Operating Instructions

VQT2C70

Advanced (Recording pictures)

[REC] mode: ¿

Taking pictures that match the scene being

recorded

(Scene mode)

When you select a Scene mode to match the subject and recording situation, the camera

sets the optimal exposure and hue to obtain the desired picture.

In [MY SCENE MODE], you can register the Scene mode you use most frequently as one

of the Recording modes.

Slide the [REC]/[PLAYBACK] selector switch to [!], and then press

[MODE].

Press 3/4 to select [ ] ([MY SCENE MODE]), and

then press [MENU/SET].

• If you have already registered My scene mode, the icon for the

registered Scene mode will be displayed, rather than [ ].

Press 3/4/2/1 to select the Scene mode.

Press [MENU/SET] to set.

• The menu screen is switched to the recording screen in the

selected Scene mode.

• The selected Scene mode is registered as My Scene mode, so

that the next time you are recording, you can select it from [REC MODE].

∫ Changing My scene mode

1 Press [MODE], select the third item from the top and press

[MENU/SET].

2 Press [MENU/SET] to display the menu screen.

3 Press 3 to select [¿], switch menus and press 1.

• For details on switching menus, refer to P20.

4 Press 3/4/2/1 to select the Scene mode.

5 Press [MENU/SET] to set.

∫ About the information

• If you press [DISPLAY] when selecting a Scene mode, explanations about each Scene mode

are displayed. (If you press [DISPLAY] again, the screen returns to the Scene mode menu.)

Registering scenes in Scene mode ( : My scene mode)

DMC-FS7&8&6P-VQT2C70_eng.book 46 ページ２００９年２月１７日　火曜日　午前１１時４９分