User guide
Table Of Contents
- CONTENTS
- Information for Your Safety
- The camera has wireless LAN (Wi-FiR), so sharing still pictures and motion pictures is easy
- Care of the camera
- Standard Accessories
- Names and Functions of Main Parts
- How to Use the Touch Panel
- Charging the Battery
- Charging
- Approximate operating time and number of recordable pictures
- About the Built-in Memory/the Card
- Inserting and Removing the Card (optional)/the Battery
- Setting Date/Time (Clock Set)
- Changing the Clock Setting
- Selecting the [Rec] Mode
- Taking Pictures Using the Automatic Function (Intelligent Auto Mode)
- Recording Motion Pictures
- Playing Back Pictures ([Normal Play])
- Deleting Pictures
- Setting the Menu
- About the supplied software
- Installing supplied software
- Message Display
- Troubleshooting
- Reading the Owner’s Manual (PDF format)
- Specifications
- Digital Camera Accessory System
- Digital Camera Accessory Order Form
- Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)
VQT3S29 (ENG)
28
Message Display
Confirmation messages or error messages will be displayed on the screen in
some cases.
The major messages are described below as examples.
[Some pictures cannot be deleted]/[This picture cannot be deleted]
• Pictures not based on the DCF standard cannot be deleted.
> If you want to delete some pictures, format the card after saving necessary
data on a PC etc.
[Not enough space on built-in memory]/[Not enough memory on the card]
• There is no space left on the built-in memory or the card.
• When you copy pictures from the built-in memory to the card (batch copy), the
pictures are copied until the capacity of the card becomes full.
[Memory card error.
This card cannot be used in this camera.
Format this card?]
• It is a format that cannot be used with this unit.
> Insert a different card.
> Format the card again with the camera after saving necessary data on a PC
etc. Data will be deleted.
[Please turn camera off and then on again]/[System Error]
• This message appears when the camera is not operating properly.
> Turn the camera off and on. If the message persists, contact the dealer or
your nearest Service Center.
[Insert SD card again]/[Try another card]
•
An error has occurred accessing the card.
> Insert the card again.
> Insert a different card.
[This battery cannot be used]
• Use a genuine Panasonic battery. If this message is displayed even when a
genuine Panasonic battery is used, contact the dealer or your nearest Service
Center.
• If the battery terminal is dirty, clean it and remove any objects.
DMC-FX90P-VQT3S29_eng.book 28 ページ ２０１１年８月２２日 月曜日 午後３時５８分