Digital Camera User Manual
Table Of Contents
- TABLE OF CONTENTS
- Before Use
- Preparation
- Standard Accessories
- Names of the Components
- Quick Guide
- Charging the Battery with the Charger
- About the Battery (charging/number of recordable pictures)
- Inserting and Removing the Card (optional)/the Battery
- About the Built-in Memory/the Card (optional)
- Setting Date/Time (Clock Set)
- About the Mode Dial
- Setting the Menu
- About the Setup Menu
- LCD Monitor Display/Switching the LCD Monitor Display
- Basic
- Advanced (Recording pictures)
- About the LCD Monitor
- Taking Pictures using the Built-in Flash
- Taking Pictures with the Self-timer
- Compensating the Exposure
- Taking Pictures using Auto Bracket
- Taking Close-up Pictures
- Taking pictures that match the scene being recorded (Scene mode)
- Motion Picture Mode
- Recording which Day of the Vacation You Take the Picture
- Displaying the Time at the Travel Destination (World Time)
- Using the [REC] Mode Menu
- Taking and viewing clipboard pictures (Clipboard mode)
- Advanced (Playback)
- Connecting to other equipment
- Others
- Screen Display
- Cautions for Use
- Message Display
- Troubleshooting
- Number of Recordable Pictures and Available Recording Time
- Specifications
- Digital Camera Accessory System
- Digital Camera Accessory Order Form (For USA Customers)
- Request for Service Notice (For USA Only)
- Limited Warranty (For USA Only)
- Customer Services Directory (For USA Only)
- Précautions à prendre (pour le Canada)
Advanced (Recording pictures)
40
VQT1J82
Taking Pictures using
Auto Bracket
In this mode, 3 pictures are automatically
recorded in the selected exposure
compensation range each time the shutter
button is pressed. You can select the
picture with the desired exposure from the
3 pictures with different exposures.
1 Press 3 [ ] several times until
[AUTO BRACKET] appears, set
the compensation range of the
exposure with 2/1.
• You can select [OFF] (0), [d1/3 EV],
[d2/3 EV] or [d1EV].
• When you do not use auto bracket,
select [OFF] (0).
2 Press [MENU/SET] to finish.
• You can also press the shutter
button halfway to finish.
• When setting auto bracket, the auto
bracket icon [ ] appears on the lower
left of the screen.
• When taking pictures using auto bracket
after setting the exposure compensation
range, the pictures taken are based on the
selected exposure compensation range.
When the exposure is compensated, the
exposure compensation value appears on
the lower left of the screen.
• The auto bracket setting is canceled if you
turn the camera off or power save mode is
activated.
• When setting auto bracket and burst mode
simultaneously, auto bracket will be
performed.
• When auto bracket is set, the auto review
function is activated regardless of the auto
review setting. (The picture is not
enlarged.) You cannot set the auto review
function in the [SETUP] menu.
• When auto bracket is activated,
[AUDIO REC.] cannot be used.
• The exposure may not be compensated
with auto bracket depending on the
brightness of the subject.
• When the flash is activated or the number
of recordable pictures is 2 or less, you can
take only 1 picture.
• You cannot use the following functions.
– [HI-SPEED BURST]
– [STARRY SKY]
Taking Close-up
Pictures
This mode allows you to take close-up
pictures of a subject, e.g. when taking
pictures of flowers. You can take pictures of
a subject as close as 5 cm (0.16 feet) from
the lens by rotating the zoom lever upmost
to Wide (1k).
∫ Focus range
• We recommend using a tripod and the
self-timer in macro mode.
• When a subject is close to the camera, the
effective focus range (depth of field) is
significantly narrowed. Therefore, if the
distance between the camera and the
T
W
5 cm
(0.16 feet)
30 cm
(0.98 feet)
DMC-FX33_ENG.book 40 ページ ２００７年７月９日 月曜日 午後１２時５８分