Operation Manual

14 VQT2P49

Setting the Clock (Continued)

Touch [SET]

• To return to the previous screen

→ Touch [CANCEL]

• Turn on the power again and check the time

display.

(Time and date can be displayed by

pressing [DISPLAY] several times.)

To change time setting

Touch [CLOCK SET] from the [SETUP] menu to change the clock settings.

• Clock settings will be saved for approx. 3 months even after battery is removed,

provided a fully-charged battery was installed in the camera for 24 hours beforehand.

Touch [CLOCK SET] from the [REC] menu or [SETUP]

menu (→18)

Set the date and time (steps and ) (→13)

●

Failure to set the date and time will cause the date/time to be improperly printed when

printing pictures at a digital photo center or when using [TEXT STAMP].

●

Year can be set between 2000 and 2099.

●

After the time has been set, the date can be printed correctly even if the date is not

displayed on the camera screen.

■

To set local time at travel

destination

[WORLD TIME] (→54)