DMC-G10KPP-VQT2S62_eng.book 1 ページ ２０１０年４月２３日 金曜日 午後８時０分 Operating Instructions Digital Camera/Lens Kit Model No. DMC-G10K Before connecting, operating or adjusting this product, please read the instructions completely. For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo For Canadian assistance, please call: 1-800-99-LUMIX (1-800-995-8649) or send e-mail to: lumixconcierge@ca.panasonic.
DMC-G10KPP-VQT2S62_eng.book 2 ページ ２０１０年４月２３日 金曜日 午後８時０分 Dear Customer, Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the model and serial numbers in the space below. The serial number is on the tag located on the underside of your Camera. Be sure to retain this manual as your convenient Camera information source.
DMC-G10KPP-VQT2S62_eng.book 3 ページ ２０１０年４月２３日 金曜日 午後８時０分 THE FOLLOWING APPLIES ONLY IN CANADA. This Class B digital apparatus complies with Canadian ICES-003. THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
DMC-G10KPP-VQT2S62_eng.book 4 ページ ２０１０年４月２３日 金曜日 午後８時０分 ∫ About the battery pack CAUTION Battery pack (Lithium ion battery pack) • Use the specified unit to recharge the battery pack. • Do not use the battery pack with equipment other than the specified unit. • Do not get dirt, sand, liquids, or other foreign matter on the terminals. • Do not touch the plug terminals (i and j) with metal objects. • Do not disassemble, remodel, heat or throw into fire.
DMC-G10KPP-VQT2S62_eng.book 5 ページ ２０１０年４月２３日 金曜日 午後８時０分 • The battery charger is in the standby condition when the AC power supply cord is connected. The primary circuit is always “live” as long as the power cord is connected to an electrical outlet. ∫ Care of the camera • Do not strongly shake or bump the camera by dropping or hitting it. Do not subject to strong pressure.
DMC-G10KPP-VQT2S62_eng.book 6 ページ ２０１０年４月２３日 Contents Information for Your Safety....................... 2 Before Use Standard Accessories............................... 9 Names of the Components..................... 11 Operating the Rear Dial.......................... 14 About the Lens ....................................... 15 Preparation Attaching/Detaching the Lens................. 17 Attaching the Lens Hood ........................ 19 Attaching the Shoulder Strap..................
DMC-G10KPP-VQT2S62_eng.book 7 ページ ２０１０年４月２３日 Taking Pictures by Specifying the Aperture/Shutter Speed .................... 84 • Aperture-priority AE .......................... 84 • Shutter-priority AE.............................84 Taking Picture by Setting the Exposure Manually..................................................85 Confirm the Effects of Aperture and Shutter Speed (Preview Mode)............... 87 Taking Expressive Portraits and Landscape Pictures (Advanced Scene Mode)..............
DMC-G10KPP-VQT2S62_eng.book 8 ページ ２０１０年４月２３日 Connecting to other equipment Playing Back Pictures on a TV Screen .....146 • Playing back pictures using the AV cable (supplied).............................. 146 • Playing back pictures on a TV with an SD Memory Card slot................ 147 • Playing back on the TV with HDMI socket............................................. 147 Connecting to a PC .............................. 152 Printing the Pictures .............................
DMC-G10KPP-VQT2S62_eng.book 9 ページ ２０１０年４月２３日 金曜日 午後８時０分 Before Use Before Use Standard Accessories Check that all the accessories are included before using the camera. Product numbers correct as of April 2010. These may be subject to change. 1 Digital Camera Body (This is referred to as camera body in these operating instructions.) 2 Interchangeable Lens “LUMIX G VARIO 14 – 42 mm/F3.5 – 5.6 ASPH./MEGA O.I.S.” (This is referred to as lens in these operating instructions.
DMC-G10KPP-VQT2S62_eng.
DMC-G10KPP-VQT2S62_eng.book 11 ページ ２０１０年４月２３日 金曜日 午後８時０分 Before Use Names of the Components ∫ Camera body 1 Flash (P57) 2 Sensor 3 Self-timer indicator (P68) AF Assist Lamp (P126) 4 Lens release button (P18) 5 Lens lock pin 6 Mount 7 Lens fitting mark (P17) 1 2 7 6 3 5 4 Rear dial is described as follows in these operating instructions. e.g.: Rotating left or right e.g.: Pressing the rear dial • Refer to P14 for operation of the rear dial.
DMC-G10KPP-VQT2S62_eng.book 12 ページ ２０１０年４月２３日 金曜日 午後８時０分 Before Use Assign Menu to 4 button. It is convenient to register a Menu that is used often. [FILM MODE]/[ASPECT RATIO]/[QUALITY]/[METERING MODE]/[I.RESOLUTION]/ [I.EXPOSURE]/[EX. OPT. ZOOM]/[GUIDE LINE] 1/WB (White Balance) (P76) In these operating instructions, the cursor buttons are described as shown in the figure below or described with 3/4/2/1. e.g.
DMC-G10KPP-VQT2S62_eng.book 13 ページ ２０１０年４月２３日 金曜日 午後８時０分 Before Use 37 Card/Battery door (P24) 38 Release lever (P24) 39 Tripod receptacle (P169) • When you use a tripod, make sure the tripod is stable when the camera is attached to it. 37 38 39 ∫ Lens H-FS014042 (LUMIX G VARIO 14– 42 mm/F3.5 – 5.6 ASPH./MEGA O.I.S.
DMC-G10KPP-VQT2S62_eng.book 14 ページ ２０１０年４月２３日 金曜日 午後８時０分 Before Use Operating the Rear Dial There are 2 ways to operate the rear dial, rotating left or right, and by pressing. Rotating: Selection of items or setting of values is performed during the various settings. Pressing: Operations that are the same as [MENU/SET] button, such as selection of settings and exiting the menu, are performed during the various settings.
DMC-G10KPP-VQT2S62_eng.book 15 ページ ２０１０年４月２３日 金曜日 午後８時０分 Before Use About the Lens This unit can use the dedicated lenses compatible with the Micro Four Thirds™ System lens mount specification (Micro Four Thirds mount). Select a lens that matches the scene being recorded and your use of the pictures. ∫ “Micro Four Thirds Mount” This is the lens mount standard for the “Micro Four Thirds System”. This was newly developed as an interchangeable lens mount dedicated for digital cameras.
DMC-G10KPP-VQT2S62_eng.
DMC-G10KPP-VQT2S62_eng.book 17 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation Preparation Attaching/Detaching the Lens • Check that the camera is turned off. • Close the flash. Attaching a lens to the camera body Turn the lens rear cap A and the body cap B in the direction of the arrow to detach them. • Do not put your hands inside the mount. Align the lens fitting marks C (red marks) on the camera body and the lens and then rotate the lens in the direction of the arrow until it clicks.
DMC-G10KPP-VQT2S62_eng.book 18 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation ∫ Optical Image Stabilizer The lens included in DMC-G10K has a stabilizer function. • There is no [O.I.S.] switch on the 14 – 42 mm/F3.5 – 5.6 lens included in DMC-G10K. Set the [STABILIZER] settings in the [REC] Mode menu. (P116) When using a lens with an [O.I.S.] switch, it is possible to set to enable the Optical Image Stabilizer by switching the [O.I.S.] switch on the lens to [ON]. Example when a lens with the [O.I.S.
DMC-G10KPP-VQT2S62_eng.book 19 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation Attaching the Lens Hood In bright sunlight or backlight, the lens hood will minimize lens flare and ghosting. The lens hood cuts off excess lighting and improves the picture quality. • Check that the camera is turned off. • Close the flash. To attach the lens hood (flower shape) that came with the 14 – 42 mm/F3.5 –5.
DMC-G10KPP-VQT2S62_eng.book 20 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation Attaching the Shoulder Strap • We recommend attaching the shoulder strap when using the camera to prevent it from dropping. Pass the shoulder strap through the shoulder strap eyelet on the camera body. A: Shoulder strap eyelet Pass the end of the shoulder strap through the ring in the direction of the arrow and then pass it through the stopper. Pass the end of the shoulder strap through the hole on the other side of the stopper.
DMC-G10KPP-VQT2S62_eng.book 21 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation Charging the Battery ∫ About batteries that you can use with this unit The battery that can be used with this unit is DMW-BLB13PP. It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards.
DMC-G10KPP-VQT2S62_eng.book 22 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation ∫ About the [CHARGE] indicator The [CHARGE] indicator turns on: The [CHARGE] indicator turns off: The [CHARGE] indicator A is turned on and charging will start. The [CHARGE] indicator A of the charger will turn off once the charging has completed without any problem. • When the [CHARGE] indicator flashes – The battery temperature is too high or too low.
DMC-G10KPP-VQT2S62_eng.book 23 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation Approximate operating time and number of recordable pictures ∫ Recording still pictures (when using the LCD monitor) (By CIPA standard in Program AE Mode) When the 14 – 42 mm/F3.5 – 5.6 lens included in DMC-G10K is used Number of recordable pictures Approx. 380 pictures Recording time Approx. 190 min ∫ Recording still pictures (when using the viewfinder) (By CIPA standard in Program AE Mode) When the 14 – 42 mm/F3.5 – 5.
DMC-G10KPP-VQT2S62_eng.book 24 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation Inserting and Removing the Card (optional)/the Battery • Check that this unit is turned off. • Close the flash. • We recommend using a Panasonic card. Slide the release lever in the direction of the arrow and open the card/battery door. • Always use genuine Panasonic batteries (DMW-BLB13PP). • If you use other batteries, we cannot guarantee the quality of this product.
DMC-G10KPP-VQT2S62_eng.book 25 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation About the Card Access to the card The access indication lights red when pictures are being recorded on the card. Card The following cards which conform to the SD video standard can be used with this unit. (These cards are indicated as card in the text.
DMC-G10KPP-VQT2S62_eng.book 26 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation Setting Date/Time (Clock Set) • The clock is not set when the camera is shipped. Turn the camera on. A [MENU/SET] button ON OFF Press [MENU/SET]. Press 2/1 to select the items (year, month, day, hour, minute, display sequence or time display format), and press 3/4 to set. : : A: Time at the home area B: Time at the travel destination (P112) ‚: Cancel without setting the clock.
DMC-G10KPP-VQT2S62_eng.book 27 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation Note • The clock is displayed when [DISPLAY] is pressed several times during recording. • You can set the year from 2000 to 2099. • If the clock is not set, the correct date cannot be printed when you stamp the date on the pictures with [TEXT STAMP] (P136) or order a photo studio to print the pictures. • If the clock is set, the correct date can be printed even if the date is not displayed on the screen of the camera.
DMC-G10KPP-VQT2S62_eng.book 28 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation Setting menu items This section describes how to select the [REC] Mode menu settings, and the same setting procedure can be used for the [MOTION PICTURE] Mode menu, [CUSTOM] menu, [SETUP] menu, [MY MENU] menu and [PLAYBACK] Mode menu as well. • If you set [MENU RESUME] (P128) in the [CUSTOM] menu to [ON], the screen shows the last selected menu item when the camera was turned off. It is set to [ON] at the time of purchase.
DMC-G10KPP-VQT2S62_eng.book 29 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation Press 3/4 or rotate the rear dial to select [I.EXPOSURE]. • Select the item at the very bottom, and press 4 or rotate the rear dial right to move to the next screen. or Press 1 or the rear dial. • Depending on the item, its setting may not appear or it may be displayed in a different way. or Press 3/4 or rotate the rear dial to select [HIGH]. or Press [MENU/SET] or the rear dial to set. or Press [MENU/SET] to close the menu.
DMC-G10KPP-VQT2S62_eng.book 30 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation Setting the Quick Menu By using the Quick Menu, some of the menu settings can be easily found. • The features that can be adjusted using Quick Menu are determined by the mode or a display style the camera is in. Press [Q.MENU] to display the Quick Menu in recording status. Press 3/4/2/1 or rotate the rear dial to select the menu item and the setting.
DMC-G10KPP-VQT2S62_eng.book 31 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation Perform these settings if you need to. About the Setup Menu [CLOCK SET], [ECONOMY] and [AUTO REVIEW] are important items. Check their settings before using them. • In the Intelligent Auto Mode, only [CLOCK SET], [WORLD TIME], [BEEP], [LCD MODE] and [LANGUAGE] can be set. For details on how to select the [SETUP] menu settings, refer to P28. U [CLOCK SET] Setting Date/Time. • Refer to P26 for details.
DMC-G10KPP-VQT2S62_eng.book 32 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation These menu settings make it easier to see the LCD monitor when you are in bright places. LCD [LCD MODE] [OFF] „ [AUTO POWER LCD]: The brightness is adjusted automatically depending on how bright it is around the camera. … [POWER LCD]: The LCD monitor becomes brighter and easier to see even when taking pictures outdoors.
DMC-G10KPP-VQT2S62_eng.book 33 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation Set the length of time that the picture is displayed after taking it. o [AUTO REVIEW] [OFF]/[1SEC.]/[3SEC.]/[5SEC.] [HOLD]: The pictures are displayed until shutter button is pressed halfway. • If it is set to [HOLD] when the camera is set to [ ] (P43) or [ ] (P68), switching of the playback screen display (P50) or enlargement by rotating the rear dial is possible during Auto Review.
DMC-G10KPP-VQT2S62_eng.book 34 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation Set the format for the HDMI output when playing back on the HDMI compatible high-definition TV connected with this unit using the HDMI mini cable (optional). [HDMI MODE] [AUTO]: The output resolution is automatically set based on the information from the connected TV. [1080i]: The interlace method with 1080 available scan lines is used for output. [720p]: The progressive method with 720 available scan lines is used for output.
DMC-G10KPP-VQT2S62_eng.book 35 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation ~ [LANGUAGE] Set the language displayed on the screen. [ENGLISH]/[FRANÇAIS]/[ESPAÑOL]/[PORTUGUÊS] • If you set a different language by mistake, select [~] from the menu icons to set the desired language. [VERSION DISP.] This enables the firmware versions of the camera and lens to be checked. • [–. –] is displayed as the lens firmware when the lens is not mounted. v [NO.RESET] Reset the file number of the next recording to 0001.
DMC-G10KPP-VQT2S62_eng.book 36 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation Holding and using Your Camera Tips for taking good pictures • Do not cover the flash, the AF Assist Lamp A or the microphone B with your fingers or other objects. • Hold the camera gently with both hands, keep your arms still at your side and stand with your feet slightly apart. • Be careful not to move the camera when you press the shutter button. • Do not touch the front of the lens.
DMC-G10KPP-VQT2S62_eng.book 37 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation ∫ Diopter adjustment Adjust the diopter to suit your vision so that you can see the viewfinder clearly. Look at the display on the viewfinder and rotate the diopter adjustment dial to where the screen is clearest. Note • The eye cup cannot be removed. Please read P166 for the cleaning and care. AFS P 0 AUTO AWB 9 Mode switching Selecting the [REC] Mode ∫ To select Intelligent Auto Mode Press [¦] A.
DMC-G10KPP-VQT2S62_eng.book 38 ページ ２０１０年４月２３日 金曜日 午後８時０分 Preparation ∫ List of [REC] Modes Program AE Mode (P43) The subjects are recorded using your own settings. Aperture-Priority AE Mode (P84) The shutter speed is automatically determined by the aperture value you set. Shutter-Priority AE Mode (P84) The aperture value is automatically determined by the shutter speed you set. Manual Exposure Mode (P85) The exposure is adjusted by the aperture value and the shutter speed which are manually adjusted.
DMC-G10KPP-VQT2S62_eng.book 39 ページ ２０１０年４月２３日 金曜日 午後８時０分 Basic [REC] Mode: ñ Basic Taking Pictures using the Automatic Function (ñ: Intelligent Auto Mode) The camera will set the most appropriate settings to match the subject and the recording conditions so we recommend this mode for beginners or those who want to leave the settings to the camera and take pictures easily. • The following functions are activated automatically.
DMC-G10KPP-VQT2S62_eng.book 40 ページ ２０１０年４月２３日 金曜日 午後８時０分 Basic Press the shutter button fully (push it in further), and take the picture. • In Intelligent Auto Mode, [FOCUS PRIORITY] (P126) is fixed to [ON]. This means you cannot take pictures until the subject is in focus. • The access indication (P25) lights red when pictures are being recorded on the card. ∫ When taking pictures using the flash (P57) • Open the flash when the flash is to be used.
DMC-G10KPP-VQT2S62_eng.book 41 ページ ２０１０年４月２３日 金曜日 午後８時０分 Basic Note • Due to conditions such as the ones below, a different scene may be identified for the same subject.
DMC-G10KPP-VQT2S62_eng.book 42 ページ ２０１０年４月２３日 金曜日 午後８時０分 Basic • The settings of the following items are fixed. Item [ECONOMY] ([SLEEP MODE]) (P32) Settings [5MIN.
DMC-G10KPP-VQT2S62_eng.book 43 ページ ２０１０年４月２３日 金曜日 午後８時０分 Basic [REC] Mode: ³ Taking Pictures with Your Favorite Settings ( : Program AE Mode) The camera automatically sets the shutter speed and the aperture value according to the brightness of the subject. You can take pictures with greater freedom by changing various settings in the [REC] menu. • Set the drive mode lever to [ ]. Set the mode dial to [ ].
DMC-G10KPP-VQT2S62_eng.book 44 ページ ２０１０年４月２３日 金曜日 午後８時０分 Basic Setting the Focus Mode (AFS/AFC/MF) Fix the focus by pressing the shutter button halfway (AFS) Set the focus mode dial to [AFS]. • “AFS” is an abbreviation of “Auto Focus Single”. The focus is adjusted when you press the shutter button halfway. • Normally use the [AFS]. • Focus during the Burst Mode is fixed at the first picture. Refer to P64 for details.
DMC-G10KPP-VQT2S62_eng.book 45 ページ ２０１０年４月２３日 金曜日 午後８時０分 Basic Focusing Align the subject to the screen, and then press the shutter button halfway.
DMC-G10KPP-VQT2S62_eng.book 46 ページ ２０１０年４月２３日 金曜日 午後８時０分 Basic Program Shift In Program AE Mode, you can change the preset aperture value and shutter speed without changing the exposure. This is called Program Shift. You can make the background more blurred by decreasing the aperture value or record a moving subject more dynamically by slowing the shutter speed when taking a picture in Program AE Mode.
DMC-G10KPP-VQT2S62_eng.book 47 ページ ２０１０年４月２３日 金曜日 午後８時０分 Basic [REC] Mode: Taking Pictures with the Zoom Using the Optical Zoom/using the Extended Optical Zoom (EZ)/ using the Digital Zoom You can zoom-in to make people and objects appear closer or zoom-out to record landscapes in wide angle. To make subjects appear closer use (Tele) Rotate the zoom ring towards Tele. (P13) To make subjects appear further away use (Wide) Rotate the zoom ring towards Wide. (P13) To enlarge further, set the [EX. OPT.
DMC-G10KPP-VQT2S62_eng.book 48 ページ ２０１０年４月２３日 金曜日 午後８時０分 Basic ∫ Types of zooms Feature Optical Zoom Extended Optical Zoom (EZ) Digital Zoom When the 14– 42 mm/F3.5 – 5.6 lens included in DMC-G10K is used Recording magnification Picture quality Conditions 3k [2k] (including Extended Optical Zoom) when taking still pictures: 12k¢1 when recording motion pictures: 18.7k¢2 2k¢1 (when taking still pictures: 6k) 3.1k¢2 (when recording [4k] (including Extended motion pictures: 9.
DMC-G10KPP-VQT2S62_eng.book 49 ページ ２０１０年４月２３日 金曜日 午後８時０分 Basic Playing Back Pictures Press [(]. A [(] button Press 2/1 to select the picture. 2: Play back the previous picture 1: Play back the next picture • Speed of picture forwarding/rewinding changes depending on the playback status. • If you press and hold 2/1, you can play back the pictures in succession. ∫ To finish playback Press [(] again or press the shutter button halfway.
DMC-G10KPP-VQT2S62_eng.book 50 ページ ２０１０年４月２３日 金曜日 午後８時０分 Basic Changing the information displayed on the playback screen Press [DISPLAY] to switch the monitor screen. A [DISPLAY] button • When the menu screen appears, the [DISPLAY] button is not activated. During Playback Zoom (P51), while playing back motion pictures (P130) and during a slide show (P131), you can only select “Normal display B” or “No display F”. • Refer to P56 for information about the histogram D. 30 F3.
DMC-G10KPP-VQT2S62_eng.book 51 ページ ２０１０年４月２３日 金曜日 午後８時０分 Basic Displaying Pictures by Recording Date (Calendar Playback) You can display pictures by recording date. Rotate the rear dial left to display the calendar screen. Press 3/4/2/1 to select the date to be played back. • If there were no pictures recorded during a month, the month is not displayed. Press [MENU/SET] or the rear dial to display the pictures that were recorded on the selected date.
DMC-G10KPP-VQT2S62_eng.book 52 ページ ２０１０年４月２３日 金曜日 午後８時０分 Basic ∫ Switching the displayed image while maintaining the Playback Zoom You can switch the displayed image while maintaining the same zoom magnification and zoom position for the Playback Zoom. Switch to picture select operation by pressing the rear dial during Playback Zoom, and select pictures with 2/1. • It will switch between picture select operation and move zoom position operation every time the rear dial is pressed during Playback Zoom.
DMC-G10KPP-VQT2S62_eng.book 53 ページ ２０１０年４月２３日 金曜日 午後８時０分 Basic To delete multiple pictures (up to 50) or all the pictures Press [‚]. Press 3/4 to select [DELETE MULTI] or [DELETE ALL] and then press [MENU/SET]. • [DELETE ALL] > step 5. Press 3/4/2/1 to select the picture, and then press [DISPLAY] to set. (Repeat this step.) • [‚] appears on the selected pictures. If [DISPLAY] is pressed again, the setting is canceled. Press [MENU/SET]. Press 3 to select [YES] and then press [MENU/SET] to set.
DMC-G10KPP-VQT2S62_eng.book 54 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Advanced (Recording pictures) Switching the Display of the LCD Monitor/ Viewfinder Switching the Information Displayed on the recording screen Press [DISPLAY] to change. A [DISPLAY] button • When the menu screen appears, the [DISPLAY] button is not activated. LCD monitor display With the [LCD DISP.
DMC-G10KPP-VQT2S62_eng.book 55 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Viewfinder display With the [LVF DISP.STYLE] (P127) of the [CUSTOM] menu, you can choose the displayed screen on the viewfinder to display in [ ] (viewfinder style) or [ ] (LCD monitor style).
DMC-G10KPP-VQT2S62_eng.book 56 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) ∫ Recording guide line When you align the subject on the horizontal and vertical guide lines or the cross point of these lines, you can take pictures with well-designed composition by viewing the size, the slope and the balance of the subject. A [ ]: This is used when dividing the entire screen into 3k3 for taking pictures with a well-balanced composition.
DMC-G10KPP-VQT2S62_eng.book 57 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) ∫ Set the position of the histogram • Set the [HISTOGRAM] in the [CUSTOM] menu to [ON]. (P124) 1 Press [Q.MENU] to display the Quick Menu. (P30) 2 Press 2/1 to select histogram, and then press [MENU/SET]. • You can also use the rear dial to set. 3 Press 3/4/2/1 to set the position. 4 Press [MENU/SET] to finish the setting. 5 Press [Q.MENU] to close the Quick Menu.
DMC-G10KPP-VQT2S62_eng.book 58 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Press 3/4 to select a mode and press [MENU/SET]. • For information about flash settings that can be selected, refer to “Available flash settings by Recording Mode”. (P59) Press [MENU/SET] to close the menu. • You can also press the shutter button halfway to close the menu. Item Description of settings The flash is automatically activated when the recording conditions make ‡: AUTO it necessary.
DMC-G10KPP-VQT2S62_eng.book 59 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) ∫ About the Digital Red-Eye Correction When [RED-EYE REMOVAL] (P117) has been set to [ON] and Red-Eye Reduction ([ ], [ ], [ ]) is selected, Digital Red-Eye Correction is performed whenever the flash is used. The camera automatically detects red-eye and corrects the picture. (Only available when the AF Mode is set to [š] and face detection is active) • Under certain circumstances, red-eye cannot be corrected.
DMC-G10KPP-VQT2S62_eng.book 60 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) ∫ The available flash range to take pictures • The available flash range is an approximation. When the 14 – 42 mm/F3.5 – 5.6 lens included in DMC-G10K is used ISO sensitivity Available flash range Wide Tele 30 cm (0.99 feet) to 3.9 m (12.8 feet)¢ AUTO 45 cm (1.48 feet) to 6.2 m (20.3 feet)¢ ISO100 45 cm (1.48 feet) to 3.1 m (10.2 feet) 30 cm (0.99 feet) to 1.9 m (6.23 feet) ISO200 45 cm (1.48 feet) to 4.
DMC-G10KPP-VQT2S62_eng.book 61 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) • When you use certain lenses, light from the flash may be blocked or fail to cover the lens field of view, causing dark areas to appear in the resulting pictures. • When taking a picture with the flash, we recommend removing the lens hood. In some cases it may not allow the scene to be illuminated properly. • It may take time to charge the flash if you repeat taking a picture.
DMC-G10KPP-VQT2S62_eng.book 62 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Setting to the 2nd Curtain Synchro Applicable modes: 2nd curtain synchro activates the flash just before the shutter closes when taking pictures of moving objects such as cars using a slow shutter speed. Select [FLASH SYNCHRO] in the [REC] Mode menu. (P28) Press 4 to select [2ND] and then press [MENU/SET]. Press [MENU/SET] to close the menu. • You can also press the shutter button halfway to close the menu.
DMC-G10KPP-VQT2S62_eng.book 63 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [REC] Mode: Compensating the Exposure Use this function when you cannot achieve appropriate exposure due to the difference in brightness between the subject and the background. Look at the following examples. Underexposed Properly exposed Overexposed Compensate the exposure towards positive. Compensate the exposure towards negative. Press the rear dial to switch to Exposure Compensation operation.
DMC-G10KPP-VQT2S62_eng.book 64 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [REC] Mode: Taking Pictures using Burst Mode Pictures are taken continuously while the shutter button is pressed. Select the ones you really like from among the pictures you have taken. Set the drive mode lever to [ ]. A Focus on the subject and take a picture. A When Burst Mode is set to high speed [H]. • Hold down the shutter button fully to activate the Burst Mode.
DMC-G10KPP-VQT2S62_eng.book 65 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) ∫ Focusing in Burst Mode The focus changes depending on the setting for [FOCUS PRIORITY] (P126) in the [CUSTOM] menu and the Focus Mode setting. Focus Mode AFS AFC¢1 MF Focus Priority ON OFF Focus At the first picture ON Normal focusing¢2 OFF Predicted focusing¢3 — Focus set with Manual Focus ¢1 When subject is dark, the focus is fixed on the first picture.
DMC-G10KPP-VQT2S62_eng.book 66 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [REC] Mode: Taking Pictures using Auto Bracket Maximum of 7 pictures will be recorded with different exposure settings following the Exposure Compensation range every time the shutter button is pressed. You can select the picture with the desired exposure among different exposures.
DMC-G10KPP-VQT2S62_eng.book 67 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) ∫ Changing the settings for [STEP] and [SEQUENCE] in Auto Bracket 1 2 Select [AUTO BRACKET] in the [REC] Mode menu. (P28) Press 3/4 to select [STEP] or [SEQUENCE] and then press 1. 3 Press 3/4 to select the setting and then press [MENU/SET].
DMC-G10KPP-VQT2S62_eng.book 68 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [REC] Mode: Taking Pictures with the Self-timer Set the drive mode lever to [ë]. Press the shutter button halfway to focus and then press it fully to take the picture. A When self-timer is set to [ A ]. • A picture is not taken until the subject is brought into focus. Focus and exposure will be set when the shutter button is pressed halfway.
DMC-G10KPP-VQT2S62_eng.book 69 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) • Operation will be same as [ ] even if it is set to [ ] while Multi Film Bracket recording (P83). • Use the Quick Menu (P30) to set when in Intelligent Auto Mode. • Self-timer cannot be set to [ ] in Intelligent Auto Mode. [REC] Mode: Setting the Method used to Focus (AF Mode) This allows the focusing method that suits the positions and number of the subjects to be selected.
DMC-G10KPP-VQT2S62_eng.book 70 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Note • When the subject is not in the center of the composition in [Ø], you can bring the subject into the AF area, fix the focus and exposure by pressing the shutter button halfway, move the camera to the composition you want with the shutter button pressed halfway, and then take the picture.
DMC-G10KPP-VQT2S62_eng.book 71 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Setting up [ Bring the subject to the AF Tracking frame, and press the shutter button halfway to lock the subject. ] (AF Tracking) Before locking Locked A AF Tracking frame (White) B AF Tracking frame (Yellow) A B • When the subject is recognized, AF area will turn green and the subject will be locked.
DMC-G10KPP-VQT2S62_eng.book 72 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Setting the AF area AF area can be moved when [Ø] is selected. The size of AF area can also be changed. Select [Ø] and then press 4. • AF area setting screen is displayed. It will return to previous screen by pressing [DISPLAY]. Press 3/4/2/1 to move the AF area. • You can set to arbitrary position of the screen. (It cannot be set to edge of the screen) • The AF area returns to the center when [‚] is pressed.
DMC-G10KPP-VQT2S62_eng.book 73 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [REC] Mode: Taking Pictures with Manual Focus Use this function when you want to fix the focus or when the distance between the lens and the subject is determined and you do not want to activate Auto Focus. Set the focus mode dial to [MF]. •[ ] is displayed on a screen for about 5 seconds. Rotate the focus ring to focus on the subject.
DMC-G10KPP-VQT2S62_eng.book 74 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) ∫ Technique for Manual Focus 1 Rotate the focus ring to focus on the subject. 2 Rotate it a little more. 3 Finely focus on the subject by rotating the focus ring slowly in reverse. ∫ About the focus distance reference mark The focus distance reference mark is a mark used to measure the focus distance. Use this when taking pictures with Manual Focus or taking close-up pictures.
DMC-G10KPP-VQT2S62_eng.book 75 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [REC] Mode: Fixing the Focus and the Exposure (AF/AE Lock) This is useful when you want to take a picture of a subject outside the AF area or the contrast is too strong and you cannot achieve appropriate exposure. ∫ Fixing the exposure only Align the screen with the subject. Press and hold [AF/AE LOCK] to fix the exposure. A [AF/AE LOCK] button • The aperture value and the shutter speed light.
DMC-G10KPP-VQT2S62_eng.book 76 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Note • If you set [AF/AE LOCK HOLD] in the [CUSTOM] menu to [ON], you can fix the focus and the exposure even if you release [AF/AE LOCK] after pressing it. (P125) • The brightness of the image displayed on the LCD monitor/viewfinder (Live View) will be also locked when the AE lock is performed. • AF Lock only is effective when taking pictures in Manual Exposure Mode.
DMC-G10KPP-VQT2S62_eng.book 77 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) ∫ Auto White Balance Depending on the conditions prevailing when pictures are taken, the pictures may take on a reddish or bluish tinge. Furthermore, when a multiple number of light sources are being used or there is nothing with a color close to white, Auto White Balance may not function properly. In a case like this, set the White Balance to a mode other than [AWB]. 1 Auto White Balance will work within this range.
DMC-G10KPP-VQT2S62_eng.book 78 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Setting the color temperature You can set the color temperature manually for taking natural pictures in different lighting conditions. The color of light is measured as a number in degrees Kelvin. As the color temperature increases, the picture becomes more bluish. As the color temperature decreases, the picture becomes more reddish. Select [ ] and then press 3.
DMC-G10KPP-VQT2S62_eng.book 79 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) White Balance Bracket Bracket setting is performed based on the adjustment values for the White Balance fine adjustment, and 3 pictures with different colors are automatically recorded when the shutter button is pressed once. Finely adjust the White Balance in step 2 of the “Finely adjusting the White Balance” procedure, and rotate the rear dial to set the bracket.
DMC-G10KPP-VQT2S62_eng.book 80 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) ISO sensitivity Recording location (recommended) 100 6400 When it is light (outdoors) When it is dark Shutter speed Slow Fast Noise Less Increased ISO sensitivity Settings AUTO¢ The ISO sensitivity is automatically adjusted according to the brightness. ¢ (Intelligent) The ISO sensitivity is adjusted according to the movement of the subject and the brightness.
DMC-G10KPP-VQT2S62_eng.book 81 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [REC] Mode: Change Tone of the Color for the Picture to be taken (Film Mode) [You can only select [STANDARD] and [STANDARD] ( ) in [ ], [¿], [ ], [ ], [ ], [ ] and [ ] Mode.] Just as each type of film for film cameras has its own color tone and contrast characteristics, Film Mode allows you to select up to 9 different “digital films”, color tones, in the same way as you would select different films for film cameras.
DMC-G10KPP-VQT2S62_eng.book 82 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Adjusting each Film Mode to the desired setting Press 2/1 to select a film. Press 3/4 to select an item and 2/1 to adjust. • You can also use the rear dial to adjust. • Registered settings are memorized even if the camera is turned off. Press 3/4 to select the [MEMORY] and then press [MENU/SET]. Press 3/4 to select an item, and then press [MENU/SET]. • You can register 2 settings.
DMC-G10KPP-VQT2S62_eng.book 83 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Multi Film Bracket It will take pictures changing the type of film in accordance with the setting every time the shutter button is pressed. (Up to 3 pictures) Press 2/1 to select [MULTI FILM]. Select either [MULTI FILM 1], [MULTI FILM 2], or [MULTI FILM 3] with 3/4, and then select the film to be set for each with 2/1. • You can also use the rear dial to set. • [OFF] can be selected only for [MULTI FILM 3].
DMC-G10KPP-VQT2S62_eng.book 84 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [REC] Mode: ±´ Taking Pictures by Specifying the Aperture/ Shutter Speed [ ] Aperture-priority AE Set the aperture value to a higher number when you want a sharp focus background. Set the aperture value to a lower number when you want a soft focus background. Set the mode dial to [ ]. Rotate the rear dial to set the aperture value.
DMC-G10KPP-VQT2S62_eng.book 85 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) • We recommend using a tripod when the shutter speed is slow. • When the flash is activated, the shutter speed cannot be set to faster than 1/160th of a second in Shutter-Priority AE Mode. (P60) • If you press the shutter button fully when the shutter speed is slow, the shutter speed on the screen counts down in Shutter-Priority AE Mode. • [ ] and [ ] cannot be set for Shutter-Priority AE Mode.
DMC-G10KPP-VQT2S62_eng.book 86 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) ∫ About [B] (Bulb) If you set the shutter speed to [B], the shutter stays open while the shutter button is pressed fully (up to about 4 minutes). The shutter closes if you release the shutter button. Use this when you want to keep the shutter open for a long time to take pictures of fireworks, a night scene etc. • If you set the shutter speed to [B], [B] is displayed on the screen.
DMC-G10KPP-VQT2S62_eng.book 87 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [REC] Mode: Confirm the Effects of Aperture and Shutter Speed (Preview Mode) Confirm the effects of aperture You can check the depth of field (effective focus range) before taking a picture by closing the leaf shutter to the aperture value you set. Press [ ] A (preview button). • Preview screen is displayed. It will return to previous screen when [ ] is pressed.
DMC-G10KPP-VQT2S62_eng.book 88 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [REC] Mode: Taking Expressive Portraits and Landscape Pictures (Advanced Scene Mode) You can take high-quality pictures of such subjects as people, scenery, sporting events and activities, flowers and people in night scenes in accordance with the surrounding conditions. Set the mode dial. Press 2/1 to select the Advanced Scene Mode. • You can also use the rear dial to select. Press [MENU/SET] to set.
DMC-G10KPP-VQT2S62_eng.book 89 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [PORTRAIT] The person stands out from the background and has a healthier complexion. [NORMAL PORTRAIT] Shades the background and photographs skin color beautifully. [SOFT SKIN] Makes the skin surface appear especially smooth. • When [SOFT SKIN] is selected, if a part of the background etc. is a color close to skin color, this part is also smoothed.
DMC-G10KPP-VQT2S62_eng.book 90 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [SCENERY] This allows you to take pictures of a wide landscape. [NORMAL SCENERY] The focus adjusts onto far away subjects as a priority. [NATURE] The best setting for photographing natural scenery. [ARCHITECTURE] This setting takes sharp photographs of architecture. The guide lines are displayed. (P56) [CREATIVE SCENERY] The shutter speed (P84) can be changed in the [NORMAL SCENERY] setting.
DMC-G10KPP-VQT2S62_eng.book 91 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [CLOSE-UP] This mode allows you to take close-up pictures of a subject, e.g. when taking pictures of flowers. (The distance from the subject when you take close-up pictures differs depending on the lens you are using.) [FLOWER] Flowers outdoors are recorded with natural colors in macro settings. The guide lines are displayed.
DMC-G10KPP-VQT2S62_eng.book 92 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [NIGHT PORTRAIT] This allows you to take pictures of a person and the background with near real-life brightness. [NIGHT PORTRAIT] Used when taking photographs of people with night scenery as a background. • Open the flash. (You can set to [ ].) • The initial setting for [AF MODE] is [š]. [NIGHT SCENERY] Night scenery is vividly photographed with a slow shutter. • The flash setting is fixed to [Œ].
DMC-G10KPP-VQT2S62_eng.book 93 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [REC] Mode: ¿ Taking Pictures that match the Scene being recorded ( : Scene Mode) When you select a Scene Mode to match the subject and recording situation, the camera sets the optimal exposure and hue to obtain the desired picture. Set the mode dial to [ ]. Press 3/4/2/1 to select the Scene Mode. • You can also use the rear dial to select. Press [MENU/SET] to set.
DMC-G10KPP-VQT2S62_eng.book 94 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) 2 [PARTY] Select this when you want to take pictures at a wedding reception, an indoor party etc. This allows you to take pictures of people and the background with near real-life brightness. ∫ Technique for Party Mode • Open the flash. (You can set to [ ] or [ ].) • We recommend using a tripod and the self-timer for taking pictures. Note • The initial setting for [AF MODE] is [š].
DMC-G10KPP-VQT2S62_eng.book 95 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) í [PET] Select this when you want to take pictures of a pet such as a dog or a cat. You can set your pet’s birthday and name. You can select to have these appear at the time of playback, or have them stamped on the recorded image using [TEXT STAMP] (P136). For information about [AGE] or [NAME], refer to [BABY1]/[BABY2] on P94. Note • The initial setting for the AF Assist Lamp is [OFF].
DMC-G10KPP-VQT2S62_eng.book 96 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [REC] Mode: Taking Pictures while Adjusting Color ( : My Color Mode) You can take pictures with a desired effect by previewing the subject on the LCD monitor or viewfinder (Live View) and setting the desired effect. Set the mode dial to [ ]. Press 2/1 to select an item. • You can also use the rear dial to set. Item Effect [EXPRESSIVE] This is a pop art style image effect that emphasizes the color.
DMC-G10KPP-VQT2S62_eng.book 97 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Note • My Color settings are memorized even if the camera is turned off. • Auto Bracket cannot be used in My Color Mode. • ISO sensitivity will be fixed to [AUTO]. • [I.EXPOSURE], [COLOR SPACE] can be set only when the My Color Mode is set to [CUSTOM]. • The following items cannot be set in My Color Mode because the camera automatically adjusts them to the optimal setting.
DMC-G10KPP-VQT2S62_eng.book 98 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [REC] Mode: Registering Personal Menu Settings (Registering custom settings) It is possible to register up to 3 sets of current camera settings as custom sets. • Set to the mode dial to the desired mode and select the desired menu settings in advance. Select [CUST. SET MEM.] in the [CUSTOM] menu. (P28) Press 3/4 to select the custom set to register and then press [MENU/SET].
DMC-G10KPP-VQT2S62_eng.book 99 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [REC] Mode: Taking Pictures in Custom Mode You can select one of your own custom settings saved with [CUST. SET MEM.] to suit the picture-taking conditions. Initial setting of the Program AE Mode is registered as the custom settings initially. Set the mode dial to [ ]. A Display custom settings Press [MENU/SET] to display the menu. A Press 3/4 to select the custom settings you want to use.
DMC-G10KPP-VQT2S62_eng.book 100 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [REC] Mode: ( only when the mode dial is set to [ ]) Advanced (Recording pictures) Motion Picture Mode The functions available when recording motion pictures differ according to the lens you are using, and the operational sound of the lens may be recorded. Refer to page 16 for details. Set the mode dial to [n].
DMC-G10KPP-VQT2S62_eng.book 101 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Press the shutter button fully to stop recording. • Sound will be heard when pressing the shutter button fully indicating start/stop of motion picture recording. Sound volume can be set in [BEEP] (P31). • If the card becomes full in the middle of recording, the camera stops recording automatically.
DMC-G10KPP-VQT2S62_eng.book 102 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Changing the settings for the recording quality Select [REC QUALITY] from the [MOTION PICTURE] Mode menu, and press 1. (P28) Press 3/4 to select the item and then press [MENU/SET]. Item Picture size fps ([HD]) 1280k720 pixels 30 ¢([WVGA]) 848k480 pixels 30 ([VGA]) 640k480 pixels 30 ([QVGA]) 320k240 pixels 30 Aspect ratio 16:9 4:3 ¢This item cannot be set in the Intelligent Auto Mode.
DMC-G10KPP-VQT2S62_eng.book 103 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) • It is recommended to use a fully charged battery or AC adaptor (P161) when recording motion pictures. • If while recording motion pictures using the AC adaptor (P161) the power supply is cut off due to a power cut or if the AC adaptor is disconnected etc., the motion picture being recorded will not be recorded.
DMC-G10KPP-VQT2S62_eng.book 104 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [REC] Mode: Taking a Picture with Face Recognition Function Face Recognition is a function which finds a face resembling a registered face and prioritizes focus and exposure automatically. Even if the person is located towards the back or on the end of a line in a group photo, the camera can still take a clear picture. [FACE RECOG.] is initially set to [OFF] on the camera. [FACE RECOG.
DMC-G10KPP-VQT2S62_eng.book 105 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Face Settings You can register information such as names and birthdays for face images of up to 6 people. Registration can be facilitated by taking multiple face images of each person.
DMC-G10KPP-VQT2S62_eng.book 106 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Registering face image of new person Select [FACE RECOG.] on the [REC] Mode menu and then press 1. (P28) Press 3/4 to select [MEMORY] and then press [MENU/SET]. Press 3/4/2/1 to select the face recognition frame that is not registered, and then press [MENU/SET]. Take the picture adjusting the face with the guide. • The faces of subjects other than people (pets, etc.) cannot be registered.
DMC-G10KPP-VQT2S62_eng.book 107 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Select item to edit with 3/4, and then press 1. • You can register up to 3 face images. Item [NAME] Description of settings It is possible to register names. 1 Press 4 to select [SET] and then press [MENU/SET]. 2 Enter the name. • For details on how to enter characters, refer to “Entering Text” section on P129. [AGE] [ADD IMAGES] It is possible to register the birthday.
DMC-G10KPP-VQT2S62_eng.book 108 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Change or delete the information for a registered person You can modify the pictures or information of an already registered person. You can also delete the information of the registered person. 1 2 3 4 Select [FACE RECOG.] from the [REC] Mode menu, and then press 1. (P28) Press 4 to select [MEMORY] and press [MENU/SET]. Press 3/4/2/1 to select the face image to edit or delete and then press [MENU/SET].
DMC-G10KPP-VQT2S62_eng.book 109 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Auto Registration When [AUTO REGISTRATION] is set to [ON], the registration screen will display automatically after taking a picture of a face that has a high number of appearances. • Registration screen is displayed after approximately 3 pictures. (It is not counted when Burst Mode, Auto Bracket, White Balance Bracket, Multi Film Bracket or [AUDIO REC.] is set.
DMC-G10KPP-VQT2S62_eng.book 110 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [REC] Mode: Useful Functions at Travel Destinations Recording which Day of the Vacation You Take the Picture For details on the [SETUP] menu settings, refer to P28. If you set the departure date or the travel destination of the vacation in advance, the number of days that have passed since the departure date (which day of the vacation it is) is recorded when you take the picture.
DMC-G10KPP-VQT2S62_eng.book 111 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Press 4 to select [LOCATION] and then press 1. Press 4 to select [SET] and then press [MENU/SET]. Enter the location. • For details on how to enter characters, refer to “Entering Text” on P129. Press [MENU/SET] twice to close the menu. Take a picture. • The number of days that have passed since the departure date is displayed for about 5 seconds if this unit is turned on etc.
DMC-G10KPP-VQT2S62_eng.book 112 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Recording Dates/Times at Overseas Travel Destinations (World Time) For details on the [SETUP] menu settings, refer to P28. You can display the local times at the travel destinations and record them on the pictures you take. • Select [CLOCK SET] to set the current date and time in advance. (P26) Select [WORLD TIME] from the [SETUP] menu, and then press 1.
DMC-G10KPP-VQT2S62_eng.book 113 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Using the [REC] Mode Menu • [METERING MODE], [I.EXPOSURE], [EX. OPT. ZOOM], and [DIGITAL ZOOM] are common to both the [REC] Mode menu and [MOTION PICTURE] Mode menu. Changing these settings in one of these menus is reflected in other menu. [FILM MODE] For details on [REC] Mode menu settings, refer to P28.
DMC-G10KPP-VQT2S62_eng.book 114 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) @ [PICTURE SIZE] For details on [REC] Mode menu settings, refer to P28. Set the number of pixels. The higher the numbers of pixels, the finer the detail of the pictures will appear even when they are printed onto large sheets. Applicable modes: ∫ When the aspect ratio is [X]. (12M) 4000k3000 pixels (6M) 2816k2112 pixels (3M) 2048k1536 pixels ∫ When the aspect ratio is [Y]. (10.
DMC-G10KPP-VQT2S62_eng.book 115 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) A [QUALITY] For details on [REC] Mode menu settings, refer to P28. Set the compression rate at which the pictures are to be stored.
DMC-G10KPP-VQT2S62_eng.book 116 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [STABILIZER] For details on [REC] Mode menu settings, refer to P28. Using one of these modes, jitter during picture taking is detected, and the camera automatically compensates the jitter, enabling jitter-free images to be taken. Applicable modes: [OFF]¢ [MODE1]: Jitter is always compensated during [REC] Mode. [MODE2]: The jitter is compensated for when the shutter button is pressed.
DMC-G10KPP-VQT2S62_eng.book 117 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [RED-EYE REMOVAL] For details on [REC] Mode menu settings, refer to P28. When the flash is used with the Red-Eye Reduction ([ ], [ ], [ will automatically detect and correct the red-eye in the image data. ]) selected, it Applicable modes: [OFF]/[ON] Note • It may not be able to correct the red-eye depending on the recording conditions.
DMC-G10KPP-VQT2S62_eng.book 118 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) C [METERING MODE] For details on [REC] Mode menu settings, refer to P28. Type of optical measurement to measure brightness can be changed. Applicable modes: [C]: Multiple This is the method in which the camera measures the most suitable exposure by judging the allocation of brightness on the whole screen automatically. Usually, we recommend using this method.
DMC-G10KPP-VQT2S62_eng.book 119 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [I.EXPOSURE] (Intelligent exposure adjustment) For details on [REC] Mode menu settings, refer to P28. Contrast and exposure will be adjusted automatically when there is a big difference in brightness between the background and subject, to bring the image close to how you see.
DMC-G10KPP-VQT2S62_eng.book 120 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [LONG SHTR NR] For details on [REC] Mode menu settings, refer to P28. The camera automatically removes noise that appears when the shutter speed becomes slower to take pictures of night scenery etc. so you can take beautiful pictures. Applicable modes: [OFF]/[ON] Note • If you set [ON], the countdown screen is displayed when the shutter button is pressed. Do not move the camera at this time.
DMC-G10KPP-VQT2S62_eng.book 121 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [AUTO BRACKET] For details on [REC] Mode menu settings, refer to P28. You can set the compensation range of the exposure and the bracket order. Applicable modes: [STEP]: [3•1/3]/[3•2/3]/[5•1/3]/[5•2/3]/[7•1/3]/[7•2/3] [SEQUENCE]: [0/j/i]/[j/0/i] Note • Refer to P66 for details. [SELF-TIMER] For details on [REC] Mode menu settings, refer to P28. You can set the time for the self-timer.
DMC-G10KPP-VQT2S62_eng.book 122 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) B [AUDIO REC.] For details on [REC] Mode menu settings, refer to P28. Audio can be recorded simultaneously with the image. You can record the conversation during the shooting or the situation as a memo. Applicable modes: [OFF]: Audio will not be recorded. [ON]: [B] is displayed on the screen. Audio will be recorded as soon as the image is recorded.
DMC-G10KPP-VQT2S62_eng.book 123 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) [CONTINUOUS AF] For details on [MOTION PICTURE] Mode menu settings, refer to P28. You can set the camera to always maintain the focus or fix the focus. Applicable modes: ( only when the mode dial is set to [ ]) [OFF]/[ON] Note • Set to [OFF] when you would like to fix the focus. • It is recommended to set the Auto Focus to [OFF] if the sound of operation bothers you.
DMC-G10KPP-VQT2S62_eng.book 124 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) This allows you to set either to display or not display the histogram. (P56) [HISTOGRAM] [OFF] [ON]: Position of the histogram can be set. Refer to P57 on how to set. This will set the pattern of guide lines displayed when taking a picture. (P56) [GUIDE LINE] [HIGHLIGHT] [OFF]/[ ]/[ [ Position of the guide line can be set. Refer to P56 for how to set.
DMC-G10KPP-VQT2S62_eng.book 125 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) This will set the operation of [AF/AE LOCK] button when taking a picture with fixed focus or exposure. [OFF]: The focus and the exposure are fixed only while you are pressing [AF/AE LOCK]. (P75) If you release [AF/AE LOCK], AF/AE Lock is canceled. [ON]: The focus and the exposure remain fixed even if you release [AF/AE LOCK] after pressing it. If you press [AF/AE LOCK] again, AF/AE Lock is canceled.
DMC-G10KPP-VQT2S62_eng.book 126 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) It will set so no picture can be taken when it is out of focus. [OFF]: This gives priority to the best time to take a picture so you can take a picture when the shutter button is pressed fully. [ON]: You cannot take a picture until the subject is brought into focus. [FOCUS PRIORITY] • If you set [OFF], be careful as the picture may not be properly focused even if [AFS] or [AFC] in Focus Mode is set.
DMC-G10KPP-VQT2S62_eng.book 127 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) In Manual Focus, it is possible to check if the focus position is near side or far side. [MF GUIDE] [OFF] [ON]: MF guide is displayed on the screen when the focus ring is rotated. • Refer to P73 for details. This will set the operation of the [ preview screen. [OFF]: Preview screen is displayed only when the [ ] is pressed. It will return to previous screen when [ ] is released.
DMC-G10KPP-VQT2S62_eng.book 128 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) It is possible to set how the [¦] button to toggle to Intelligent Auto Mode will operate. [¦ BUTTON SWITCH] [SINGLE PRESS]: It will switch to Intelligent Auto Mode by pressing [¦]. [PRESS AND HOLD]: It will switch to Intelligent Auto Mode by pressing [¦] for a while. [DIAL GUIDE] Sets if the operation switch guide when the mode dial is switched to , , and is to be displayed or not.
DMC-G10KPP-VQT2S62_eng.book 129 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Recording pictures) Entering Text It is possible to enter babies’ and pets’ names and the names of travel destinations when recording. (Only alphabetical characters and symbols can be entered.) Display the entry screen and press 4 to move to the character selection section. • You can display the entry screen via the following operations. – [NAME] of [BABY1]/[BABY2] or [PET] (P94) in Scene Mode. – [NAME] in [FACE RECOG.
DMC-G10KPP-VQT2S62_eng.book 130 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Playback) Advanced (Playback) Playing Back Motion Pictures/Pictures with Audio • The file format that can be played back with this camera is QuickTime Motion JPEG. Press [(]. Motion pictures Press 2/1 to select a picture with a motion picture icon ([ ]), and then press 3 to play back.
DMC-G10KPP-VQT2S62_eng.book 131 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Playback) Pictures with audio Press 2/1 to select a picture with the audio icon [ and then press 3 to play back. ] A A Audio icon • Refer to [AUDIO REC.] (P122) for information about how to create still pictures with audio. Note • Sound can be heard through the speaker. Refer to [VOLUME] (P31) for information about how to adjust the volume in the [SETUP] menu.
DMC-G10KPP-VQT2S62_eng.book 132 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Playback) Press 3 to select [START] and then press [MENU/SET]. Press 4 to finish the slide show. • Normal Playback resumes after the slide show finishes. ∫ Operations performed during slide show The cursor displayed during playback is the same as 3/4/2/1. • The menu screen is restored when [‚] is pressed.
DMC-G10KPP-VQT2S62_eng.book 133 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Playback) [PLAYBACK MODE] Playback in [NORMAL PLAY], [PICTURE PLAY], [VIDEO PLAY], [CATEGORY PLAY] or [FAVORITE PLAY] can be selected. Select [PLAYBACK MODE] on the [PLAYBACK] Mode menu. (P28) Press 3/4 to select the item and then press [MENU/SET]. • [FAVORITE PLAY] can be selected only when [FAVORITE] on the [PLAYBACK] menu (P134) is at [ON] and there are pictures already set as favorites.
DMC-G10KPP-VQT2S62_eng.book 134 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Playback) Ü [FAVORITE] You can do the following if a mark has been added to pictures and they have been set as favorites. • Play back the pictures set as favorites only as a slide show. • Play back only the pictures set as favorites. ([FAVORITE PLAY]) • Delete all the pictures not set as favorites. ([ALL DELETE EXCEPTÜ]) Select [FAVORITE] on the [PLAYBACK] Mode menu. (P28) Press 4 to select [ON] and then press [MENU/SET].
DMC-G10KPP-VQT2S62_eng.book 135 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Playback) [TITLE EDIT] You can add text (comments) to pictures. After text has been registered, it can be included in prints using [TEXT STAMP] (P136). (Only alphabetic characters and symbols can be entered.) Select [TITLE EDIT] on the [PLAYBACK] Mode menu. (P28) Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. Select the picture, and then press [MENU/SET] to set.
DMC-G10KPP-VQT2S62_eng.book 136 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Playback) [TEXT STAMP] You can stamp the recording date/time, name, location, travel date or title onto the recorded pictures. It is suitable for regular size printing. (Pictures with a picture size larger than [S] will be resized when stamping the date etc. on them.) Select [TEXT STAMP] on the [PLAYBACK] Mode menu. (P28) Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
DMC-G10KPP-VQT2S62_eng.book 137 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Playback) Press 3/4 to select the settings, and then press [MENU/SET]. Item Setting item [OFF] [SHOOTING DATE] [W/OTIME]: Stamp the year, month and date. [WITHTIME]: Stamp the year, month, day, hour and minutes. [OFF] [ ]: Name registered in Face Recognition will be stamped. [NAME] [ ]: Stamps names on pictures that already have been registered name settings of [BABY1]/ [BABY2] or [PET] in Scene Mode.
DMC-G10KPP-VQT2S62_eng.book 138 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Playback) Note • When you print pictures stamped with text, the date will be printed over the stamped text if you specify printing of the date at the photo shop or on the printer. • You can set up to 50 pictures at one time in [MULTI]. • The picture quality may deteriorate when text stamping is carried out. • Depending on the printer being used, some characters may be cut at printing. Check before printing.
DMC-G10KPP-VQT2S62_eng.book 139 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Playback) Q [RESIZE] Reducing the picture size (number of pixels) To allow easy posting to web pages, attachment to e-mail etc., picture size (number of pixels) is reduced. Select [RESIZE] on the [PLAYBACK] Mode menu. (P28) Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. Select the picture and size. 1 2 [SINGLE] setting Press 2/1 to select the picture, and then press [MENU/SET].
DMC-G10KPP-VQT2S62_eng.book 140 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Playback) [CROPPING] You can enlarge and then clip the important part of the recorded picture. Select [CROPPING] on the [PLAYBACK] Mode menu. (P28) Press 2/1 to select the picture, and then press [MENU/SET]. Use the rear dial and press 3/4/2/1 to select the parts to be cropped. Reduction Rear dial (right): Enlargement Rear dial (left): Reduction 3/4/2/1: Move Enlargement () Move the position () Press [MENU/SET].
DMC-G10KPP-VQT2S62_eng.book 141 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Playback) ? [ASPECT CONV.] You can convert pictures taken with a [W] aspect ratio to a [Y], a [X] or a [ ratio. ] aspect Select [ASPECT CONV.] on the [PLAYBACK] Mode menu. (P28) Press 3/4 to select [Y], [X] or [ press [MENU/SET]. ] and then Press 2/1 to select a picture taken with [W] aspect ratio, and then press [MENU/SET]. Press 2/1 to determine the horizontal position, and press [MENU/SET] to set.
DMC-G10KPP-VQT2S62_eng.book 142 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Playback) N [ROTATE]/M [ROTATE DISP.] This mode allows you to automatically display pictures vertically if they were recorded holding the camera vertically or rotate pictures manually in 90o steps. Rotate (The picture is rotated manually) Select [ROTATE] on the [PLAYBACK] Mode menu. (P28) • The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF]. Press 2/1 to select the picture and then press [MENU/SET].
DMC-G10KPP-VQT2S62_eng.book 143 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Playback) [PRINT SET] DPOF “Digital Print Order Format” is a system that allows the user to select which pictures to print, how many copies of each picture to print and whether or not to print the recording date on the pictures when using a DPOF compatible photo printer or photo printing store. For details, ask at your photo printing store. For more information visit: http://panasonic.jp/dc/dpof_110/white_e.
DMC-G10KPP-VQT2S62_eng.book 144 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Playback) Note • The number of prints can be set from 0 to 999. • With a printer supporting PictBridge, the date print settings of the printer may take precedence so check if this is the case. • It may not be possible to use the print settings with other equipment. In this case, cancel all the settings, and reset the settings. • If the file is not based on the DCF standard, the print setting cannot be set.
DMC-G10KPP-VQT2S62_eng.book 145 ページ ２０１０年４月２３日 金曜日 午後８時０分 Advanced (Playback) [FACE REC EDIT] You can clear and replace all information relating to face recognition in selected images. Select [FACE REC EDIT] on the [PLAYBACK] Mode menu. (P28) Press 3/4 to select [REPLACE] or [DELETE] and then press [MENU/SET]. Press 2/1 to select the picture and then press [MENU/SET]. • You cannot select pictures for which Face Recognition information has not been registered.
DMC-G10KPP-VQT2S62_eng.book 146 ページ ２０１０年４月２３日 金曜日 午後８時０分 Connecting to other equipment Connecting to other equipment Playing Back Pictures on a TV Screen Playing back pictures using the AV cable (supplied) Preparations: Set the [TV ASPECT]. (P33) Turn this unit and the TV off. 1 Yellow: to the video input socket 2 White: to the audio input socket A Align the marks, and insert. B AV cable (supplied) • Check the directions of the connectors, and plug them straight in or unplug them straight out.
DMC-G10KPP-VQT2S62_eng.book 147 ページ ２０１０年４月２３日 金曜日 午後８時０分 Connecting to other equipment Playing back pictures on a TV with an SD Memory Card slot The recorded still pictures can be played back on a TV with an SD Memory Card slot. Note • Depending on the TV model, pictures may not be displayed on the full screen. • Motion pictures cannot be played back. To play back motion pictures, connect the camera to the TV with the AV cable (supplied).
DMC-G10KPP-VQT2S62_eng.book 148 ページ ２０１０年４月２３日 金曜日 午後８時０分 Connecting to other equipment Connect the HDMI mini cable to the [HDMI] socket on the camera. Turn the TV on and switch to HDMI input. Turn the camera on and then press [(]. • When [VIERA Link] (P34) is set to [ON] and the camera is connected to a TV supporting VIERA Link, input of the TV will be switched automatically and playback screen will be displayed (P149).
DMC-G10KPP-VQT2S62_eng.book 149 ページ ２０１０年４月２３日 金曜日 午後８時０分 Connecting to other equipment Playback using VIERA Link (HDMI) (HDAVI Control™) What is the VIERA Link? • VIERA Link™ is a new name for EZ Sync™. • This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using a HDMI mini cable (optional) for automatic linked operations. (Not all operations are possible.
DMC-G10KPP-VQT2S62_eng.book 150 ページ ２０１０年４月２３日 金曜日 午後８時０分 Connecting to other equipment ∫ Usable functions Operate with the remote control for the TV. Multi Playback This is displayed initially when using the VIERA Link. 3/4/2/1: Select the image. [OK]: Go to one screen display. Red button: Switch the types of data to play back. [SUB MENU]: Display the Playback Mode selection screen. • The type of data for playback changes in the order of [ALL] > [ ] > [ ] > [ALL].
DMC-G10KPP-VQT2S62_eng.book 151 ページ ２０１０年４月２３日 金曜日 午後８時０分 Connecting to other equipment ∫ Other linked operations Turning the power off: If you use the remote control for the TV to turn off the power, the power on this unit also turns off. (When connecting the unit to a PC with a USB cable, the power will not turn off.
DMC-G10KPP-VQT2S62_eng.book 152 ページ ２０１０年４月２３日 金曜日 午後８時０分 Connecting to other equipment Connecting to a PC You can acquire recorded pictures to a PC by connecting the camera and the PC. • Some PCs can read directly from the card removed from the camera. For details, refer to the operating instructions of your PC. • If the computer being used does not support SDXC Memory Cards, a message prompting you to format may appear. (Doing so will cause recorded images to be erased so do not choose to format.
DMC-G10KPP-VQT2S62_eng.book 153 ページ ２０１０年４月２３日 金曜日 午後８時０分 Connecting to other equipment • If [USB MODE] (P33) is set to [PC] in the [SETUP] menu in advance, the camera will be automatically connected to the PC without displaying the [USB MODE] selection screen. Since there is no need to set this each time you connect to the PC, it is convenient. • When the camera has been connected to the PC with [USB MODE] set to [PictBridge(PTP)], a message may appear on the PC’s screen.
DMC-G10KPP-VQT2S62_eng.book 154 ページ ２０１０年４月２３日 金曜日 午後８時０分 Connecting to other equipment ∫ Connection in the PTP Mode (WindowsR XP, Windows VistaR, WindowsR 7 and Mac OS X only) Set [USB MODE] to [PictBridge(PTP)]. Data can now be read only from the card into the PC. • When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP mode.
DMC-G10KPP-VQT2S62_eng.book 155 ページ ２０１０年４月２３日 金曜日 午後８時０分 Connecting to other equipment Note • Do not use any other USB connection cables except the supplied one. Use of cables other than the supplied USB connection cable may cause malfunction. • Turn the camera off before connecting or disconnecting the AC adaptor (P161). • Before inserting or removing a card, turn the camera off, and disconnect the USB connection cable.
DMC-G10KPP-VQT2S62_eng.book 156 ページ ２０１０年４月２３日 金曜日 午後８時０分 Connecting to other equipment Press 3 to select [PRINT START] and then press [MENU/SET]. • Refer to P156 for the items which can be set before starting to print the pictures. • Press [MENU/SET] to cancel printing. • Disconnect the USB connection cable after printing. MULTI SELECT PRINT START PRINT WITH DATE NUM.
DMC-G10KPP-VQT2S62_eng.book 157 ページ ２０１０年４月２３日 金曜日 午後８時０分 Connecting to other equipment [PAPER SIZE] Item Description of settings { Settings on the printer are prioritized. [L/3.5qk5q] 89 mmk127 mm [2L/5qk7q] 127 mmk178 mm [POSTCARD] 100 mmk148 mm [16:9] 101.6 mmk180.6 mm [A4] 210 mmk297 mm [A3] 297 mmk420 mm [10k15cm] 100 mmk150 mm [4qk6q] 101.6 mmk152.4 mm [8qk10q] 203.2 mmk254 mm [LETTER] 216 mmk279.4 mm [CARD SIZE] 54 mmk85.
DMC-G10KPP-VQT2S62_eng.book 158 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Others Using an External Flash (optional) After attaching the external flash, the effective range will be increased when compared to the camera’s built in flash. Preparations: • Turn off the camera and close the built-in flash. ∫ Using the dedicated flash (DMW-FL220; optional) Attach the dedicated flash to the hot shoe A and then turn on the camera and the dedicated flash.
DMC-G10KPP-VQT2S62_eng.book 159 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others • When attaching the external flash, the built-in flash cannot be activated. • Do not open the built-in flash when an external flash is attached. • The camera will become unstable when attaching the external flash, it is recommended to use a tripod when taking picture. • Turn off the camera when removing the external flash. • Detach the external flash when carrying the camera.
DMC-G10KPP-VQT2S62_eng.book 160 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Using the Remote Shutter (optional) If you use the remote shutter (DMW-RSL1; optional), you can avoid jitter (camera shake) when using a tripod and you can keep the shutter pressed fully when taking pictures with [B] (Bulb) or Burst Mode. The remote shutter works similar to the shutter button on the camera. Firmly connect the remote shutter to the [REMOTE] socket on the camera as far as it will go. REMOTE Take a picture.
DMC-G10KPP-VQT2S62_eng.book 161 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Using the AC Adaptor You can use the camera without worrying about battery discharge when it is connected to a PC or a printer if you use the DC cable (DMW-DCC3; optional) to connect the camera to the battery charger/AC adaptor and connect the AC cable. • Check that the camera is turned off. • Close the flash. Connect the AC cable. Connect the DC cable A.
DMC-G10KPP-VQT2S62_eng.book 162 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others LCD Monitor Display/Viewfinder Display • The following images are examples of when the display screen is set to [ monitor style) in the LCD monitor.
DMC-G10KPP-VQT2S62_eng.
DMC-G10KPP-VQT2S62_eng.book 164 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others ∫ In playback 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Playback Mode (P49) Film Mode (P81) 1 2 3 4 5 6 7 8 9 Protected picture (P144) Number of prints (P143) 1 STD Picture size (P114) 20 1/9 10 : Recording Quality (P102) 19 3s 11 Quality (P115) 18 12s 12 Intelligent Exposure (P119) 17 Intelligent Resolution (P118) 16 Battery indication (P22) 15 Picture number/Total pictures 0 100 P F3.
DMC-G10KPP-VQT2S62_eng.book 165 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Cautions for Use Optimal use of the camera Take care not to drop or knock the unit or put a lot of pressure on it. • Take care not to knock or drop the bag/case that you inserted the camera in as the shock may cause damage to the camera, lens or LCD monitor. • Do not use a paper bag as it can easily rip causing the camera to fall and be damaged.
DMC-G10KPP-VQT2S62_eng.book 166 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others ∫ About dirt on the image sensor This camera features an interchangeable lens system so dirt may get inside the camera body when changing lenses. Depending on the recording conditions, dirt on the image sensor may appear on the recorded picture. Do not change lenses where there is a lot of dust, and always attach the body cap when a lens is not attached to the camera, so that dirt or dust does not get inside the camera body.
DMC-G10KPP-VQT2S62_eng.book 167 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others About the Lens • Do not press the lens with excessive force. • Do not leave the camera with the lens facing the sun as rays of light from the sun may cause it to malfunction. Also, be careful when placing the camera outside or near a window. • When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the picture may be affected.
DMC-G10KPP-VQT2S62_eng.book 168 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Card Do not leave the card where the temperature is high, where electromagnetic waves or static electricity are easily generated or exposed to direct sunlight. Do not bend or drop the card. • The card may be damaged or the recorded content may be damaged or deleted. • Put the card in the card case or the storage bag after use and when storing or carrying the card.
DMC-G10KPP-VQT2S62_eng.book 169 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others About the picture data • Recorded data may be damaged or lost if the camera breaks down due to inappropriate handling. Panasonic will not be liable for any damage suffered due to loss of recorded data. About tripods or unipods • When you use a tripod, make sure the tripod is stable when this unit is attached to it. • You may not be able to remove the card or the battery when using a tripod or unipod.
DMC-G10KPP-VQT2S62_eng.book 170 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others [NO ADDITIONAL SELECTIONS CAN BE MADE] • The number of pictures, which can be set at one time when [MULTI] has been selected for [DELETE MULTI] (P53), [FAVORITE] (P134), [TITLE EDIT] (P135), [TEXT STAMP] (P136) or [RESIZE] (P139) has been exceeded. > Reduce the number of pictures set, and then repeat the operation. • More than 999 favorites have been set.
DMC-G10KPP-VQT2S62_eng.book 171 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others [THIS CARD IS NOT FORMATTED WITH THIS CAMERA, AND NOT SUITABLE FOR MOVIE RECORDING.] • The writing speed is lower if the card has been formatted using a PC or other equipment. As a consequence, motion picture recording may stop in the middle. If this happens, make a backup of the data and format (P35) the card in this unit.
DMC-G10KPP-VQT2S62_eng.book 172 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Troubleshooting First, try out the following procedures (P172–180). If the problem is not resolved, it may be improved by selecting [RESET] (P35) on the [SETUP] menu. Battery and power source The camera cannot be operated even when it is turned on. • The battery is not inserted correctly. (P24) • The battery is exhausted. • Charge the battery. • AC adaptor is not connected properly.
DMC-G10KPP-VQT2S62_eng.book 173 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Recording Taking pictures is not possible. The shutter will not operate immediately when the shutter button is pressed. • Is the subject focused? > [FOCUS PRIORITY] is set to [ON] at the time of purchase, and so you cannot take pictures until the subject is in focus. If you want to be able to take a picture when you press the shutter button fully even if the subject is not focused, set [FOCUS PRIORITY] in the [CUSTOM] menu to [OFF].
DMC-G10KPP-VQT2S62_eng.book 174 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others The recorded picture looks rough. Noise appears on the picture. • Is the ISO sensitivity high or the shutter speed slow? (ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures indoors etc. noise will appear.) > Decrease the ISO sensitivity. (P79) > Increase the setting for [NOISE REDUCTION] in [FILM MODE] or lower the setting for each of the items other than [NOISE REDUCTION].
DMC-G10KPP-VQT2S62_eng.book 175 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Motion pictures Motion picture recording stops in the middle. • Use a card with SD Speed Class¢ with “Class 6” or higher when recording motion pictures. ¢ SD speed class is the speed standard regarding continuous writing. • Depending on the type of the card, recording may stop in the middle.
DMC-G10KPP-VQT2S62_eng.book 176 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Flash The flash is not activated. • Is the flash closed? > Slide the [ OPEN] lever to open the flash. (P57) The flash is activated 2 times. • The flash is activated 2 times. The interval between the first and second flash is longer when Red-eye Reduction (P59) is set so the subject should not move until the second flash is activated. LCD monitor/Viewfinder The LCD monitor turns off although the camera is turned on.
DMC-G10KPP-VQT2S62_eng.book 177 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others You see red, green, or blue flashes when you move your eyes in the viewfinder, or when the camera is moved rapidly. • This is a characteristic of the drive system of the viewfinder of this unit, and it is not a malfunction. There will be no problem with the recorded image. Playback The picture being played back is not rotated, or is rotated in an unexpected direction, when displayed.
DMC-G10KPP-VQT2S62_eng.book 178 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others [THUMBNAIL IS DISPLAYED] appears on the screen. • Is it a picture that has been recorded with other equipment? In such cases, these pictures may be displayed with a deteriorated picture quality. Red part of the recorded image has changed color to black.
DMC-G10KPP-VQT2S62_eng.book 179 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others The picture cannot be transferred when the camera is connected to a PC. • Is the camera connected to the PC correctly? • Is the camera recognized by the PC correctly? > Set to [PC] in [USB MODE]. (P33, 152) The card is not recognized by the PC. > Disconnect the USB connection cable. Connect it again while the card is inserted in the camera. The card is not recognized by the PC.
DMC-G10KPP-VQT2S62_eng.book 180 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others The AF Assist Lamp does not turn on. • Is [AF ASSIST LAMP] on the [CUSTOM] menu set to [ON]? (P126) • The AF Assist Lamp does not turn on in bright places. The camera becomes warm. • The surface of the camera may become warm during use. This does not affect the performance or quality of the camera. The clock is reset. • If you do not use the camera for a long time, the clock may be reset.
DMC-G10KPP-VQT2S62_eng.book 181 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Others Number of Recordable Pictures and Available Recording Time • The number of recordable pictures and the available recording time are an approximation. (These vary depending on the recording conditions and the type of card.) • The number of recordable pictures and the available recording time varies depending on the subjects. ∫ Number of recordable pictures • [9999i] is displayed if there are more than 10000 pictures remaining.
DMC-G10KPP-VQT2S62_eng.book 182 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Aspect ratio X Quality Card 256 MB 512 MB 1 GB 2 GB 4 GB 6 GB 8 GB 12 GB 16 GB 24 GB 32 GB 48 GB 64 GB Y (3M) Picture size (10.
DMC-G10KPP-VQT2S62_eng.
DMC-G10KPP-VQT2S62_eng.book 184 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Aspect ratio (4.
DMC-G10KPP-VQT2S62_eng.
DMC-G10KPP-VQT2S62_eng.book 186 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Specifications Digital Camera Body (DMC-G10): Information for your safety Power Source: DC 9.3 V Power Consumption: 2.5 W (When recording with LCD Monitor) (When the 14– 42 mm/F3.5 –5.6 lens included in DMC-G10K is used) 1.5 W (When playing back with LCD Monitor) (When the 14– 42 mm/F3.5 –5.
DMC-G10KPP-VQT2S62_eng.book 187 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others LCD monitor: Viewfinder: Flash: Flash synchronization speed: Microphone: Speaker: Recording media: Picture size Still picture: Motion pictures: Quality: Recording file format Still Picture: Pictures with audio: Motion pictures: Interface Digital: Analog video/audio: 3.0q TFT LCD (Approx. 460,000 dots) (field of view ratio about 100%) Color LCD Viewfinder (Approx.
DMC-G10KPP-VQT2S62_eng.book 188 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Terminal [REMOTE]: [AV OUT/DIGITAL]: [HDMI]: [DC IN]: Dimensions: φ 2.5 mm jack Dedicated jack (8 pin) MiniHDMI TypeC None (when using an AC adaptor, use optional DC cable) Approx. 124 mm (W)k83.6 mm (H)k74.0 mm (D) [4.88q (W)k3.29q(H)k2.91q (D)] (excluding the projecting parts) Mass (weight): Approx. 558 g/1.23 lb (with the 14 – 42 mm/F3.5 – 5.6 lens included in DMC-G10K, card and battery) Approx. 336 g/0.
DMC-G10KPP-VQT2S62_eng.book 189 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Interchangeable Lens (H-FS014042) “LUMIX G VARIO 14– 42 mm/F3.5 – 5.6 ASPH./MEGA O.I.S.” Focal length: f=14 mm to 42 mm (35 mm film camera equivalent: 28 mm to 84 mm) Aperture type: 7 leaf shutters/iris diaphragm/circular diaphragm Aperture range: F3.5 (Wide) to F5.6 (Tele) Minimum aperture value: F22 Lens construction: 12 elements in 9 groups (1 non-spherical lenses) In focus distance: 0.3 m (0.
DMC-G10KPP-VQT2S62_eng.
DMC-G10KPP-VQT2S62_eng.
DMC-G10KPP-VQT2S62_eng.book 192 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Digital Camera Accessory Order Form (For USA and Puerto Rico Customers) Please photocopy this form when placing an order. 1. Digital Camera Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling 6.95 Total Enclosed 3. Method of payment (check one) Check of Money Order enclosed (NO C.O.D.
DMC-G10KPP-VQT2S62_eng.book 193 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Limited Warranty (ONLY FOR U.S.A.
DMC-G10KPP-VQT2S62_eng.book 194 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Mail-In Service For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship the product prepaid to: Panasonic Exchange Center 4900 George McVay Drive Suite B McAllen, TX 78503 panacare@us.panasonic.com When shipping the unit, carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton.
DMC-G10KPP-VQT2S62_eng.book 195 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/help or, contact us via the web at: http://www.panasonic.
DMC-G10KPP-VQT2S62_eng.book 196 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Index Others A AC Adaptor ......................... 152, 154, 161 Access Indication ................................... 25 Advanced Scene Mode ......................... 88 AF Assist Lamp ................................... 126 AF Mode ................................................ 69 AF Tracking ..................................... 41, 71 AF/AE Lock ............................................ 75 AF/AE Lock Hold ......................
DMC-G10KPP-VQT2S62_eng.book 197 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others G Guide Line ......................................56, 124 H HDMI mini Cable .................................. 147 HDMI Mode ............................................ 34 Highlight Display .................................. 124 Histogram ....................................... 56, 124 Hot shoe ............................................... 158 I I.Resolution .......................................... 118 IA Button Switch ...........
DMC-G10KPP-VQT2S62_eng.book 198 ページ ２０１０年４月２３日 金曜日 午後８時０分 Others Q U Quality ......................................... 115, 181 Quick AF .............................................. 125 Quick Menu ........................................... 30 Unipods ............................................... 169 USB Connection Cable ................ 152, 154 USB Mode ............................................. 33 R V RAW .................................................... 115 RAWiFine ................
DMC-G10KPP-VQT2S62_eng.
DMC-G10KPP-VQT2S62_eng.book 200 ページ ２０１０年４月２３日 金曜日 午後８時０分 • G MICRO SYSTEM is a lens exchange type digital camera system of LUMIX based on a Micro Four Thirds System standard. • Micro Four Thirds™ and Micro Four Thirds Logo marks are trademarks or registered trademarks of Olympus Imaging Corporation, in Japan, the United States, the European Union and other countries.
