Digital Camera User Manual
Table Of Contents
- TABLE OF CONTENTS
- Before Use
- Preparation
- Standard Accessories
- Names of the Components
- Quick Guide
- Charging the Battery with the Charger
- About the Battery (charging/number of recordable pictures)
- Inserting and Removing the Card (optional)/the Battery
- About the Built-in Memory/the Card (optional)
- Setting Date/Time (Clock Set)
- About the Mode Dial
- Setting the Menu
- About the Setup Menu
- LCD Monitor Display/Switching the LCD Monitor Display
- Basic
- Advanced (Recording pictures)
- About the LCD Monitor
- Taking Pictures using the Built-in Flash
- Taking Pictures with the Self-timer
- Compensating the Exposure
- Taking Pictures using Auto Bracket
- Taking Close-up Pictures
- Taking pictures that match the scene being recorded (Scene mode)
- Motion Picture Mode
- Recording which Day of the Vacation You Take the Picture
- Displaying the Time at the Travel Destination (World Time)
- Using the [REC] Mode Menu
- Taking and viewing clipboard pictures (Clipboard mode)
- Advanced (Playback)
- Connecting to other equipment
- Others
- Screen Display
- Cautions for Use
- Message Display
- Troubleshooting
- Number of Recordable Pictures and Available Recording Time
- Specifications
- Digital Camera Accessory System
- Digital Camera Accessory Order Form (For USA Customers)
- Request for Service Notice (For USA Only)
- Limited Warranty (For USA Only)
- Customer Services Directory (For USA Only)
- Précautions à prendre (pour le Canada)
Advanced (Recording pictures)
63
VQT1J82
Press [ ] to display the [REC] mode
menu and select the item to set. (P55)
∫ About the jitter/movement detection
demonstration screen
Press [DISPLAY] to display [JITTER,
SUBJ. MOVE DEMO] when the
[STABILIZER] screen is displayed.
(Pictures cannot be recorded when the
[JITTER, SUBJ. MOVE DEMO] screen
appears.)
Press [DISPLAY] again to finish this mode.
A Jitter detection demonstration
B Movement detection demonstration
• It is also possible to display this screen
using the quick setting (P56).
• The camera automatically detects the
jitter and the movement of the subject and
displays these on the indicator.
• We recommend using a bright subject
with high contrast for the subject
movement demonstration.
• The jitter/movement detection
demonstration screen is an
approximation.
• The camera uses movement detection
when automatically setting the ISO
sensitivity in the following cases.
– In intelligent auto mode [ ]
– In [SPORTS], [BABY1]/[BABY2] and
[PET] in scene mode
– When [INTELLIGENT ISO] is set
• The stabilizer function may not be
effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– In digital zoom range.
– When taking pictures while following a
moving subject.
– When the shutter speed becomes
slower to take pictures indoors or in dark
places.
Be careful of camera jitter when you press
the shutter button.
• The setting is fixed to [MODE2] with
[SELF PORTRAIT] in scene mode and to
[OFF] in [STARRY SKY] in scene mode.
• You cannot be set to [OFF] in the
intelligent auto mode [ ].
• In motion picture mode [ ], [MODE2]
cannot be set.
Press [ ] to display the [REC] mode
menu and select the item to set. (P55)
∫ Number of pictures recorded in burst
mode
¢ The burst speed is constant regardless
of the transfer speed of the card.
[STABILIZER]
Detecting jitter and compensating
for it
[MODE1]
()
The stabilizer operates
continuously and can assist
during photo composition.
[MODE2]
()
The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
[OFF]
()
When the stabilizer is not
desired.
/SET
MENU
A
B
[BURST]
Taking Pictures using Burst
Burst speed
(pictures/
second)
Number of recordable pic-
tures (pictures)
3¢ max. 4 max. 7
approx. 2
Depends on the
remaining capacity of the
built-in memory/card.
/SET
MENU
DMC-FX33_ENG.book 63 ページ ２００７年７月９日 月曜日 午後１２時５８分