Operating Instructions

Connecting to networks
26
SQT0437 (ENG)
Connecting to mobile networks
2G/3G/LTE networks can be used to access email, messages and the internet.
For most mobile network operators, the connection is configured automatically
when a microSIM card is inserted.
If the connection is not configured automatically, an access point must be
configured manually.
Check with the mobile network operator with whom you signed the network
contract for the information required when setting the access points.
1
From the Home screen > [ ] > [ ].
2
[More...] > [Mobile networks] > [Access Point Names] >
[].
3
[Name] > enter the name for the new settings > [OK].
4
[APN] > enter the access point name > [OK].
5
Enter other information as required.
≥ The details to enter differ depending on your mobile network operator.
6
[] > [Save].
1
From the Home screen > [ ] > [ ].
2
[More...] > [Mobile networks] > [Access Point Names].
≥ If multiple access points are configured, the currently connected access point will be
indicated.
Configure access point
Check the current access point
DMC-CM1EB-SQT0437_mst.book 26 ページ ２０１４年１０月２２日 水曜日 午後３時３０分