Operating Instructions

37
VQT2S30
Preparation
• If it is set to [HOLD] when the camera is set to [ ] (P51) or [ ] (P77), switching of the playback
screen display (P58) or enlargement by rotating the rear dial is possible during Auto Review.
• The Auto Review function is activated regardless of its setting when set to [H] for Burst Mode
(P73), for Auto Bracket (P75) and for still pictures with audio (P134). (Will not hold) Also, you
cannot set the Auto Review function.
• If [HIGHLIGHT] (P136) is set to [ON], white saturated areas appear blinking in black and white
when the Auto Review function is activated.
• [AUTO REVIEW] does not work during Burst Mode when set to [M] or [L] or during recording
motion pictures.
• When [AUTO REGISTRATION] in [FACE RECOG.] (P117) is set to [ON], [AUTO REVIEW] can
only be set to [3SEC.] or [5SEC.].
• When [PC] is selected, the camera is connected via the “USB Mass Storage” communication system.
• When [PictBridge(PTP)] is selected, the camera is connected via the “PTP (Picture Transfer
Protocol)” communication system.
• This will work when the AV cable is connected.
o [AUTO REVIEW]
Set the length of time that the picture is displayed after taking it.
[OFF]/[1SEC.]/[3SEC.]/[5SEC.]
[HOLD]:
The pictures are displayed until shutter button is pressed halfway.
x [USB MODE]
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
[TV ASPECT]
Set to match the type of TV.
[W]: When connecting to a 16:9 screen TV.
[X]: When connecting to a 4:3 screen TV.
[HDMI MODE]
Set the format for the HDMI output when playing back on the
HDMI compatible high-definition TV connected with this unit using
the HDMI mini cable (optional).
[AUTO]:
The output resolution is automatically set based on the
information from the connected TV.
[1080i]:
The interlace method with 1080 available scan lines is used for output.
[720p]:
The progressive method with 720 available scan lines is used for
output.
[480p]:
The progressive method with 480 available scan lines is used for output.
DMC-G2KPP-VQT2S30_eng.book 37 ページ ２０１０年４月１３日 火曜日 午後９時２０分