Digital Camera User Manual

- 51 -
Advanced (Recording pictures)
About the Digital Red-Eye Correction
When [RED-EYE REMOVAL] (P104) has been set to [ON] and Red-Eye Reduction
([ ], [ ], [ ]) is selected, Digital Red-Eye Correction is performed whenever the
flash is used. The camera automatically detects red-eye and corrects the picture. (Only
available when [AF MODE] is set to [š] and Face Detection is active)
Under certain circumstances, red-eye cannot be corrected.
In the following cases, Digital Red-Eye Correction does not work.
When the flash setting is set to [], [] or [Œ]
When [RED-EYE REMOVAL] is set to [OFF]
When [AF MODE] is set to anything except [š]
Available flash settings by Recording Mode
The available flash settings depend on the Recording Mode.
(±: Available, —: Not available, ¥: Scene Mode initial setting)
¢ When [] is selected, [ ], [ ], [ ] or [ ] is set depending on the type of
subject and brightness.
The flash setting may change if the Recording Mode is changed. Set the flash setting again if
necessary.
The flash setting is memorized even if the camera is turned off. However, the Scene Mode flash
setting is reset to the initial setting when the Scene Mode is changed.
ˆ Š Œ ˆ Š Œ
ñ
±
¢
————± í ± ± ——¥
·
±±±± ± ï ————¥
* ±¥±——± 9 ± ± ——¥
+ ±¥±——± ô ———— ¥
±¥±——± ——¥ ———
0 ±¥±——± 5 ———— ¥
, ————¥ 4 ————¥
———— ¥
6 ——¥ ——±
- ¥ ± ——± 8 ¥ ± ——±
. ———¥ ± 7 ————¥
/ ————¥¥ ± ——±
1 ± ± ——¥¥ ± ——±
2 ———¥±± ——± ¥
3 ———±±¥ ¥±±——±
: ±¥±——±
n
———— ±
; ±¥±——±