be recovered. • Pictures that are not in the DCF standard or those that are protected cannot be deleted. To delete a single picture 1 In Playback Mode, select the picture to delete and then press [ ]. • The same operation can be performed by touching [ 2 Fn4 ]. Press 3 to select [Delete Single] and then press [MENU/SET]. 'HOHWH 6LQJOH 'HOHWH 0XOWL • Confirmation screen is displayed.
10. Playing Back and Editing Images To delete multiple pictures (up to 100¢) or all the pictures ¢ Picture groups are treated as a single picture. (All the pictures in the selected picture group will be deleted.) 1 2 In Playback Mode, press [ ]. Press 3/4 to select [Delete Multi] or [Delete All] and then press [MENU/SET]. • [Delete All] > Confirmation screen is displayed. Pictures are deleted by selecting [Yes].
10. Playing Back and Editing Images Using the [Playback] Menu With this menu, you can use various playback functions such as cropping and other editing of recorded images, protect settings, etc. • With [RAW Processing], [Clear Retouch], [Text Stamp], [Time Lapse Video], [Stop Motion Video], [Resize] or [Cropping], a new edited picture is created. A new picture cannot be created if there is no free space on the card so we recommend checking that there is free space before editing the picture.
10. Playing Back and Editing Images [2D/3D Settings] Playback methods for the 3D pictures can be switched. • This is a menu that is only displayed when 3D playback is possible. Refer to P358 for details. [Slide Show] You can play back the pictures you have taken in synchronisation with music, and you can do this in sequence while leaving a fixed interval between each of the pictures.
10. Playing Back and Editing Images ∫ Changing the slide show settings You can change the settings for slide show playback by selecting [Effect] or [Setup] on the slide show menu screen. [Effect] This allows you to select the screen effects when switching from one picture to the next. [AUTO]/[NATURAL]/[SLOW]/[SWING]/[URBAN]/[OFF] • When [URBAN] has been selected, the picture may appear in black and white as a screen effect. • [AUTO] can be used only when [Category Selection] has been selected.
10. Playing Back and Editing Images [Playback Mode] Playback in [Normal Play], [Picture Only], [Video Only], [4K PHOTO], [3D Play], [Category Play] or [Favorite Play] can be selected. 1 Select the menu. (P63) MENU 2 > [Playback] > [Playback Mode] Select the group to play back by pressing 3/4, and then press [MENU/SET]. • If you select [Video Only], 4K burst files recorded with the 4K Photo function will also be played back. • Refer to P358 for the method to play back [3D Play] pictures in 3D.
10. Playing Back and Editing Images [Location Logging] You can write location information sent from a smartphone (latitude and longitude) on images. • You can send location information and write it on images using a smartphone. (P302) • You need to install “Panasonic Image App” on your smartphone. (P294) • Read the [Help] in the “Image App” menu for further details on how to operate. Preparation: Sending location information to the camera from the smartphone. 1 Select the menu.
10. Playing Back and Editing Images [RAW Processing] You can process the pictures taken in RAW format. The processed pictures will be saved in JPEG format. You can check how effects are applied to each picture while processing it. 1 Select the menu. (P63) MENU 2 3 > [Playback] > [RAW Processing] Select RAW images with 2/1, and then press [MENU/ SET]. Press 3/4 to select an item. • You can set the following items. The settings you used for the recording are selected when you start setting these items.
10. Playing Back and Editing Images 4 5 6 Press [MENU/SET] and set. • The setting method differs according to the item. For details, refer to “How to set each item” on P272. Press [MENU/SET]. • This operation returns you to the screen in step 3. To set other items, repeat steps 3 through 5. Select [Begin Processing] with 3/4, and then press [MENU/SET]. • Confirmation screen is displayed. It is executed when [Yes] is selected. Exit the menu after it is executed.
10. Playing Back and Editing Images On the comparison screen, you can use the following operations to make adjustments: A Current setting Button operation Touch operation 2/1 / Dragging [DISP.] [DISP.] Returns you to the setting screen. [MENU/SET] [Set] Sets the adjusted level and returns you to the item selection screen. Description of operation 0 Selects a setting. • If you touch the picture at the centre, it will be enlarged. If you touch [ DISP.
10. Playing Back and Editing Images [Clear Retouch] You can erase unnecessary parts recorded on the pictures taken. • The erasure operation can only be performed by touching. [Clear Retouch] automatically enables the touch operation. 1 Select the menu. (P63) MENU 2 3 > [Playback] > [Clear Retouch] Press 2/1 to select a picture, and then press [MENU/SET]. Drag your finger over the part you want to delete. • The parts to be erased are coloured.
10. Playing Back and Editing Images • Pictures may appear unnatural because the background of deleted parts is artificially created. • For group pictures, perform [Clear Retouch] on each picture. (They cannot be edited at once.) • When [Clear Retouch] is performed on group pictures, they are saved as new pictures separate from the original ones. Not available in these cases: • Not available when the viewfinder is in use.
10. Playing Back and Editing Images [Title Edit] You can add text (comments) to pictures. After text has been registered, it can be stamped in prints using [Text Stamp] (P276). 1 Select the menu. (P63) MENU 2 3 > [Playback] > [Title Edit] > [Single]/[Multi] Select the picture. (P266) • [’] is displayed for pictures with titles already registered. Enter the text. (P82) • Exit the menu after it is set. • To delete the title, erase all the text in the text input screen.
10. Playing Back and Editing Images 4 5 Press 3/4 to select text stamp items, and then press [MENU/SET]. Press 3/4 to select the settings, and then press [MENU/SET]. [Shooting Date] [W/O TIME]: Stamp the year, month and date. [WITH TIME]: Stamp the year, month, day, hour and minutes. [OFF] [ ] ([Face Recognition]): [Name] [ Name registered in [Face Recog.] will be stamped. ] ([Baby/Pet]): Name registered in [Profile Setup] will be stamped.
10. Playing Back and Editing Images • When you print pictures stamped with text, the date will be printed over the stamped text if you specify printing of the date at the photo shop or on the printer. • You can set up to 100 pictures at one time in [Multi]. • The picture quality may deteriorate when text stamping is carried out. • Depending on the printer being used, some characters may be cut at printing. Check before printing.
10. Playing Back and Editing Images [Video Divide] Recorded motion picture can be divided in two. It is recommended for when you want to divide a part you need with a part you do not need. Dividing a motion picture is permanent. Decide before you divide! 1 Select the menu. (P63) MENU 2 3 > [Playback] > [Video Divide] Press 2/1 to select the motion picture to divide, and then press [MENU/SET]. Press 3 at the location to divide.
10. Playing Back and Editing Images [Time Lapse Video] This function allows you to create a motion picture from a picture group recorded with [Time Lapse Shot]. The created motion picture is saved in MP4 recording format. 1 Select the menu. (P63) MENU 2 3 > [Playback] > [Time Lapse Video] Select the [Time Lapse Shot] picture group with 2/1, and then press [MENU/ SET]. Create a motion picture by selecting the methods for creating it.
10. Playing Back and Editing Images [Resize] To allow easy posting to web pages, attachment to e-mail etc., picture size (number of pixels) is reduced. 1 Select the menu. (P63) MENU 2 > [Playback] > [Resize] > [Single]/[Multi] Select the picture and size. [Single] setting 1 Press 2/1 to select the picture, and then press [MENU/SET]. 2 Press 3/4 to select the size, and then press [MENU/SET]. • Confirmation screen is displayed. It is executed when 4:3 L 16 4:3 M 8 4:3 S 4 6HW [Yes] is selected.
10. Playing Back and Editing Images • You can set up to 100 pictures at one time in [Multi]. • The picture quality of the resized picture will deteriorate.
10. Playing Back and Editing Images [Cropping] You can enlarge and then clip the important part of the recorded picture. 1 Select the menu. (P63) MENU 2 3 > [Playback] > [Cropping] Press 2/1 to select the picture, and then press [MENU/SET]. Use the rear dial and press 3/4/2/1 to select the parts to be cropped. Rear dial (right): Enlargement Rear dial (left): Reduction 3/4/2/1: Move • You can also touch [ 4 ]/[ ] to enlarge/reduce. • You can also move by dragging on the screen. Press [MENU/SET].
10. Playing Back and Editing Images [Rotate]/[Rotate Disp.] This mode allows you to automatically display pictures vertically if they were recorded holding the camera vertically or rotate pictures manually in 90o steps. [Rotate] (The picture is rotated manually) • The [Rotate] function is disabled when [Rotate Disp.] is set to [OFF]. 1 Select the menu. (P63) MENU 2 3 > [Playback] > [Rotate] Press 2/1 to select the picture and then press [MENU/SET].
10. Playing Back and Editing Images [Favorite] You can do the following if a mark has been added to pictures and they have been set as favourites. • Play back the pictures set as favourites only as a slide show. • Play back only the pictures set as favourites. ([Favorite Play]) • Delete all the pictures not set as favourites. ([All Delete Except Favorite]) 1 Select the menu. (P63) MENU 2 > [Playback] > [Favorite] > [Single]/[Multi] Select the picture. (P266) • Exit the menu after it is set.
10. Playing Back and Editing Images [Print Set] DPOF “Digital Print Order Format” is a system that allows the user to select which pictures to print, how many copies of each picture to print and whether or not to print the recording date on the pictures when using a DPOF compatible photo printer or photo printing store. For details, ask at your photo printing store. When you set [Print Set] for a group pictures, the print setting for the number of prints will be applied to every picture in the group.
10. Playing Back and Editing Images • The number of prints can be set from 0 to 999. • Depending on the printer, the date print settings of the printer may take precedence so check if this is the case. • It may not be possible to use the print settings with other equipment. In this case, cancel all the settings, and reset the settings.
10. Playing Back and Editing Images [Face Rec Edit] You can clear and replace all information relating to face recognition in selected images. 1 Select the menu. (P63) MENU 2 3 4 > [Playback] > [Face Rec Edit] > [REPLACE]/[DELETE] Press 2/1 to select the picture and then press [MENU/SET]. Press 2/1 to select the person and then press [MENU/SET]. (When [REPLACE] is selected) Press 3/4/2/1 to select the person to replace and then press [MENU/SET]. • Confirmation screen is displayed.
10. Playing Back and Editing Images [Delete Confirmation] This sets which option, [Yes] or [No], will be highlighted first when the confirmation screen for deleting a picture is displayed. It is set to [“No” first] at the time of purchase. Yes 1 Select the menu. (P63) 2 Press 3/4 to select an item and then press [MENU/SET]. MENU > No [Playback] > [Delete Confirmation] [“Yes” first] [Yes] is highlighted first, so deletion can be done quickly. [“No” first] [No] is highlighted first.
11.
11. Using the Wi-Fi function Wi-Fi function ∫ Before Use • Set the date and time settings in advance. (P41) • To use the Wi-Fi function on this unit, a wireless access point or a destination device equipped with the wireless LAN function is required.
11. Using the Wi-Fi function What you can do with the [Wi-Fi] button when connected to Wi-Fi • Following items can be selected. [Terminate the Connection] [Change the Destination] ¢1 [Change Settings for Sending Images]¢2 Terminates the Wi-Fi connection. Terminates the Wi-Fi connection, and allows you to select a different Wi-Fi connection. Refer to P336 for details.
11. Using the Wi-Fi function ∫ Describing method When “select [Select a destination from History]”, etc. is described in a step, perform any of the following operations. Button operation: Touch operation: Select [Select a destination from History] with the cursor button, and then press [MENU/SET]. Touch [Select a destination from History]. • The camera cannot be used to connect to a public wireless LAN connection. • Use a IEEE802.11b, IEEE802.11g or IEEE802.
11. Using the Wi-Fi function Controlling with a Smartphone/Tablet Using a smartphone, you can record images on the camera and save them. You need to install “Panasonic Image App” (referred to as “Image App” from this point on) on your smartphone. Installing the smartphone/tablet app “Image App” The “Image App” is an application provided by Panasonic. • OS App for AndroidTM: Android 4.0 or higher App for iOS: iOS 6.0 or higher (Please note that the iPhone 3GS is not supported.
11. Using the Wi-Fi function Connecting to a smartphone/tablet You can easily set up a direct connection to your smartphone without entering a password. When [Wi-Fi Password] is set to the default setting [OFF], third parties may intercept Wi-Fi radio waves and collect the content of communications. To set [Wi-Fi Password] to [ON], refer to P296. Preparations (On the camera) • Set [Wi-Fi Password] to [OFF]. (P337) 1 (On your smartphone) • Install the “Image App” in advance.
11. Using the Wi-Fi function If you are using an Android device 1 Start “Image App”. (P294) • If a message appears stating that a camera search is in progress, close the message. • When the smartphone is connected to a wireless access point, it may take time to display the message. 2 Select [Wi-Fi]. 3 Select the SSID displayed on the screen of the camera. • The connection confirmation screen is displayed on the camera. Select [Yes].
11. Using the Wi-Fi function 3 Using “Image App”, scan the QR code displayed on the screen of the camera. • If you press [MENU/SET] on the camera, the QR code will be enlarged. When it is difficult to scan the QR code, try enlarging it. A SSID and password B QR code A B 4 Install the profile. • A message will be displayed on the browser. • If the smartphone is locked with a passcode, enter the passcode to unlock the smartphone. 5 Press the home button to close the browser.
11. Using the Wi-Fi function If you are using an Android device When scanning the QR code to set up a connection 1 Start “Image App”. (P294) 2 Select [QR code]. • When the smartphone is connected to a wireless access point, it may take time to display [QR code]. 3 Using “Image App”, scan the QR code displayed on the screen of the camera. • If you press [MENU/SET] on the camera, the QR code will be enlarged. When it is difficult to scan the QR code, try enlarging it.
11. Using the Wi-Fi function ∫ Changing the connection method To change the connection method, follow the steps below: (When the connection was made using [Wi-Fi] in the [Setup] menu) Press [DISP.] (When the connection was made by pressing [Wi-Fi]) Wi-Fi > [DISP.] button > [New Connection] > [Remote Shooting & View] > [DISP.] button When connecting via a wireless access point ([Via Network]): On the camera 1 Select [Via Network].
11. Using the Wi-Fi function ∫ Terminating the connection After use, terminate the connection to the smartphone. 1 Select the menu on the camera. (P63) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [Yes] • You can also terminate the connection by pressing [Wi-Fi] on the camera. (P292) On the smartphone, close “Image App”. 2 (If you are using an iOS device) On the screen of “Image App”, press the home button to close the app.
11. Using the Wi-Fi function Playing back images in the camera 1 2 Connect to a smartphone. (P295) Operate the smartphone. 1 Select [ ]. • You can switch the images to be displayed by selecting the icon (A) on the top left of the screen. To display images stored in the camera, select [LUMIX]. 2 Touch the image to enlarge it. Saving images stored in the camera 1 2 Connect to a smartphone. (P295) Operate the smartphone. 1 Select [ ].
11. Using the Wi-Fi function Sending images in the camera to an SNS 1 2 Connect to a smartphone. (P295) Operate the smartphone. 1 Select [ ]. • You can switch the images to be displayed by selecting the icon (A) on the top left of the screen. To display images stored in the camera, select [LUMIX]. 2 Touch and hold an image, and drag it to send it to an SNS, etc. • The image is sent to a web service such as an SNS.
11. Using the Wi-Fi function ∫ Operate the smartphone 1 2 3 4 Connect to a smartphone. (P295) Select [ ]. Select [Geotagging]. Select an icon. Start/stop recording location information. • The smartphone battery drains faster while location information is being recorded. When recording of location information is not necessary, stop it. Sending and writing location information. • Follow the on-screen messages to operate the smartphone. • Images with location information are indicated with [ ].
11. Using the Wi-Fi function Combining motion pictures recorded with Snap Movie according to your preference on a smartphone/tablet Using a smartphone, you can combine motion pictures recorded with the camera’s [Snap Movie] function (P251). Music can be added to motion pictures to be combined. In addition, you can save the combined motion picture or upload it on a web service. A Web service 1 2 3 4 Record motion pictures with [Snap Movie]. Send the recorded motion pictures.
11.
11. Using the Wi-Fi function Sending an image each time a recording is made ([Send Images While Recording]) 1 Select the menu. (P63) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] > [Send Images While Recording] > [Smartphone] 2 Select [Via Network] or [Direct], and connect. (P328) On your smartphone When connecting with [Via Network]: 1 Turn on the Wi-Fi function. 2 Select the wireless access point you want to connect to, and set. 3 Start “Image App”.
11. Using the Wi-Fi function Select and send the images ([Send Images Stored in the Camera]) 1 Select the menu. (P63) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] > [Send Images Stored in the Camera] > [Smartphone] 2 Select [Via Network] or [Direct], and connect. (P328) On your smartphone When connecting with [Via Network]: 1 Turn on the Wi-Fi function. 2 Select the wireless access point you want to connect to, and set. 3 Start “Image App”.
11. Using the Wi-Fi function Displaying pictures on a TV You can display pictures on a TV that supports the Digital Media Renderer (DMR) function of the DLNA standard. Preparations Set the TV to DLNA waiting mode. • Read the operating instructions for your TV. 1 Select the menu. (P63) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] > [Playback on TV] 2 3 4 Select [Via Network] or [Direct], and connect. (P328) Select a device you want to connect.
11. Using the Wi-Fi function Printing Wirelessly You can send images to a compatible printer, and print them wirelessly. ∫ Methods for sending and images that can be sent Select and send the images ([Send Images Stored in the Camera]) JPEG RAW MP4 AVCHD 4K Burst File 3D ± — — — — — • Some images may not be sent depending on the device. • For details on how to send images, refer to P334.
11. Using the Wi-Fi function When sending images to AV device You can send pictures and motion pictures to AV devices in your house (home AV devices).
11. Using the Wi-Fi function Sending an image each time a recording is made ([Send Images While Recording]) 1 Select the menu. (P63) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] > [Send Images While Recording] > [AV device] 2 3 4 5 Select [Via Network] or [Direct], and connect. (P328) Select a device you want to connect. Check the send settings, and select [Set]. • To change the send setting, press [DISP.]. (P336) Take pictures.
11. Using the Wi-Fi function When sending images to PC You can send pictures and motion pictures recorded with this unit to a PC. ∫ Methods for sending and images that can be sent JPEG RAW MP4 AVCHD¢ 4K Burst File 3D Sending an image each time a recording is made ([Send Images While Recording]) ± ± — — — ± Select and send the images ([Send Images Stored in the Camera]) ± ± ± ± ± ± ¢ A motion picture recorded in [AVCHD] can be sent to [PC] if the file size is 4 GB or smaller.
11. Using the Wi-Fi function To create a folder that receives images • Create a PC user account [account name (up to 254 characters) and password (up to 32 characters)] consisting of alphanumeric characters. An attempt to create a receive folder may fail if the account includes non-alphanumeric characters. ∫ When using “PHOTOfunSTUDIO” 1 Install “PHOTOfunSTUDIO” to the PC. • For details on hardware requirements and installation, read “About the supplied software” 2 (P346).
11. Using the Wi-Fi function Sending an image each time a recording is made ([Send Images While Recording]) 1 Select the menu. (P63) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] > [Send Images While Recording] > [PC] 2 3 Select [Via Network] or [Direct], and connect. (P328) Select the PC you want to connect to. • When the PC you want to connect to is not displayed, select [Manual Input], and enter the 4 5 Select the folder you want to send. Check the send settings, and select [Set].
11. Using the Wi-Fi function Select and send the images ([Send Images Stored in the Camera]) 1 Select the menu. (P63) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] > [Send Images Stored in the Camera] > [PC] 2 3 Select [Via Network] or [Direct], and connect. (P328) Select the PC you want to connect to. • When the PC you want to connect to is not displayed, select [Manual Input], and enter the 4 5 Select the folder you want to send. Check the send settings, and select [Set].
11. Using the Wi-Fi function Using Web services You can send pictures and motion pictures to an SNS, etc. via “LUMIX CLUB”. By setting up automatic transfers of pictures and motion pictures to the Cloud Sync Service, you can receive the transferred pictures or motion pictures on a PC or smartphone. LUMIX CLUB A Wireless access point B Web service C Cloud Sync Service Preparations To send images to a web service or a cloud folder, you need to register to “LUMIX CLUB” (P323).
11. Using the Wi-Fi function When sending images to web service ∫ Methods for sending and images that can be sent JPEG RAW MP4 AVCHD 4K Burst File 3D Sending an image each time a recording is made ([Send Images While Recording]) ± — — — — ± Select and send the images ([Send Images Stored in the Camera]) ± — ±¢ — — ± ¢ Excluding motion pictures recorded with their size set to [4K] in [Rec Quality] • Some images may not be played back or sent depending on the device.
11. Using the Wi-Fi function Registering web services When sending images to web services, the web service being used must be registered with the “LUMIX CLUB”. (P323) • Check the “FAQ/Contact us” on the following site for compatible web services. http://lumixclub.panasonic.net/eng/c/lumix_faqs/ Preparation: Make sure that you have created an account on the web service you want to use, and have the login information available. 1 2 3 4 Connect to the “LUMIX CLUB” site using a smartphone or computer.
11. Using the Wi-Fi function Select and send the images ([Send Images Stored in the Camera]) 1 Select the menu. (P63) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] > [Send Images Stored in the Camera] > [Web service] 2 3 4 5 Select [Via Network], and connect. (P328) Select a web service. Check the send settings, and select [Set]. • To change the send setting, press [DISP.]. (P336) Select [Single Select] or [Multi Select]. [Single Select] setting 1 Select the picture. 2 Select [Set].
11. Using the Wi-Fi function ∫ Sending images in the camera to a web service with simple operations Once you send an image, you can send other images to a web service with simple, smartphone-like operations in an environment where a wireless access point connection is available. (The instructions below assume that you are already registered to “LUMIX CLUB” and the camera has a record of a connection to a wireless access point.) 1 2 3 4 5 Display an image. Press 4.
11. Using the Wi-Fi function When sending images to [Cloud Sync. Service] ∫ Using [Cloud Sync. Service] (As of May 2015) Preparations You need to register to “LUMIX CLUB” (P323) and configure the Cloud Sync. setting to send a picture to a Cloud Folder. For a PC, use “PHOTOfunSTUDIO” to set up Cloud Sync settings. For a smartphone, use “Image App” to set them up. • If you set the picture destination to [Cloud Sync.
11. Using the Wi-Fi function Sending an image each time a recording is made ([Send Images While Recording]) 1 Select the menu. (P63) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] > [Send Images While Recording] > [Cloud Sync. Service] 2 3 4 Select [Via Network], and connect. (P328) Check the send settings, and select [Set]. • To change the send setting, press [DISP.]. (P336) Take pictures.
11. Using the Wi-Fi function Registering to the “LUMIX CLUB” About the [LUMIX CLUB] Acquire a “LUMIX CLUB” login ID (free). If you register this unit to the “LUMIX CLUB”, you can synchronise images between the devices you are using, or transfer these images to web services. Use the “LUMIX CLUB” when uploading pictures to web services. • You can set the same “LUMIX CLUB” login ID for this unit and a smartphone. (P326) Refer to the “LUMIX CLUB” site for details. http://lumixclub.panasonic.
11. Using the Wi-Fi function 5 Read through the “LUMIX CLUB” terms of use and select [Agree]. • You can switch pages by 3/4. • You can enlarge (2k) the display by rotating the rear dial to the right. • You can reset the enlarged display to its original size (1k) by rotating the rear dial to the left. 6 7 • You can move the position of the enlarged display with 3/4/2/1. • Press [ ] to cancel the process without acquiring a login ID. Enter a password.
11. Using the Wi-Fi function Using the acquired login ID/Checking or changing the login ID or password ([Set Login ID]) Preparation: When using the acquired login ID, check the ID and password. To change the “LUMIX CLUB” password on the camera, access the “LUMIX CLUB” website from your smartphone or PC and change the “LUMIX CLUB” password in advance. • The login ID and password registered to the “LUMIX CLUB” cannot be changed on this unit. 1 Select the menu.
11. Using the Wi-Fi function To set the same login ID for the camera and the smartphone/tablet • Setting the same login ID on this unit and your smartphone is convenient for sending images on this unit to other devices or web services. When either this unit or the smartphone/tablet has acquired the login ID: 1 2 Connect this unit to the smartphone. (P295) From the “Image App” menu, set the common login ID. • The login IDs for this unit and the smartphone become the same.
11. Using the Wi-Fi function Delete your login ID and account from the “LUMIX CLUB” Delete the login ID from the camera when transferring it to another party or disposing of it. You can also delete your “LUMIX CLUB” account. 1 Select the menu. (P63) MENU 2 3 4 5 > [Setup] > [Wi-Fi] > [Wi-Fi Setup] > [LUMIX CLUB] Select [Delete account]. • The message is displayed. Select [Next]. Select [Yes] in the login ID delete confirmation screen. • The message is displayed. Select [Next].
11. Using the Wi-Fi function About Connections If you have selected [New Connection], select a Wi-Fi function and destination first, and then select a connection method. If you have selected [Select a destination from History] or [Select a destination from Favorite], you can connect with the same Wi-Fi connection settings as used previously. This section describes connection methods. • When connecting with the same settings as used previously, refer to P332.
11. Using the Wi-Fi function Connecting via a wireless access point (via the network) You can select the method for connecting to a wireless access point. ¢ WPS refers to a function that allows you to easily configure the settings related to the connection and security of wireless LAN devices. To check if the wireless access point you are using is compatible with WPS, refer to the manual of the wireless access point.
11. Using the Wi-Fi function If you are not sure about the WPS compatibility (connecting by [From List]) Search for available wireless access points. • Confirm encryption key of the selected wireless access point if the network authentication is encrypted. • When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the wireless access point you are using. 1 Select the wireless access point you are connecting to. • Pressing [DISP.] will search for a wireless access point again.
11. Using the Wi-Fi function • Check the wireless access points instruction manual and settings when saving a wireless access point. • If no connection can be established, the wireless access point’s radio waves may be too weak. Refer to “Message Display” (P372) and “Troubleshooting” (P387) for details. • Depending on your environment, transmission speed between the camera and wireless access point may decrease. In addition, the wireless access point may not be available for use.
11. Using the Wi-Fi function Connecting quickly with the same settings as the previous ones ([Select a destination from History]/[Select a destination from Favorite]) When the Wi-Fi function is used, a record is saved in the history. You can register records as favourites. Using the history or favourites list, you can easily connect with the same settings as used previously. Check to see if the Wi-Fi settings of the device to connect to are the same as used previously.
11. Using the Wi-Fi function Editing the history registered to favourites 1 Select the menu. (P63) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Function] > [Select a destination from Favorite] 2 3 Select the favourite history you want to edit, and then press 1. Select the item. [Remove from Favorite] [Change the Order in Favorite] [Change the Registered Name] — Select the destination. • For details on how to enter characters, refer to “Entering Text” section on P82. • A maximum of 30 characters can be entered.
11. Using the Wi-Fi function About settings for sending images When sending images, select the method for sending them after selecting [New Connection]. After the connection has been completed, settings for sending, such as the image size for sending, can also be changed. ∫ Images that can be sent Destination AVCHD¢1, 2 4K Burst File¢1 3D — — — ± ± ± ±¢3 — — ± — ±¢3 — — ± ± — — — — ± ± — — — — — MP4¢1 JPEG RAW [Smartphone] ± — [PC] ± ± ± [Cloud Sync.
11. Using the Wi-Fi function Send Images While Recording A picture can be automatically sent to a specified device every time you take it. • Since the camera gives priority to recording, sending may take longer during the recording. • When connected with [Send Images While Recording], [ ] is displayed on the recording screen, and [ ] is displayed while sending a file. • If you turn off this unit or the Wi-Fi connection before sending is complete, unsent pictures will not be resent.
11. Using the Wi-Fi function Changing the settings for sending images Pressing [DISP.] after completing a connection allows you to change the settings for sending such as the image size for sending. [Size] Resize the image to send. [Original]/[Auto]¢1/[Change] • If you select [Auto], the image size is determined by the circumstances at the destination. • You can select the image size for [Change] from [M], [S] or [VGA]. The aspect ratio does not change.
11. Using the Wi-Fi function [Wi-Fi Setup] Menu Configure the settings required for the Wi-Fi function. The settings cannot be changed when connected to Wi-Fi. Select the menu. (P63) MENU > [Setup] > [Wi-Fi] > [Wi-Fi Setup] > Desired item to be set You can improve security by enabling password entry for a direct connection to a smartphone. [Wi-Fi Password] [ON]: Connects the camera and a smartphone using an SSID and password. (P296) [OFF]: Connects the camera and a smartphone using an SSID.
11. Using the Wi-Fi function To prevent incorrect operation or use of the Wi-Fi function by a third party and to protect saved personal information, it is recommended that you protect the Wi-Fi function with a password. [Wi-Fi Function Lock] Setting a password will automatically display the password input screen when the Wi-Fi function is used. [Setup]: Enter any 4-digit numbers as the password. [Cancel] • For details on how to enter characters, refer to “Entering Text” section on P82.
12. Connecting to other equipment Watching 4K motion pictures on a TV/ Saving 4K motion pictures on your PC or recorder Watching motion pictures in 4K ∫ Playing Back on a TV Screen By connecting the camera to a TV that supports motion pictures in 4K and playing back motion pictures recorded with their size set to [4K] in [Rec Quality], you can enjoy finely-detailed motion pictures in 4K.
12. Connecting to other equipment Storing 4K motion pictures ∫ Storing on a PC You can acquire recorded pictures to a PC by connecting the camera and the PC. Refer to P345 for details. ∫ Storing on a Hard Disk or DVD You cannot dub motion pictures recorded with their size set to [4K] in [Rec Quality] to Blu-ray discs and DVDs with Panasonic recorders.
12. Connecting to other equipment Playing Back Pictures on a TV Screen Pictures recorded with this unit can be played back on a TV screen. Preparations: Turn this unit and the TV off. • Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. 1 HDMI socket Video socket High quality Connect the camera and a TV. • Check the direction of the terminals and plug in/out straight holding onto the plug.
12. Connecting to other equipment To connect with an AV cable (optional) • Always use a genuine Panasonic AV cable (DMW-AVC1: optional). • Check the [TV Aspect]. (P78) • Audio will be played back in monaural. • The viewfinder cannot be displayed when connected with a AV cable. A B C D 2 3 HDMI micro cable HDMI socket AV cable (optional) Yellow: to the video input socket E White: to the audio input socket F Align the marks, and insert.
12. Connecting to other equipment The recorded pictures can be played back on a TV with an SD Memory Card slot • Depending on the TV model, pictures may not be displayed on the full screen. • The file format of the motion pictures that can be played back differs depending on the TV model. • In some cases, panorama pictures cannot be played back. Also, auto-scroll playback of panorama pictures may not work. • For cards compatible with playback, refer to the operating instructions of the TV.
12. Connecting to other equipment ∫ Other linked operations Turning this unit off: If you use the remote control for the TV to turn the TV off, this unit is also turned off. Automatic input switching: • If you connect with an HDMI micro cable and then turn this unit on, and then press [(], the input channel on the TV automatically switches to this unit’s screen. If the TV’s power is in standby status, it will turn on automatically (if [Set] has been selected for the TV’s [Power on link] setting).
12. Connecting to other equipment Saving still pictures and motion pictures on your PC You can acquire recorded pictures to a PC by connecting the camera and the PC. • Some PCs can read directly from the card removed from the camera. For details, refer to the operating instructions of your PC. • If the computer being used does not support SDXC Memory Cards, a message prompting you to format may appear. (Doing so will cause recorded images to be erased so do not choose to format.
12. Connecting to other equipment About the supplied software The supplied DVD includes the following software. Install the software on to your computer before use. • PHOTOfunSTUDIO 9.7 PE (Windows Vista/Windows 7/Windows 8/Windows 8.1) This software allows you to manage images. For example, you can send pictures and motion pictures to a PC and sort them by recording date or model name.
12. Connecting to other equipment ∫ Installing supplied software • Before inserting the DVD, close all running applications. 1 2 Check the environment of your PC. • Operating environment of “PHOTOfunSTUDIO” – OS: Windows VistaR (32bit) SP2, WindowsR 7 (32bit/64bit) SP1, WindowsR 8 (32bit/64bit), WindowsR 8.1 (32bit/64bit) – CPU: PentiumR III 800 MHz or higher (Windows VistaR), PentiumR III 1 GHz or higher (WindowsR 7/WindowsR 8/WindowsR 8.
12. Connecting to other equipment ∫ Transferring images to a PC Preparations: Install “PHOTOfunSTUDIO ” to the PC. 1 Connect the computer and camera with the USB connection cable (supplied). • Please turn this unit on and your PC before connecting. • Turn the monitor toward you. • Check the direction of the terminals and plug in/out straight holding onto the plug. (It may result in malfunction by the deforming of the terminal if it is plugged in obliquely or in wrong direction.
12. Connecting to other equipment ∫ Copying to a PC without using “PHOTOfunSTUDIO ” If you are not able to install “PHOTOfunSTUDIO”, you can copy files and folders to your PC by dragging and dropping files from this unit. • The content (folder structure) on the card of this unit is as follows. For Windows: A drive ([LUMIX]) is displayed in [Computer] For Mac: A drive ([LUMIX]) is displayed on the desktop • Card DCIM 100_PANA P1000001.JPG P1000002.JPG P1000999.
12. Connecting to other equipment Saving still pictures and motion pictures on a Recorder If you insert card holding content recorded with this unit into a Panasonic recorder, you can dub the content to a Blu-ray Disc or DVD etc. Methods to export still pictures and motion pictures to other devices will vary depending on the file format. (JPEG, RAW, MPO, AVCHD, or MP4).
12. Connecting to other equipment Printing the Pictures If you connect the camera to a printer supporting PictBridge, you can select the pictures to be printed out and instruct that printing be started on the camera’s monitor. • Group pictures will not be displayed as group pictures but as single pictures. • Some printers can print directly from the card removed from the camera. For details, refer to the operating instructions of your printer. Preparations: Turn on the camera and the printer.
12. Connecting to other equipment • Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery power becomes low while the camera and the printer are connected, the status indicator blinks and the alarm beeps. If this happens during printing, stop printing at once. If not printing, disconnect the USB connection cable. • Do not disconnect the USB connection cable while [å] (Cable disconnect prohibit icon) is displayed.
12. Connecting to other equipment Selecting a single picture and printing it 1 Press 2/1 to select the picture and then press [MENU/SET]. PictBridge 0XOWL 3ULQW 3ULQW 2 Press 3 to select [Print start] and then press [MENU/SET]. • Refer to P354 for the items that can be set before starting to print the pictures. • Disconnect the USB connection cable after printing. Selecting multiple pictures and printing them 1 2 Press 3. Press 3/4 to select an item and then press [MENU/SET].
12. Connecting to other equipment Print Settings Select and set the items both on the screen in step 2 of the “Selecting a single picture and printing it” and in step 3 of the “Selecting multiple pictures and printing them” procedures. • When you want to print pictures on a paper size or a layout which is not supported by the camera, set [Paper Size] or [Page Layout] to [{] and then set the paper size or the layout on the printer. (For details, refer to the operating instructions of the printer.
12. Connecting to other equipment ∫ [Paper Size] { Settings on the printer are prioritised. [L/3.5qk5q] 89 mmk127 mm [2L/5qk7q] 127 mmk178 mm [POSTCARD] [16:9] 100 mmk148 mm 101.6 mmk180.6 mm [A4] 210 mmk297 mm [A3] 297 mmk420 mm [10k15cm] 100 mmk150 mm [4qk6q] 101.6 mmk152.4 mm [8qk10q] 203.2 mmk254 mm [LETTER] 216 mmk279.4 mm [CARD SIZE] 54 mmk85.6 mm • Paper sizes not supported by the printer will not be displayed.
12. Connecting to other equipment ∫ Layout printing When printing a picture several times on 1 sheet of paper. For example, if you want to print the same picture 4 times on 1 sheet of paper, set [Page Layout] to [ä] and then set [Num.of prints] to 4 for the picture that you want to print. When printing different pictures on 1 sheet of paper. For example, if you want to print 4 different pictures on 1 sheet of paper, set [Page Layout] to [ä] and then set [Num.of prints] to 1 for each of the 4 pictures.
12. Connecting to other equipment Enjoying 3D pictures Taking 3D pictures Attaching the 3D interchangeable lens (H-FT012: optional) to the camera allows you to take 3D pictures for extra impact. To view 3D pictures, a television that supports 3D is required. 1 2 Attach the 3D interchangeable lens to the camera. Bring the subject into the frame and record by pressing the shutter button fully. • Focusing is not required when recording 3D pictures.
12. Connecting to other equipment Playing back 3D pictures Connecting the camera to a 3D compatible television and playing back pictures taken in 3D allows you to enjoy 3D pictures for extra impact. It is also possible to play back the recorded 3D pictures by inserting an SD card into the 3D compatible television with an SD card slot. Preparations: Set the [HDMI Mode (Play)] to [AUTO], [1080p] or [1080i]. (P78) Set the [3D Playback] to [ ].
12.
13. Others Optional accessories • Some optional accessories may not be available in some countries. External Flash (optional) After attaching the flash (DMW-FL360L, DMW-FL580L: optional), the effective range will be increased when compared to the camera’s built in flash. Preparations: • Turn off the camera and close the built-in flash. Removing the Hot Shoe Cover The camera comes with a hot shoe cover attached to the hot shoe.
13. Others • You can set the aperture value, the shutter speed and the ISO sensitivity on the camera even when attaching the external flash. • Some commercial external flashes have synchro terminals with high-voltage or reversed polarity. Using such extra flashes may cause a malfunction or the camera may not operate normally. • If you use commercially available external flashes with communication functions other than the dedicated one, they may not operate normally or they may be damaged. Do not use them.
13. Others External Microphone (optional) Using a stereo shotgun microphone (DMW-MS2: optional) or stereo microphone (VW-VMS10: optional), you can record sounds with quality superior to those recorded with the built-in microphone. Using the stereo shotgun microphone (DMW-MS2:optional), you can switch between the gun (ultra-directional) recording and the wide range stereo recording. Preparations: • Close the built-in flash, and then turn this unit off.
13. Others • While the external microphone is connected, [ ] is displayed on the screen. • When the external microphone is connected, [Mic Level Disp.] (P255) is automatically set to [ON], and the mic level is displayed on the screen. • When an external microphone is attached to the camera, do not hold only the external microphone to prevent the camera from falling. • When an external microphone is attached to the camera, do not open the built-in flash.
13. Others AC adaptor (optional)/DC coupler (optional) By connecting the AC adaptor (optional), and then plugging them into an electrical socket, you can connect this unit to a PC or printer and use without worrying about the capacity of the battery. To use the AC adaptor, a DC coupler (optional) is required. • Always use a genuine Panasonic AC adaptor (optional). • When using an AC adaptor, use the AC cable supplied with the AC adaptor.
13. Others Monitor Display/Viewfinder Display • The following images are examples of when the display screen is set to [ ] (monitor style) in the monitor. In recording 25p 4:3 L AFS ラュン Fn6 Fn7 × Fn8 MINI F SS Fn9 SNAP AEL 3.5 60 0 200 BKT AWB 98 1 STD.
13. Others Centre marker display (P219) 2 A› Quality (P141) AFS AFF AFC MF š Ø Focus Mode (P149) Self-timer¢5 (P201) Mic level display (P255) LMT OFF AF Mode (P151) Mic Level Limiter (OFF) (P256) Silent Mode (P212) Pull Focus (P253) External Microphone (P362) Face Recognition (P213) AFL AE Lock (P171) AEL AF Lock (P171) AE Burst (P182) Programme Shift (P93) 4K Photo (P185) 3.
13.
13. Others In recording On-monitor recording information 3 F 3.5 1/60 Single (P181) Burst (P182) 0 ISO AUTO 0 0 AFS 4:3 L 4K Photo (P185) Wi-Fi Fn 98 AWB 1 C1 1 Recording Mode (P46) Auto Bracket (P199) Self-timer (P201) AFS AFF AFC MF Focus Mode (P149, 165) š Ø AF Mode (P151) Quality (P141) A› 4:3 EXPS F3.
13. Others In playback Snap Movie (P251) 4:3 1 L 1/98 A› 1/98 67 '$< 0 200 AWB SLF Number of group pictures 8m30s Motion picture recording time¢1 (P258) 1 Picture number/Total pictures Connected to Wi-Fi PRQWK GD\V F3.
13. Others In playback Detailed information display 60 F3.5 0 AWB 200 WB ISO AFS P STD. 10:00 1.DEC.
13. Others In playback Histogram display F3.5 60 0 ISO200 1 1/98 100-0001 3 1/98 Histogram (P55) 2 Picture number/Total pictures 100-0001 Folder/File number¢3 (P349) Recording information¢3 ¢1 m: minute, s: second ¢2 It is displayed in order of [Title], [Location], [Name] ([Baby1]/[Baby2], [Pet]), [Name] ([Face Recog.]). ¢3 This is not displayed for motion pictures recorded in [AVCHD]. ¢4 This is not displayed for motion pictures.
13. Others Message Display Confirmation messages or error messages will be displayed on the screen in some cases. The major messages are described below as examples. [This picture is protected] • Delete the picture after cancelling the protect setting. (P287) [Some pictures cannot be deleted]/[This picture cannot be deleted] • This feature can only be used with pictures that comply with the DCF standard. Perform formatting (P33) on this unit after saving necessary data on a PC, etc.
13. Others [Memory Card Error]/[This memory card cannot be used] • Use a card compatible with this unit. (P22) [Insert SD card again]/[Try another card] • An error has occurred accessing the card. Insert the card again. • Insert a different card. [Read Error/Write Error Please check the card] • It has failed to read or write data. Remove the card after turning this unit off. Insert the card again, turn this unit on, and try to read or write the data again. • The card may be broken.
13. Others [Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV] • Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect. (P78) • This message also appears when the USB connection cable is connected to the camera only. In this case, connect the other end of the USB connection cable to a PC or a printer. (P348, 351) [Editing operation cannot proceed as another operation is taking place.
13. Others [Upload to the Cloud Folder is available after Cloud Sync settings have been set up on downloadable devices such as PCs or smartphones.] • Devices that download images from a cloud folder are not registered. • Perform Cloud Sync setting. Configure the settings on a PC with “PHOTOfunSTUDIO” or on a smartphone with “Image App”. Refer to P321 for details on [Cloud Sync. Service]. [Connection failed] • Check following regarding the smartphones you intend to connect.
13. Others Menu list [Rec] P376 [Setup] P384 [Motion Picture] P379 [Custom] P381 [Playback] P386 • [Photo Style], [Filter Settings], [AFS/AFF], [Metering Mode], [Highlight Shadow], [i.Dynamic], [i.Resolution], [Diffraction Compensation] and [Digital Zoom] are common to both the [Rec] menu and [Motion Picture] menu. Changing these settings in one of these menus is reflected in other menu. [Rec] [Photo Style] You can select effects to match the type of image you wish to record.
13. Others [iHDR] There is, for example, strong contrast between the background and the subject, multiple still pictures are recorded with differing exposures and combined to create a single still picture rich in gradation. P87 [HDR] You can combine 3 pictures with different levels of exposure into a single picture with rich gradation. P144 [Multi Exp.] Gives an effect like multi exposure.
13. Others [Digital Zoom] Increases the Tele effect. The higher the level of magnification, the greater the degradation in image quality. P227 [Color Space] Set this when you want to correct the colour reproduction of the recorded pictures on a PC, printer etc. P146 [Stabilizer] When camera shake is sensed during recording, the camera corrects it automatically. P222 [Face Recog.] Sets the focus and exposure automatically prioritising registered faces.
13. Others [Motion Picture] [Photo Style] You can select effects to match the type of image you wish to record. You can adjust the colour and image quality of the effects. P130 [Filter Settings] Changes the settings related to image effects (filters). P132 [Snap Movie] Lets you specify the recording time in advance and records motion pictures just like you take snapshots. P251 [Rec Format] Sets the file format for the motion pictures you record.
13. Others [Special Mic.] Sets the sound recording method when a stereo shotgun microphone (optional) is connected. P362 [Mic Level Limiter] Adjusts the sound input level automatically. P256 [Wind Noise Canceller] This will reduce the wind noise coming into the built-in microphone while maintaining sound quality. P256 [Wind Cut] Effectively reduces the wind noise when recording sound with an external microphone.
13. Others [Custom] [Cust.Set Mem.] Registers the current camera settings as custom set. P128 [Silent Mode] Disables operational sounds and output of light at once. P212 [AF/AE Lock] Sets the fixed content for focusing and exposure when the AF/AE lock is on. P172 [AF/AE Lock Hold] This will set the operation of [AF/AE LOCK] button when taking a picture with fixed focus or exposure.
13. Others [Histogram] This allows you to set either to display or not display the histogram. P53 [Guide Line] This will set the pattern of guide lines displayed when taking a picture. P53 [Center Marker] Displays [+], which indicates the centre of the recording screen. P219 [Highlight] When the Auto Review function is activated or when playing back, white saturated areas appear blinking in black and white.
13. Others [Remaining Disp.] This will switch display between the number of recordable pictures and available recording time. P35 [Auto Review] Displays a picture immediately after it is taken. P45 [Fn Button Set] You can assign various recording and other functions to the function button. P70 [Q.MENU] Switch the setting method of Quick Menu. P67 [Dial Set.] Changes the operation methods of the front dial and rear dial. P49 [Video Button] Enables/disables the motion picture button.
13. Others [Setup] [Clock Set] Setting Date/Time. P41 [World Time] Sets the times for the region where you live and your holiday destination. P73 [Travel Date] Departure date and return date of the trip as well as the name of the travel destination can be set. P74 [Wi-Fi] Configure the each setting for Wi-Fi functions. P337 [Beep] This allows you to set the volume for electronic sound and the electronic shutter sound.
13. Others [Reset Wi-Fi Settings] Reset all settings in the [Wi-Fi] menu to factory default settings. (Excluding [LUMIX CLUB]) P81 [Pixel Refresh] It will perform optimisation of imaging device and image processing. P81 [Sensor Cleaning] Dust reduction to blow off the debris and dust that have affixed to the front of the imaging device is performed. P81 [Format] The card is formatted.
13. Others [Playback] [2D/3D Settings] Switches the playback method for 3D images. [Slide Show] Selects the type etc. of the images and plays back in order. P267 [Playback Mode] Selects the type etc. of the images and plays back only particular images. P269 [Location Logging] You can write location information (longitude/latitude) on images sent from the smartphone. P270 [RAW Processing] You can convert the pictures taken in the RAW format into the JPEG format on the camera.
13. Others Troubleshooting First, try out the following procedures (P387 to P401). If the problem is not resolved, it may be improved by selecting [Reset] (P80) on the [Setup] menu. Battery and power source The camera cannot be operated even when it is turned on. The camera turns off immediately after it is turned on. • The battery is exhausted. > Charge the battery. • If you leave the camera on, the battery will be exhausted. > Turn the camera off frequently by using the [Economy] etc.
13. Others The recorded picture is whitish. • Picture might look whitish when lens or image sensor gets dirty with fingerprints or similar. > If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft, dry cloth. > Refer to P403 when the image sensor gets dirty. The recorded picture is too bright or dark. • Check that the exposure is correctly compensated. (P173) • Is the AE Lock (P171) applied incorrectly? Multiple pictures are taken at one time.
13. Others The recorded picture looks rough. Noise appears on the picture. • Try the following: > Take pictures in bright places. > Decrease the ISO sensitivity. (P175) > Increase the setting for [Noise Reduction] in [Photo Style] or lower the setting for each of the items other than [Noise Reduction]. (P131) > Set the [Long Shtr NR] to [ON].
13. Others Operation sound is small. • Is your finger covering up the speaker? (P18) Recording by Panorama Shot Mode is ended before finishing. • If the camera is moved too slowly, the camera has assumed that camera motion was stopped and will end the still picture recording. • If there is a great deal of shaking towards the recording direction while moving the camera, recording will end. 4K photo recording stops before finishing.
13. Others Sometimes it is difficult to focus with Auto Focus when recording 4K motion pictures. • This phenomenon occurs when the camera is trying to record with highly accurate focus at a reduced Auto Focus speed, and is not a malfunction. Striping or flicker appears under lighting such as a fluorescent or LED lighting fixture. The subject appears distorted. • This is characteristic of MOS sensors which serve as the camera’s pickup sensors. This is not a malfunction.
13. Others Lens Recorded image may be warped, or nonexistent colour is surrounding the subject. • Depending on the lens used, picture may be warped slightly or you may see colours along the edge depending on the zoom factor, due to the characteristics of the lens. Also, the peripherals of the image might look warped because the perspective is enhanced when the wide angle is used. This is not a malfunction.
13. Others Flash The flash is not activated. • Is the flash closed? > Open the flash. (P230) • When the electronic shutter is used, the flash is not activated. (P179) > Set [Electronic Shutter] to [OFF]. • When [Silent Mode] is set to [ON], the flash is not activated. (P212) > Set [Silent Mode] to [OFF]. The flash is activated 2 times. • (Except for when [Firing Mode] in [Flash] is set to [MANUAL]) The flash is activated 2 times.
13. Others Black, white, red, blue and green dots appear on the Monitor/Viewfinder. • This is not a malfunction. These pixels do not affect the recorded pictures. Noise appears on the monitor. • In dark places, noise may appear to maintain the brightness of the monitor. Unevenly bright parts or irregular colours appear on the Viewfinder. • Viewfinder of this unit adopts OLED.
13. Others The folder number and the file number are displayed as [—] and the screen turns black. • Is this a non-standard picture, a picture which has been edited using a PC or a picture which was taken by another make of digital camera? • Did you remove the battery immediately after picture-taking or did you take the picture using a battery with a low remaining charge? > To delete such pictures, make a backup of the data and format the card (P33). Playback sound or operation sound is too low.
13. Others Wi-Fi function A Wi-Fi connection cannot be established. Radio waves get disconnected. Wireless access point is not displayed. ∫ General tips for using a Wi-Fi connection • Use within the communication range of the device to be connected. • Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency operated nearby? > Radio waves may get interrupted when used simultaneously. Use them sufficiently away from the device.
13. Others This unit is not displayed in the Wi-Fi setting screen of the smartphone. • From the Wi-Fi setting menu on the smartphone, turn off and then on the Wi-Fi function. I have forgotten the login ID or password for the “LUMIX CLUB”. • Check the information in the login screen of “LUMIX CLUB”. http://lumixclub.panasonic.net/eng/c/ I do not have a wireless access point at my home, but I would like to perform service user registration of the “LUMIX CLUB”.
13. Others Images cannot be transmitted to the web service. • Confirm that the login information (login ID/user name/email address/password) is correct. • Web service server or the network may be busy. > Try again after a while. > Check the site of the web service you are sending the image to. It takes time to transmit an image to the web service. • Is the size of the image too large? > Reduce the image size at [Size] (P336), and then send.
13. Others I have forgotten the password for the Wi-Fi. • Execute the [Reset Wi-Fi Settings] in the [Setup] menu. (P81) However, all the information you have set on the [Wi-Fi Setup] menu will be reset. (excluding [LUMIX CLUB]) TV, PC and printer The picture does not appear on the television. • Is the camera connected to the TV correctly? (P341) > Set the TV input to external input mode. The picture is not displayed fully on the TV.
13. Others The card is not recognised by the PC. • Disconnect the USB connection cable. Connect it again while the card is inserted in the camera. • If there are two or more USB terminal on a single PC, try connecting the USB connection cable to another USB terminal. The card is not recognised by the PC. (SDXC memory card is used.) • Check if your PC is compatible with SDXC memory cards. http://panasonic.net/avc/sdcard/information/SDXC.
13. Others There is a sound from lens unit. • It is a sound of lens movement or aperture operation when this unit is turned on or off, and it is not a malfunction. • The sound, which is caused by the automatic adjustment of the aperture, is heard when the brightness has changed due to, for example, zooming or the movement of the camera. This is not a malfunction. An unreadable language was selected by mistake.
13. Others Cautions for Use Optimal use of the camera Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). • If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation. • Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
13. Others Cleaning Before cleaning the camera, remove the battery or the DC coupler (optional), or disconnect the power plug from the outlet. Then wipe the camera with a dry, soft cloth. • When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth, and then with a dry cloth. • Wipe off any dirt or dust on the zoom ring and the focus ring with a dry, dustless cloth. • Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc.
13. Others About the Monitor/Viewfinder • Do not press the monitor with excessive force. Uneven colours may appear on the monitor and it may malfunction. • If the camera is cold when you turn it on, the picture on the Monitor/Viewfinder will be slightly darker than usual at first. However, the picture will return to normal brightness when the internal temperature of the camera increases. Extremely high precision technology is employed to produce the Monitor/ Viewfinder screen.
13. Others Battery The battery is a rechargeable lithium ion battery. Its ability to generate power comes from the chemical reaction that takes place inside it. This reaction is susceptible to the surrounding temperature and humidity. If the temperature is too high or too low, the operating time of the battery will become shorter. Always remove the battery after use. • Place the removed battery in a plastic bag, and store or keep away from metallic objects (clips, etc.).
13. Others About 3D ∫ About 3D recording With the 3D interchangeable lens attached, do not record a subject at less than the minimum focus distance. • The 3D effects may be more pronounced, and therefore cause tiredness or discomfort. • When the 3D interchangeable lens (H-FT012: optional) is used, the minimum focus distance is 0.6 m (2.0 feet). When recording with the 3D interchangeable lens attached, be careful not to shake the unit.
13. Others About the personal information If a name or birthday is set for [Profile Setup]/Face Recognition function, this personal information is kept in the camera and recorded in the image. We recommend that you enable [Wi-Fi Password] and [Wi-Fi Function Lock] to protect personal information. (P337 , 338) Disclaimer • Information including personal information may be altered or vanish due to erroneous operation, effect of static electricity, accident, malfunction, repair, or other handlings.
13. Others About the picture data • Recorded data may be damaged or lost if the camera breaks down due to inappropriate handling. Panasonic will not be liable for any damage caused due to loss of recorded data. About tripods or unipods • When you use a tripod, make sure the tripod is stable when this unit is attached to it. • You may not be able to remove the card or the battery when using a tripod or unipod.
13. Others ∫ Do not use the camera in areas with magnetic fields, static electricity or interference • Do not use the camera in areas with magnetic fields, static electricity or interference, such as near microwave ovens. These may cause the interruption of the radio waves. • Using the camera near devices such as microwave ovens or cordless telephones that use the 2.4 GHz radio wave band may cause a decrease in performance in both devices.
13. Others • G MICRO SYSTEM is a lens exchange type digital camera system of LUMIX based on a Micro Four Thirds System standard. • Micro Four Thirds™ and Micro Four Thirds Logo marks are trademarks or registered trademarks of Olympus Imaging Corporation, in Japan, the United States, the European Union and other countries. • Four Thirds™ and Four Thirds Logo marks are trademarks or registered trademarks of Olympus Imaging Corporation, in Japan, the United States, the European Union and other countries.
13. Others • Android and Google Play are trademarks or registered trademarks of Google Inc. • The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi AllianceR. • The Wi-Fi Protected Setup™ Identifier mark is a certification mark of Wi-Fi AllianceR. • “Wi-FiR” and “Wi-Fi DirectR” are registered trademarks of Wi-Fi AllianceR. • “Wi-Fi Protected Setup™”, “WPA™”, and “WPA2™” are trademarks of Wi-Fi AllianceR.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
