Operation Manual

27
Checking the Last Picture (Review)
After taking a picture, when auto review
(P59) is set to [ON], the captured picture is
displayed on the LCD monitor for about 2
seconds, but you can also check the
picture following the methods shown
below.
1
After taking a picture, press the
[REVIEW/SET] button.
• The last captured picture is
displayed. Pressing
2/1 , it is
possible to select the picture to
display. Pressing the zoom button
(T), the captured picture is zoomed
2.5 times ( A)
and 4 times if you
press once again. Pressing the zoom
button (W), you will reduce it.
ªErasing the captured picture during
the review
2
Press the [ ] button.
3
Press 2/1 to select [YES].
4
Press the [ ] button or the
[REVIEW/SET] button.
• The picture is erased.
• Once erased pictures cannot be
recovered.
• In motion image mode [ ], the index
picture is reviewed.
2,4
1
3
1
EXIT
REVIEW
REVIEW
KC4-PP.book 27 ページ ２００２年１月２１日 月曜日 午後７時５１分