Digital Camera User Manual
Table Of Contents
- TABLE OF CONTENTS
- Before Use
- Preparation
- Standard Accessories
- Names of the Components
- Quick Guide
- Charging the Battery with the Charger
- About the Battery (charging/number of recordable pictures)
- Inserting and Removing the Card (optional)/the Battery
- About the Built-in Memory/the Card (optional)
- Setting Date/Time (Clock Set)
- About the Mode Dial
- Setting the Menu
- About the Setup Menu
- LCD Monitor Display/Switching the LCD Monitor Display
- Basic
- Advanced (Recording pictures)
- About the LCD Monitor
- Taking Pictures using the Built-in Flash
- Taking Pictures with the Self-timer
- Compensating the Exposure
- Taking Pictures using Auto Bracket
- Taking Close-up Pictures
- Taking pictures that match the scene being recorded (Scene mode)
- Motion Picture Mode
- Recording which Day of the Vacation You Take the Picture
- Displaying the Time at the Travel Destination (World Time)
- Using the [REC] Mode Menu
- Taking and viewing clipboard pictures (Clipboard mode)
- Advanced (Playback)
- Connecting to other equipment
- Others
- Screen Display
- Cautions for Use
- Message Display
- Troubleshooting
- Number of Recordable Pictures and Available Recording Time
- Specifications
- Digital Camera Accessory System
- Digital Camera Accessory Order Form (For USA Customers)
- Request for Service Notice (For USA Only)
- Limited Warranty (For USA Only)
- Customer Services Directory (For USA Only)
- Précautions à prendre (pour le Canada)
Advanced (Recording pictures)
59
VQT1J82
or setting [COL.MODE] to [NATURAL].
(P65)
• You cannot use the following functions.
–[D.ZOOM]
– [SLOW SHUTTER]
Press [ ] to display the [REC] mode
menu and select the item to set. (P55)
ISO is a measure of sensitivity to light. The
higher the sensitivity is set, the less light is
needed to take a picture so the camera
becomes more suitable for recording in
dark places.
• When setting to [AUTO], the ISO
sensitivity is automatically adjusted to a
maximum of [ISO200] according to the
brightness. (It can be adjusted to a
maximum of [ISO1000] when using the
flash.)
• To avoid picture noise, we recommend
decreasing maximum ISO sensitivity level
or setting [COL.MODE] to [NATURAL].
(P65)
• The sensitivity automatically switches to
between [ISO1600] and [ISO6400] in
[HIGH SENS.] in scene mode.
• The setting is not available when
[INTELLIGENT ISO] is being used.
([ ] is displayed.)
Press [ ] to display the [REC] mode
menu and select the item to set. (P55)
By changing the aspect ratio, you can
select an angle of view that matches the
subject.
• In motion picture mode [ ], you cannot
select [ ].
• The ends of the recorded pictures may be
cut at printing. (P109)
[SENSITIVITY]
Setting the light sensitivity
ISO sensitivity
100 1600
Use in bright
places
(e.g. outdoors)
Suitable Not suitable
Use in dark
places
Not suitable Suitable
Shutter speed
Slow Fast
Noise
Less Increased
/SET
MENU
[ASPECT RATIO]
Setting the aspect ratio of pictures
Select to take pictures with the
same aspect ratio as a 4:3 TV or a
PC monitor.
Select to take pictures with the
same 3:2 aspect ratio as 35 mm
film.
This is suitable for landscapes etc.
where a wide view is preferable.
This is also suitable for playing
back pictures on a wide-screen
TV, high-definition TV etc.
/SET
MENU
DMC-FX33_ENG.book 59 ページ ２００７年７月９日 月曜日 午後１２時５８分