Operation Manual

30
Using the Digital Zoom
Using the digital zoom, it is possible to
magnify a subject to 2 times if the picture
size is 800
×
600, and 2.5 times if the
picture size is 600
×
480.
[Preparation]
Set the REC/power switch to [ON]. (P18)
1
Press the [MENU] button.
2
Press
3/4
to select [D. ZOOM].
3
Press
2/1
to set to [ON].
4
Press the [MENU] button.
The menu will disappear.
The zoom adjustment and recording
method are the same as in [Using the
Optical Zoom]. (P29)
If the picture size is 1600
×
1200, it is not
possible to change the zoom
magnification ratio.
In motion image mode [ ], you cannot
use the digital zoom.
When setting the [D. ZOOM] to [ON], if
setting [MOTION IMAGE] to [ON], digital
zoom menu remains [ON]. However, it
does not work. When setting [MOTION
IMAGE] to [OFF], digital zoom returns to
selected operation.
The digital zoom is available only when
the LCD monitor is set to on.
Using the digital zoom, the picture quality
becomes deteriorated.
1,4
2,3
W.BALANCE
EXPOSURE
BURST
MOTION IMAGE
±
0.00
1 / 3
D.ZOOM
KC4-PP.book 30 ページ 2002年1月21日 月曜日 午後7時51分