Operation Manual

26
Taking Pictures
Only pressing the shutter button, the
exposure (shutter speed and aperture
value) will be automatically adjusted and
the picture is taken.
[Preparations]
• Insert the card. (P16)
• Set the REC/power switch to [ON]. (P18)
1
Let the subject be centered in the AF
target
1
inside the optical finder
A
and press the shutter button halfway.
You can take pictures using the LCD
monitor
B
.
• Adjust the focus.
2
Press the shutter button fully to take
the picture.
• After taking a picture, when the auto
review (P59) is set to [ON], the
picture is displayed on the LCD
monitor for about 2 seconds.
• When power saving is set, if you do not operate the camera, it is automatically
turned off. To operate the camera again, set the REC/power switch first to [OFF]
and then to [ON], or press the shutter button halfway. (P61)
1,2
2
AUTO
11
AF
±0.00
KC4-PP.book 26 ページ ２００２年１月２１日 月曜日 午後７時５１分