Operation Manual

63
Memorizing settings
If setting [
MEMORY
] to [ON], focus mode,
flash mode and exposure compensation
settings are memorized even after turning
the power off.
[Preparation]
Set the REC/power switch to [ON].
1
Press the [MENU] button.
2
Press
3/4
to select [SETUP] and
then press
1
.
The setup menu will be displayed.
3
Press
3/4
to
select [MEMORY].
4
Press
2/1
to
select [ON].
5
Press the [MENU] button twice.
The menu will disappear.
When setting to [ ] and keeping on pressing
1
it is possible to reset the
settings. (Only the clock setting cannot be reset)
Even if setting [MEMORY] to [OFF], the menu settings remain memorized. (The
exposure compensation setting is not memorized)
1,5
2,3,4
MEMORY
AUTO REVIEW
BEEP
POWER SAVE
NO.RESET
1 / 2
3,4
KC4-PP.book 63 ページ 2002年1月21日 月曜日 午後7時51分