Operation Manual

VQT2P49 39
●
In [MACRO ZOOM], higher magnification results in lower picture quality.
●
When zoomed macro is specified, Extended Optical Zoom is disabled.
●
We recommend using a tripod, [SELFTIMER], or setting [FLASH] to [FORCED
FLASH OFF].
●
Moving the camera after aligning the focus is likely to result in poorly focused pictures
if subject is close to the camera, due to the margin for focus alignment being severely
reduced.
●
The resolution outside the area in focus may be lower.
Taking pictures at even closer range [MACRO ZOOM]
To take even larger pictures of the subject, setting to [MACRO ZOOM] enables the
subject to appear even larger than when using [AF MACRO].
Touch on the Quick menu (→17)
• You can also set by touching [MACRO
MODE] in the [REC] menu.
Touch [MACRO ZOOM]
• To cancel macro recording, touch [OFF].
• Touch [EXIT] to return to the original screen.
Zoom lever
Adjust the Digital Zoom
magnification with the zoom lever
The zoom position is fixed at the Wide end.
Focus range is 10 cm (0.33 feet) -
∞
.
Return Enlarge
Digital Zoom magnification (1 x to 3 x)
Take a picture