Operation Manual

74
Troubleshooting
1: The power does not turn on.
1-1: Are the battery and the AC
adaptor correctly connected?
Check the connection.
1-2: Is the battery sufficiently
charged? Use battery that has
been sufficiently charged.
1-3: Is the REC/power switch slided
fully?
2: As the power is turned on, it
turns off immediately.
2-1: Is the battery charge insufficient
to operate the camera? Charge
the battery or replace it with
charged one.
2-2: Has the condensation occurred?
Carrying the digital camera from
a cold place to a warm place, it
could happen that the
condensation form inside the
camera. Wait until the
condensation disappears.
3: The image cannot be
recorded.
3-1: Is the memory card inside?
3-2: There is no capacity of the card.
Before recording, delete some
images.
3-3: Is the REC/power switch slided
fully?
4: The image is not displayed on
the LCD monitor.
4: Is the LCD monitor set to off?
5: The LCD monitor is too bright
or dark.
5: Adjust the brightness of the LCD
monitor.
6: The flash does not light.
6: The flash mode is set to forced
OFF. Change the flash mode.
7: The image cannot be played
back.
7-1: Is the memory card inside?
7-2: There are no images in the
memory card.
7-3: Is the playback/power switch
slided?
8: The settings are not
memorized.
8-1: [MEMORY] may be set to [OFF].
9: The LCD monitor cannot be
set to off.
9-1: [D.ZOOM] may be set to [ON].
10: The image is not displayed on
the TV.
10-1:Is the camera correctly
connected with the TV? Check it.
10-2:Set the TV to video input mode.
11: When connecting to PC,
images cannot be transferred.
11: Is the camera correctly
connected with PC? Check it.
KC4-PP.book 74 ページ ２００２年１月２１日 月曜日 午後７時５１分