Operation Manual

61
Setting up the Power Save Mode
When setting this mode, the camera, if it is
not operated for certain time, is
automatically turned off.
[Preparation]
Set the REC/power switch to [ON].
1
Press the [MENU] button.
2
Press 3/4 to select [SETUP] and
then press
1 .
• The setup menu will be displayed.
3
Press 3/4 to select [POWER
SAVE].
4
Press 2/1 to select [ON].
• When the camera is in REC mode
and it is not operated for about 2
minutes, the power save mode is set
and after still more about 8 minutes it
is automatically turned off. Moreover,
in playback mode, it is not operated
for about 10 minutes, it is
automatically turned off.
• If selecting [OFF], the power is not
turned off automatically.
5
Press the [MENU] button twice.
• The menu will disappear.
• If you want to cancel the power save mode, press the shutter button halfway or
after setting the REC/power switch to [OFF] set it to [ON] again.
• Do not forget turning the power off in the power save mode.
• Using the AC adaptor, the power save mode is not available.
1,5
2,3,4
POWER SAVE
AUTO REVIEW
BEEP
NO.RESET
MEMORY
1 / 2
3,4
KC4-PP.book 61 ページ ２００２年１月２１日 月曜日 午後７時５１分