User guide
Table Of Contents
- CONTENTS
- Information for Your Safety
- The camera has wireless LAN (Wi-FiR), so sharing still pictures and motion pictures is easy
- Care of the camera
- Standard Accessories
- Names and Functions of Main Parts
- How to Use the Touch Panel
- Charging the Battery
- Charging
- Approximate operating time and number of recordable pictures
- About the Built-in Memory/the Card
- Inserting and Removing the Card (optional)/the Battery
- Setting Date/Time (Clock Set)
- Changing the Clock Setting
- Selecting the [Rec] Mode
- Taking Pictures Using the Automatic Function (Intelligent Auto Mode)
- Recording Motion Pictures
- Playing Back Pictures ([Normal Play])
- Deleting Pictures
- Setting the Menu
- About the supplied software
- Installing supplied software
- Message Display
- Troubleshooting
- Reading the Owner’s Manual (PDF format)
- Specifications
- Digital Camera Accessory System
- Digital Camera Accessory Order Form
- Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)
29
(ENG) VQT3S29
Troubleshooting
First, try out the following procedures.
• Check “Troubleshooting” in the “Owner’s Manual for advanced features (PDF
format)”.
• The battery is exhausted. Charge the battery.
• If you leave the camera on, the battery will be exhausted.
> Turn the camera off frequently by using the [Economy] etc.
• Insert the battery securely all the way in.
• Is the mode set to [Rec] Mode?
• Is there any memory remaining on the built-in memory or the card?
> Delete the pictures which are not necessary to increase the available
memory.
• You may not be able to record for a short while after turning the power [ON]
when using a large capacity card.
[Failed to connect wireless access point]/[Connection failed]/
[No destination found]
• Check following regarding the wireless access point (broadband router).
> The wireless access point (broadband router) information set on this unit is
wrong. Check the authentication type, encryption type, and encryption key.
> Power of the wireless access point (broadband router) is not turned on.
> Setting of the wireless access point (broadband router) is not supported by
this unit.
• Check the network setting of the destination.
If the problem is not resolved, it may be improved by selecting [Reset] on the
[Setup] menu when taking pictures.
Battery and power source
The camera cannot be operated even when it is turned on.
The camera turns off immediately after it is turned on.
Card/battery door does not close.
Recording
The picture cannot be recorded.
DMC-FX90P-VQT3S29_eng.book 29 ページ ２０１１年８月２２日 月曜日 午後３時５８分