Digital Camera User Manual
Table Of Contents
- TABLE OF CONTENTS
- Before Use
- Preparation
- Standard Accessories
- Names of the Components
- Quick Guide
- Charging the Battery with the Charger
- About the Battery (charging/number of recordable pictures)
- Inserting and Removing the Card (optional)/the Battery
- About the Built-in Memory/the Card (optional)
- Setting Date/Time (Clock Set)
- About the Mode Dial
- Setting the Menu
- About the Setup Menu
- LCD Monitor Display/Switching the LCD Monitor Display
- Basic
- Advanced (Recording pictures)
- About the LCD Monitor
- Taking Pictures using the Built-in Flash
- Taking Pictures with the Self-timer
- Compensating the Exposure
- Taking Pictures using Auto Bracket
- Taking Close-up Pictures
- Taking pictures that match the scene being recorded (Scene mode)
- Motion Picture Mode
- Recording which Day of the Vacation You Take the Picture
- Displaying the Time at the Travel Destination (World Time)
- Using the [REC] Mode Menu
- Taking and viewing clipboard pictures (Clipboard mode)
- Advanced (Playback)
- Connecting to other equipment
- Others
- Screen Display
- Cautions for Use
- Message Display
- Troubleshooting
- Number of Recordable Pictures and Available Recording Time
- Specifications
- Digital Camera Accessory System
- Digital Camera Accessory Order Form (For USA Customers)
- Request for Service Notice (For USA Only)
- Limited Warranty (For USA Only)
- Customer Services Directory (For USA Only)
- Précautions à prendre (pour le Canada)
Advanced (Recording pictures)
38
VQT1J82
• When the shutter speed is fast, the flash
effect may not be sufficient.
• It may take time to charge the flash if you
repeat taking a picture. Take a picture
after the access indication disappears.
• The red-eye reduction effect differs
between people. Also, if the subject was
far away from the camera or was not
looking at the first flash, the effect may not
be evident.
• When the flash is activated, you can only
take 1 picture.
Taking Pictures with
the Self-timer
1 Press 2 [].
2 Press 3/4 to select a mode.
• You can also press 2 [ ] to select.
3 Press [MENU/SET].
• You can also press the shutter
button halfway to finish.
• The menu screen disappears after
about 5 seconds. At this time, the
selected item is automatically set.
4 Press the shutter button halfway
to focus and then press it fully to
take the picture.
A Press the shutter button halfway to
focus.
B Press the shutter button fully to take
the picture.
• The self-timer indicator C blinks and
the shutter is activated after 10 seconds
(or 2 seconds).
• If you press [MENU/SET] while the
self-timer is set, the self-timer setting is
canceled.
• When using a tripod etc., setting the
self-timer to 2 seconds is a convenient
way to avoid the jitter caused by pressing
the shutter button.
• When you press the shutter button once
fully, the subject is automatically focused
just before recording. In dark places, the
self-timer indicator will blink and then may
turn on brightly operating as an AF assist
lamp (P64) to allow the camera to focus
on the subject.
• The self-timer is fixed to 10 seconds in
intelligent auto mode [ ] and to 2
seconds in clipboard mode [ ] or
[SELF PORTRAIT] (P43) in scene mode.
• When you set the self-timer in burst mode,
the camera starts taking a picture 2 or
10 seconds after the shutter button is
pressed. The number of pictures taken at
one time is fixed to 3.
• The self-timer cannot be set in
[HI-SPEED BURST] and
[UNDERWATER] in scene mode.
• We recommend using a tripod when
recording with the self-timer.
A
B
DMC-FX33_ENG.book 38 ページ ２００７年７月９日 月曜日 午後１２時５８分