Operating Instructions

- 85 -

Advanced (Recording pictures)

∫ About focusing

When [CONTINUOUS AF] (P120) is set to [ON], and you focus on a subject, the camera

will maintain focus on that subject. To fix the focus position when beginning to record a

motion picture, set to [OFF].

Start recording by pressing the motion

picture button.

A Available recording time

B Elapsed recording time

•

Release the motion picture button right after you press it.

• The audio is also recorded simultaneously from the

built-in microphone on this unit. (Motion pictures

cannot be recorded without audio.)

• The recording state indicator (red) C will flash while

recording motion pictures.

• The screen will become dark momentarily, and

recording will start after adjusting the display.

Stop the recording by pressing the motion picture button again.

• Sound will go off when pressing the motion picture button indicating start/stop of motion

picture recording.

Sound volume can be set in [BEEP LEVEL] (P26).

• If the built-in memory or the card becomes full in the middle of recording, the camera

stops recording automatically.